Hard drive speeds 5400 vs. 7200

X60/X61 series specific matters only.
Message
Author
bill bolton
Admin
Admin
Posts: 3848
Joined: Thu Sep 01, 2005 10:09 am
Location: Sydney, Australia - Best Address on Earth!

#31 Post by bill bolton » Thu May 08, 2008 6:05 pm

erik wrote:if you don't like it, go on the internet and complain. :lol:

My points simply were, and remain:

1. My Hitachi is not dead quiet by any absolute or relative measure, I can certainly hear it in operation.

2. My Hitachi is actually noiser than my Seagates in my operating conditions.

Clearly there are a wide range of experiences as far drive noise levels go.
thormdac wrote: happy with the constant "clunckling" when the head parks?
I'm not experiencing any clunckling with my Seagate drives here!

Cheers,

Bill B.

erik
moderator
moderator
Posts: 3596
Joined: Sun Apr 25, 2004 12:52 pm
Location: United States

#32 Post by erik » Thu May 08, 2008 6:31 pm

bill, my comment quoted above regarding your 7K200 was meant purely a joke and should be taken as such.   if you find that your seagate drives are better then that's perfectly fine.   i wasn't arguing with you or trying to refute any points you were trying to make.

to everyone, i apologize for using the term "dead silent" in this context.   i never imagined it would be taken so literally.
ThinkStation P700 · C20 | ThinkPad P40 · 600

thormdac
Freshman Member
Posts: 88
Joined: Sat Mar 24, 2007 2:59 pm
Location: south-african alien in germany

#33 Post by thormdac » Fri May 09, 2008 12:10 am

@bill
yeah,
didnt mean to upset you, bill!

next time around in australia, i will bring my 2. hitachi `round and let you have "taste" :lol:
X300 / 6478-15G
| X60s | 1702-5PG | 2GB | 100GB Hitachi 7K200, 3. Generation | XP prof |
/ T60 / 2007-FVG / 2GB / 100GB / XP prof

adrianaitken
Sophomore Member
Posts: 179
Joined: Wed May 02, 2007 5:38 pm
Location: Jersey,UK

#34 Post by adrianaitken » Sat May 10, 2008 8:27 am

So before everyone starts hitting each other and getting back to my original question.
7200 = faster than 5400 and SSD (except cheap Transcend) = faster than hard disk. Everyone agree ?
And Eric, as a technical engineer I understand 'dead silent' as meaning just a figure of speech qualification !!!! :D
X60 - upgraded to a X61 2.5Ghz motherboard and 8GB RAM (Windows 7 Ultimate 64 bit) 64GB SSD
X61 - 2Ghz and 4GB RAM (Windows 7 Home Premium 64 bit) 32GB SSD
USB DVD-RW DL/Blu-Ray reader

thormdac
Freshman Member
Posts: 88
Joined: Sat Mar 24, 2007 2:59 pm
Location: south-african alien in germany

#35 Post by thormdac » Sat May 10, 2008 8:54 am

@adrianaitken

yes baby, you`ve got it... :D
X300 / 6478-15G
| X60s | 1702-5PG | 2GB | 100GB Hitachi 7K200, 3. Generation | XP prof |
/ T60 / 2007-FVG / 2GB / 100GB / XP prof

loyukfai
ThinkPadder
ThinkPadder
Posts: 1085
Joined: Tue Aug 08, 2006 2:08 pm
Location: Hong Kong

#36 Post by loyukfai » Sat May 10, 2008 3:31 pm

adrianaitken wrote:7200 = faster than 5400 and SSD (except cheap Transcend) = faster than hard disk. Everyone agree ?
Not from me... : )

If you're talking about ONLY random reads, then the answer is probably yes.

See the article linked below if you're interested in the details.

http://www.xbitlabs.com/articles/storag ... -iram.html

thormdac
Freshman Member
Posts: 88
Joined: Sat Mar 24, 2007 2:59 pm
Location: south-african alien in germany

#37 Post by thormdac » Sat May 10, 2008 3:56 pm

@loyukfai,

intresting article!-- though absolutely irrellevant to our discussion- " Iram "boasts" a maximum of 4 gigabyte storage :lol:

quote: "The maximum capacity of 4 gigabytes is unserious, too."
X300 / 6478-15G
| X60s | 1702-5PG | 2GB | 100GB Hitachi 7K200, 3. Generation | XP prof |
/ T60 / 2007-FVG / 2GB / 100GB / XP prof

adrianaitken
Sophomore Member
Posts: 179
Joined: Wed May 02, 2007 5:38 pm
Location: Jersey,UK

