Does wireless turn itself off if no network in area?

X60/X61 series specific matters only.
Post Reply
Message
Author
Trolle
Freshman Member
Posts: 94
Joined: Thu Sep 07, 2006 9:38 pm
Location: Copenhagen, Denmark

Does wireless turn itself off if no network in area?

#1 Post by Trolle » Mon Feb 05, 2007 6:24 am

Does the wireless turn itself off if it cannot detect a network in the area?

I upgraded to the Atheros card for improved performance and to hopefully get rid of the annoying auto-shutdown of the old card. The Atheros card has worked flawlessly, however now I notice it shuts itself off but there are no wireless networks where I am.

tomh009
Moderator Emeritus
Moderator Emeritus
Posts: 3021
Joined: Wed Feb 23, 2005 3:30 pm
Location: Kitchener, ON

#2 Post by tomh009 » Mon Feb 05, 2007 6:52 am

How did you determine that it shut itself off? I have not seen this behaviour ...

lev
Freshman Member
Posts: 110
Joined: Thu Sep 07, 2006 7:42 pm
Location: Northeast/Mid-Atlantic USA

Re: Does wireless turn itself off if no network in area?

#3 Post by lev » Mon Feb 05, 2007 7:08 am

Trolle wrote:Does the wireless turn itself off if it cannot detect a network in the area?

I upgraded to the Atheros card for improved performance and to hopefully get rid of the annoying auto-shutdown of the old card. The Atheros card has worked flawlessly, however now I notice it shuts itself off but there are no wireless networks where I am.
Access Connections will switch off a wireless card if you have a "Best available network" profile, and are connected to a wired network. I don't think this is what you were talking about, though.

Lev
Lev Bishop
X220 (4286-CTO) 8Gb, 160Gb/Intel 320
X60s (1705-44U) 2Gb, 100Gb/7200rpm Retired

atlacatl
Junior Member
Junior Member
Posts: 253
Joined: Thu May 06, 2004 2:09 pm

I see this behaviour.

#4 Post by atlacatl » Mon Feb 05, 2007 5:58 pm

I've seen this happening to my X60s.

The computer tries to connect and if it fails (for whatever reason) the network card goes off.

I don't think of this a problem, really. I look at it more like a feature, i.e., no connection, no power to the card. If I want to use it again, I just go to ThinkVantage Access manager and select "connect" to whatever Wi-Fi hotspot I want.
X200: 2.4 GHz, 4 GB RAM, 160 GP @ RPM drive, WinVista Business 64-bit

X60s (1704-4DU): 1.66 Core Duo, 1.5 GB RAM, 100 GB @ 7200 RPM drive, WinXP Pro

T40p: 1.6 GHz, 1.5 GB RAM, 60 GB @ 7200 rpm drive, 64 MB Video, 802.11 a/b, WinXP Pro

gunston
ThinkPadder
ThinkPadder
Posts: 1306
Joined: Thu Sep 01, 2005 8:00 am
Location: Brisbane, QLD AUST
Contact:

#5 Post by gunston » Mon Feb 05, 2007 6:33 pm

i think the old wireless drive might automatically turn off the wireless if no Wireless Access Point is found in the surrounding area.
1. T43 2668-B97 14" SXGA+ 1.5G RAM 9cells
2. X60s 1703-CA3 powerful

Trolle
Freshman Member
Posts: 94
Joined: Thu Sep 07, 2006 9:38 pm
Location: Copenhagen, Denmark

#6 Post by Trolle » Tue Feb 06, 2007 2:47 am

I know that the card is powered off since the LED is no longer illuminated and I have to manually power on the card from Access Connections.

Since this is happening in my office where I have a wired connection I assume this is what is happening. Thanks.

I was just curious since I had the problem earlier where the card powered itself off during use.

GomJabbar
Moderator
Moderator
Posts: 9765
Joined: Tue Jun 07, 2005 6:57 am

#7 Post by GomJabbar » Tue Feb 06, 2007 10:39 pm

Check out the following link that I just saw in the T60 forum as a solution to the disconnect problem with the Intel 3945abg adapter. I am not sure if something similar would apply to the Atheros adapter or not.

http://blog.st-agnes.org/cs/blogs/the_c ... nt/34.ashx
DKB

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad X6x Series incl. X6x Tablet”

Who is online

Users browsing this forum: No registered users and 14 guests