SD card reader performance?
SD card reader performance?
I'm trying to use the SD card reader in the X60 under XPSP2 with a Transcend 4GB 150x SD card. I benchmarked the drive with sandra and it's nearly an order of magnitude slower than the reference drive benchmarks. I'm pretty sure this isn't the card's issue. I've also heard some people say that the slot works with readyboost under XP so I'm thinking the issue is with the drivers for the sd host controller.
Is anyone experiencing slow performance with the card reader or, conversely, not experiencing the same thing?
Is anyone experiencing slow performance with the card reader or, conversely, not experiencing the same thing?
-
First Light
- Sophomore Member
- Posts: 170
- Joined: Sat May 15, 2004 9:19 pm
- Location: USA
Re: SD card reader performance?
I'm having no problems downloading my Sandisk Extreme III 2g SD card that is frequently filled to near capacity.rkuo wrote:I'm trying to use the SD card reader in the X60 under XPSP2 with a Transcend 4GB 150x SD card. I benchmarked the drive with sandra and it's nearly an order of magnitude slower than the reference drive benchmarks. I'm pretty sure this isn't the card's issue. I've also heard some people say that the slot works with readyboost under XP so I'm thinking the issue is with the drivers for the sd host controller.
Is anyone experiencing slow performance with the card reader or, conversely, not experiencing the same thing?
But in reference to your first paragraph, I have no idea what you are asking.
-
thibouille27
- Junior Member

- Posts: 311
- Joined: Thu Mar 30, 2006 11:51 am
- Location: Brussels, Belgium
You're right the reader is painfully slow. All the readers built into laptops are awfully slow.
Get a SD/SDHC to PcCard adapter or a USB2 external reader if speed is important. I myself find it more or less important, using high speed cards when I dump pics from my DSLR.
Get a SD/SDHC to PcCard adapter or a USB2 external reader if speed is important. I myself find it more or less important, using high speed cards when I dump pics from my DSLR.
TP X23 +UBX2 +cdrw
TP X60 +UBX6 +dvdrw slim + floppy + 8cells battery
TP X60 +UBX6 +dvdrw slim + floppy + 8cells battery
-
thibouille27
- Junior Member

- Posts: 311
- Joined: Thu Mar 30, 2006 11:51 am
- Location: Brussels, Belgium
-
stephenyeong
- Posts: 3
- Joined: Wed Apr 18, 2007 1:40 am
- Location: Hong Kong
I've try using build-in SD Reader for Readyboost, the performance is bad.
Although the SD Reader reading speed is not too slow, it make too many Processor Interrupt and make audio playback stop.
Use "Reliability and Performance Monitor" to make a graph. Add Processor Interrupts/sec
You will see about 2,000 Ips (Interrupts/sec) at normal.
When I chkdsk C:, it will up to about 2,200 Ips, I think defragment should below 2,500 Ips.
After I plug in a SD to SD Reader and active Readyboost, the Interrupts/sec sometimes jump to 14,000 Ips !!!!
Also I make the following test. Format a 2GB Class 6 SD (~15MB Write per second, 22MB Read per second on my USB Card Reader)
Use Build-in SD Reader to format, reading around 14,000 Ips.
Use USB Card Reader, reading around 3,000 Ips
Final word, the build-in SD Card Reader create about 12K more Interrupts per second when run the card at full speed.
PS. I don't know why my X60 get 2,000 Ips at normal. When I compare with the other X60 running XP, reading is about 200 Ips. However, the Card reader test still valid because coping a large file from Disk to SD still on that X60 aslo create 12K more Interrupts per second.
Although the SD Reader reading speed is not too slow, it make too many Processor Interrupt and make audio playback stop.
Use "Reliability and Performance Monitor" to make a graph. Add Processor Interrupts/sec
You will see about 2,000 Ips (Interrupts/sec) at normal.
When I chkdsk C:, it will up to about 2,200 Ips, I think defragment should below 2,500 Ips.
After I plug in a SD to SD Reader and active Readyboost, the Interrupts/sec sometimes jump to 14,000 Ips !!!!
Also I make the following test. Format a 2GB Class 6 SD (~15MB Write per second, 22MB Read per second on my USB Card Reader)
Use Build-in SD Reader to format, reading around 14,000 Ips.
Use USB Card Reader, reading around 3,000 Ips
Final word, the build-in SD Card Reader create about 12K more Interrupts per second when run the card at full speed.
PS. I don't know why my X60 get 2,000 Ips at normal. When I compare with the other X60 running XP, reading is about 200 Ips. However, the Card reader test still valid because coping a large file from Disk to SD still on that X60 aslo create 12K more Interrupts per second.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Transcend Express Card Reader for SD/SDHC/SDXC/UHS-1 (TS-RDF1) ?
by Digitalhorizons » Mon Feb 27, 2017 11:16 am » in ThinkPad X200/201/220 and X300/301 Series - 13 Replies
- 1447 Views
-
Last post by automobus
Wed Mar 08, 2017 9:58 am
-
-
-
T61 pcmcia sd card reader extremely slow
by alisan » Thu May 25, 2017 6:14 am » in ThinkPad T6x Series - 10 Replies
- 572 Views
-
Last post by Omineca
Thu Jun 01, 2017 4:47 pm
-
-
-
SOLD: PCMCIA Smart Card Reader/writer
by RealBlackStuff » Thu May 25, 2017 10:56 am » in Marketplace - Forum Members only - 0 Replies
- 145 Views
-
Last post by RealBlackStuff
Thu May 25, 2017 10:56 am
-
-
-
T420: mSATA SSD performance issue [SOLVED]
by Farro » Tue Mar 07, 2017 3:56 am » in ThinkPad T400/410/420 and T500/510/520 Series - 2 Replies
- 994 Views
-
Last post by jaspen-meyer
Tue Mar 07, 2017 5:00 pm
-
Who is online
Users browsing this forum: No registered users and 1 guest