#38 Post by adrianaitken » Sun May 11, 2008 9:43 am

thormdac, my X61 doesn't have a PCI slot in it so the iRAM is not an option !!!! Wonder why Gigabyte didn't just add a SATA controller on the card making it an all-in-one solution.
X60 - upgraded to a X61 2.5Ghz motherboard and 8GB RAM (Windows 7 Ultimate 64 bit) 64GB SSD
X61 - 2Ghz and 4GB RAM (Windows 7 Home Premium 64 bit) 32GB SSD
USB DVD-RW DL/Blu-Ray reader

loyukfai
ThinkPadder
ThinkPadder
Posts: 1085
Joined: Tue Aug 08, 2006 2:08 pm
Location: Hong Kong

#39 Post by loyukfai » Sun May 11, 2008 11:29 am

Sorry I wasn't clear enough, but it's not my intent to compare flash with RAM.

Flash memory's write operations are relatively slow compared to its read operations. Even slower than platter-based disc drives as I understand.

And it's over simplified to say that, SSD is faster than 7200RPM drive.

richarddd
Sophomore Member
Posts: 205
Joined: Fri Aug 20, 2004 6:08 pm

#40 Post by richarddd » Sun May 11, 2008 2:54 pm

Write speed was slow in early SSD's. The latest generation is much faster than any notebook HDD. Read/write about 120 MBs and access time almost 0.

erik
moderator
moderator
Posts: 3596
Joined: Sun Apr 25, 2004 12:52 pm
Location: United States

#41 Post by erik » Sun May 11, 2008 10:44 pm

agreed.   the samsung SSD in my X300 kills the 7K200 in my X61 according to HDTune.

note: the term "kills" used in this context is another figure of speech.   the SSD doesn't actually commit mortal physical harm to the 7K200. :P :lol:
ThinkStation P700 · C20 | ThinkPad P40 · 600

loyukfai
ThinkPadder
ThinkPadder
Posts: 1085
Joined: Tue Aug 08, 2006 2:08 pm
Location: Hong Kong

#42 Post by loyukfai » Mon May 12, 2008 9:15 am

richarddd wrote:Write speed was slow in early SSD's. The latest generation is much faster than any notebook HDD. Read/write about 120 MBs and access time almost 0.
If you're talking about the most expensive models out there, then I think SSD is faster than 7200RPM is probably true for most, if not all, cases. : )

Cheers.

Justintoxicated
Freshman Member
Posts: 118
Joined: Wed Jan 02, 2008 2:52 pm
Location: Long Bach, CA

#43 Post by Justintoxicated » Wed May 14, 2008 12:52 am

thormdac wrote:@bill,

uh, oh...a seagate! happy with the constant "clunckling" when the head parks? :? :cry:
Mine makes no noise, its no louder the the 90GB hitachi that came in it. But this one is faster being a 200GB 7200RPM drive.

adrianaitken
Sophomore Member
Posts: 179
Joined: Wed May 02, 2007 5:38 pm
Location: Jersey,UK

#44 Post by adrianaitken » Wed May 14, 2008 4:55 pm

Well, I solved the dilemma by winning a Sandisk 32Gig SSD on ebay for only US$450. Claims to have 65M/s read, 55 M/s write which is still twice as fast as my existing disk !!!
I'm now looking at a NAS solution to store my main stuff. And I thought photography drained my wallet :shock:
X60 - upgraded to a X61 2.5Ghz motherboard and 8GB RAM (Windows 7 Ultimate 64 bit) 64GB SSD
X61 - 2Ghz and 4GB RAM (Windows 7 Home Premium 64 bit) 32GB SSD
USB DVD-RW DL/Blu-Ray reader

adrianaitken
Sophomore Member
Posts: 179
Joined: Wed May 02, 2007 5:38 pm
Location: Jersey,UK

#45 Post by adrianaitken » Wed May 21, 2008 9:49 am

My Sandisk SSD arrived and is at least as fast as the 5400 Fujistu that was in there.
Now, whose got a MP3 of a hard disk whirling and clunking that I can play in the background cos it's disturbingly quiet now :lol:
X60 - upgraded to a X61 2.5Ghz motherboard and 8GB RAM (Windows 7 Ultimate 64 bit) 64GB SSD
X61 - 2Ghz and 4GB RAM (Windows 7 Home Premium 64 bit) 32GB SSD
USB DVD-RW DL/Blu-Ray reader

jamess
Junior Member
Junior Member
Posts: 377
Joined: Mon Jul 03, 2006 3:45 pm
Location: Ljubljana, Slovenia, European Union

