Page 1 of 1
Creating Recovery Disks - freezes = failure
Posted: Wed Aug 22, 2007 3:27 am
by jamess
I've tried making recovery disks, but task doesn't complete. First I insert normal CD-R and I label it Start Recovery Disk. I then insert the 2nd disk, that is DVD+R. And it then freezes. Even if I cancel, nothing happens. Any ideas?
PS: I have disabled UAC in Vista but that doesn't make any difference.
Posted: Wed Aug 22, 2007 5:44 am
by phongdt
This may because of your burner and DVD compatibility issue. Last time it took me more than 10 DVD before it successed. Everytime, it freeze in the middle. Try again.
Posted: Wed Aug 22, 2007 5:48 am
by jamess
There are supposed to be only 2 discs right?
First one (start disk) = CD-R
Second = DVD
??
Thanks
Posted: Wed Aug 22, 2007 5:53 am
by phongdt
Yes, there are 2 disc only. The 1st one can be a CD-R, the 2nd one is a DVD. Pls note DVD-RAM is not supported.
Posted: Wed Aug 22, 2007 6:42 am
by GomJabbar
AFAIK, you can use all CD/R's (about 7 of them). At least this was true with the T4x series recovery discs.