how to connect to TV?

Message

roudan · #1 Post by **roudan** » Sun Apr 27, 2008 9:44 am

The picture was not shown in TV, only sound. And The TV is automatically turned off. Could anybody tell me how to make connection wit TV work? Thanks.

Yongnuan

sktn77a · #2 Post by **sktn77a** » Sun Apr 27, 2008 10:05 am

Which computer? How did you connect it? Need more info. Unless your TV has an RGB computer input, it appears a VGA to TV (Composite/S-Video/Component) converter box is required on the T6x series.

roudan · #3 Post by **roudan** » Sun Apr 27, 2008 3:54 pm

sktn77a wrote:Which computer? How did you connect it? Need more info. Unless your TV has an RGB computer input, it appears a VGA to TV (Composite/S-Video/Component) converter box is required on the T6x series.

Hi Sktn77a

My computer is X61 Tablet. I just use VGA cable connecting between PC and TV. It works with my Dell and Toshiba old laptop.Thanks.

sktn77a · #4 Post by **sktn77a** » Sun Apr 27, 2008 5:00 pm

Unfortunately, TV output doesn't appear to be supported from the current thinkpads. I had to get a VGA to TV converter box to do this with my T61p:

http://cgi.ebay.com/Brand-NEW-VGA-Compu ... dZViewItem

fongj · #5 Post by **fongj** » Sun Apr 27, 2008 9:59 pm

I'v output from the VGA on my X61t to a HD LCD TV without problems.

sktn77a, why/how isn't outputting to a TV isn't supported? Is it a NTSC vs. PAL issue?

sktn77a · #6 Post by **sktn77a** » Mon Apr 28, 2008 9:31 am

Well, if you search the threads on this forum, you'll find that the T61 series doesn't support TV out through VGA. I don't think it's a PAL/NTSC issue. Your video (DVI?) to HDMI may be possible as this is all digital but for analog Composite/S-Video/Component, I think you may be out of luck. I'm not sure you got sound out of your video connection (or were you using the headphone output from your thinkpad)?

efrant · #7 Post by **efrant** » Mon Apr 28, 2008 12:04 pm

fongj wrote:I'v output from the VGA on my X61t to a HD LCD TV without problems.

sktn77a, why/how isn't outputting to a TV isn't supported? Is it a NTSC vs. PAL issue?

I think what sktn77a is trying to say is that analog is not supported via the VGA port. So, if your TV accepts a digital signal, then no problem, it will work. But if your TV requires an analog signal (either via VGA, s-video, or component) then it will not work, and you will need to purchase a digital-to-analog converter. Older thinkpads used to send both analog and digital signal over the VGA port, but not the 6x series.

roudan · #8 Post by **roudan** » Mon Apr 28, 2008 12:53 pm

Hi all

My TV is sony HD LCD. I believe it accept digital signal. Thanks.

fongj · #9 Post by **fongj** » Tue Apr 29, 2008 3:05 pm

efrant wrote:
fongj wrote:I'v output from the VGA on my X61t to a HD LCD TV without problems.

sktn77a, why/how isn't outputting to a TV isn't supported? Is it a NTSC vs. PAL issue?
I think what sktn77a is trying to say is that analog is not supported via the VGA port. So, if your TV accepts a digital signal, then no problem, it will work. But if your TV requires an analog signal (either via VGA, s-video, or component) then it will not work, and you will need to purchase a digital-to-analog converter. Older thinkpads used to send both analog and digital signal over the VGA port, but not the 6x series.

VGA is an analog signal by design/specification. It is analog coming out the VGA port on the Thinkpad.

http://en.wikipedia.org/wiki/Video_Graphics_Array

I'm not sure why we're talking about "TV out". Since roudan just wants to use the VGA output, there is no "TV out" (s-video, or otherwise) that comes into play. This is is just like any other VGA output to an external monitor or LCD/DLP projector, except the destination happens to be an HD TV.

roudan, what exactly are you trying to show on the TV? Is it just your desktop? a Powerpoint presentation? or is there some sort of video/movie? The fact that the TV turns off means its not getting any signal at all. Do you have it looking for the right input?

Also, I just noticed this is the T6x forum when the OP is having this issue with his X61t.... (I have both, so I didn't catch that earlier...). Any quick/easy way to tell Moderator to move this thread?

#10 Post by **gator** » Tue Apr 29, 2008 4:02 pm

Moved to X6x conference.

roudan · #11 Post by **roudan** » Wed Apr 30, 2008 11:30 am

fongj wrote:
efrant wrote: I think what sktn77a is trying to say is that analog is not supported via the VGA port. So, if your TV accepts a digital signal, then no problem, it will work. But if your TV requires an analog signal (either via VGA, s-video, or component) then it will not work, and you will need to purchase a digital-to-analog converter. Older thinkpads used to send both analog and digital signal over the VGA port, but not the 6x series.
VGA is an analog signal by design/specification. It is analog coming out the VGA port on the Thinkpad.

http://en.wikipedia.org/wiki/Video_Graphics_Array

I'm not sure why we're talking about "TV out". Since roudan just wants to use the VGA output, there is no "TV out" (s-video, or otherwise) that comes into play. This is is just like any other VGA output to an external monitor or LCD/DLP projector, except the destination happens to be an HD TV.

roudan, what exactly are you trying to show on the TV? Is it just your desktop? a Powerpoint presentation? or is there some sort of video/movie? The fact that the TV turns off means its not getting any signal at all. Do you have it looking for the right input?

Also, I just noticed this is the T6x forum when the OP is having this issue with his X61t.... (I have both, so I didn't catch that earlier...). Any quick/easy way to tell Moderator to move this thread?

I just like to show movies in TV. I did it using mtyDell, Toshiba Laptops with no problem.

Thanks for moving to X6X. Sorry about that.

fongj · #12 Post by **fongj** » Wed Apr 30, 2008 9:04 pm

Try to get just your desktop to show up on your TV first, then we can go from there.

Are you using Thinkvantage Presentation Director?

roudan · #13 Post by **roudan** » Wed Apr 30, 2008 9:46 pm

fongj wrote:Try to get just your desktop to show up on your TV first, then we can go from there.

Are you using Thinkvantage Presentation Director?

how to show desktop? Thanks.

roudan · #14 Post by **roudan** » Wed Apr 30, 2008 11:03 pm

always no pc signal

rhema83 · #15 Post by **rhema83** » Thu May 01, 2008 10:18 am

Did you press FN-F7 to switch the display mode to external? Sometimes people forget...

gunston · #16 Post by **gunston** » Fri May 02, 2008 7:48 pm

Fn+F7, choose the screen resolution that display correctly in your screen.

how to connect to TV?

how to connect to TV?

Who is online