#46 Post by jamess » Wed May 21, 2008 12:51 pm

I've had Hitachi 7K200 in my X61 Tablet with boot up of over 130 seconds before "steady" (which never is in Vista). With Samsung SSD in X300 I get it up "steady" in about 35 seconds. Same OS, same programs and services and startup items running. In my case, SSD is much faster than 7200 rpm HDD and 7200 rpm was a bit faster than 5400 at boot up. 7K200 in my experience was worth the upgrade from 5400, not just for the sake of few seconds boot up time but mostly for working with bigger files. Just my impressions...
X300... own
X61 Tablet... sold
X60s... sold
T60p... sold
T43... sold

crashnburn
ThinkPadder
ThinkPadder
Posts: 1643
Joined: Sat Apr 22, 2006 4:26 pm
Location: TX, USA & Bombay, India

#47 Post by crashnburn » Wed May 21, 2008 9:39 pm

So for the CONTEXT here:

X6x laptops
5400 vs 7200 HDDs.

What conclusion can we derive?
T61 8892-02U: 14.1"SXGA+/2.2C2D/4G/XP|Adv Mini Dock|30" Gateway XHD3000 WQXGA via Dual-link DVI
X61T 7767-96U: 12.1"SXGA+/1.6C2D/3G/Vista|Ultrabase
W510 4319-2PU: 15.6"FHD/i7-720QM/4G/Win7Pro64 (for dad)
T43 1875-DLU: 14.1"XGA/1.7PM-740/1G/XP (Old)

adrianaitken
Sophomore Member
Posts: 179
Joined: Wed May 02, 2007 5:38 pm
Location: Jersey,UK

#48 Post by adrianaitken » Thu May 22, 2008 1:13 am

crashnburn - see above !!! But then I won a SSD on eBay :lol:
X60 - upgraded to a X61 2.5Ghz motherboard and 8GB RAM (Windows 7 Ultimate 64 bit) 64GB SSD
X61 - 2Ghz and 4GB RAM (Windows 7 Home Premium 64 bit) 32GB SSD
USB DVD-RW DL/Blu-Ray reader

snots
Freshman Member
Posts: 88
Joined: Fri Apr 11, 2008 11:38 am
Location: Ann Arbor, MI

#49 Post by snots » Thu May 22, 2008 7:21 am

In my opinion, (since I have a 5400 rpm lol), its not too big of a deal if your hard drive is properly defragged and all your doing on your tablet is mostly inking and working with pdf's and documents.

Unless I'm moving video files back and forth, the big-file speedup advantage won't be that significant I should think..

adrianaitken
Sophomore Member
Posts: 179
Joined: Wed May 02, 2007 5:38 pm
Location: Jersey,UK

#50 Post by adrianaitken » Thu May 22, 2008 9:50 am

Thats what I used to think !!!!
However, loading megapixel digital camera images for editting shows the benefits of speed :o as does having 4Gig of RAM (currently running Server 08 to test it out). Yes, 5400RPM and 1Gig of RAM means I could still work but it would be far slower.
It all depends on what you use the laptop for - mainly surfing (a X6 series is overkill fullstop for that), onsite editing of images etc etc
X60 - upgraded to a X61 2.5Ghz motherboard and 8GB RAM (Windows 7 Ultimate 64 bit) 64GB SSD
X61 - 2Ghz and 4GB RAM (Windows 7 Home Premium 64 bit) 32GB SSD
USB DVD-RW DL/Blu-Ray reader

snots
Freshman Member
Posts: 88
Joined: Fri Apr 11, 2008 11:38 am
Location: Ann Arbor, MI

#51 Post by snots » Thu May 22, 2008 2:33 pm

adrianaitken wrote:Thats what I used to think !!!!
However, loading megapixel digital camera images for editting shows the benefits of speed :o as does having 4Gig of RAM (currently running Server 08 to test it out). Yes, 5400RPM and 1Gig of RAM means I could still work but it would be far slower.
It all depends on what you use the laptop for - mainly surfing (a X6 series is overkill fullstop for that), onsite editing of images etc etc
Hmm yea thats a good point. I can imagine the speed decrease if you are cycling through a bunch of 2-3 MB images or greater.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad X6x Series incl. X6x Tablet”

Who is online

Users browsing this forum: No registered users and 9 guests