Page 1 of 1
Was X60 tablet 6363 A13 multiview ?
Posted: Fri Jan 29, 2010 9:39 am
by xyz
Hi
Can somone check for me if the x60 tablet 6363 a13 was a mulit view variaint, I can't remeber if it was or wasn't ?
Just had some work done by ibm and they have replace the screen woith a toshiba variant.. can someone pelase check this for me.
Re: Was X60 tablet 6363 A13 multiview ?
Posted: Fri Jan 29, 2010 5:50 pm
by xyz
Anyone have an update, ?
As it stand my machine has gone in for repiar and come back with a toshiba panel in it, and with a non working digitiser too, so its going back to them on tuesday, just needed some confirmation what type of lcd that machine should have had in it, I can't remember,
Re: Was X60 tablet 6363 A13 multiview ?
Posted: Sat Jan 30, 2010 12:25 am
by ajkula66
According to this page, it's a standard XGA tablet panel...
Product: ThinkPad X60 Tablet 6363-A13 [change]
Operating system: All [change]
Original description: Based on 6363-64G: L2500(1.83GHz), 2GB RAM, 60GB 7200rpm HD, 12.1in 1024x768 LCD, Intel 950, 802.11abg wireless, Modem, 1Gb Ethernet, Secure chip, Fingerprint reader, 8c Li-Ion, WinXP Tablet 2005
Re: Was X60 tablet 6363 A13 multiview ?
Posted: Sat Jan 30, 2010 1:50 am
by dr_st
It wouldn't list it there if it was "touch". Just look up any model type that is definitely a Multiview/Multitouch, e.g., 6363-7BU (from Tabook).
The HMM doesn't really help either. I guess the only way is to o a part number lookup with the original serial number.
Re: Was X60 tablet 6363 A13 multiview ?
Posted: Sat Jan 30, 2010 8:27 am
by xyz
No its defo not touch as I have a touch one and that lists it in the description as a touch.
What I wanted to clarify was should it be an ips type panel or a tn panel.
As it is the mahcine has been replaced with a tn panel and its not been done too good as the digitser is not working not is the dipsplay suspending when you close the lid, and some other issues ,
So its going back to them to correct..
Problem is I never had a chance to check what the panel was beforeit went to repair and I got the machine with a broken backlight, and was under the impression that it should have been a flexview/ ips/ multiview / wide angle type machine.
When I look up the parts via the serial i get
mfg :42T0348 fru: 0000000 12.1 INCH LCD DISPLAY:FLAT PANEL DISPLAY
Re: Was X60 tablet 6363 A13 multiview ?
Posted: Sat Jan 30, 2010 9:10 am
by ajkula66
Normally, tablets have IPS/AFFS panels, and not TN, regardless of multiview/multitouch...
So you have quite a case...
Good luck.
Re: Was X60 tablet 6363 A13 multiview ?
Posted: Sat Jan 30, 2010 10:48 am
by xyz
Thats what I thought just wanted to clear it up, it will be interesting to see what happens.
The tn panel is quite terrible.