Thinkpads Forum

I went to the parts lookup on Lenovo's website, and the FRU is listing a bunch of 0's (see below):

Anyone know where I can source the exact same LCD? I hit the LCD w/ my foot while the computer was on the floor, and the digitizer works (the outer glass is intact), but the inner LCD is broken...it's a 6366-8KU, and I didn't see the "8KU" listed in the Lenovo service manual...seems like I could jsut take apart my bezel and replace the LCD if I had the right part, right?

Also, is the Multitouch LCD a specific LCD, or is it just the digitizer that makes it "multitouch"? Cuz then I could just replace the LCD itself...they seem to go on ebay for like $150?


Parts shipped with your system

Type: 6366 [change]

Serial #: xxxxxxx [change]





Mfg part # FRU part # Description Serviceable?



13N7175 0000000 12.1 INCH HYDIS TABLET LCD DISPLAY, WITH NO



29R7080 0000000 COA LABEL, WINDOWS XP TABLET PC EDITION NO



29R8740 0000000 MICROSOFT OFFICE ONE NOTE 2003, US ENGLI NO



36P3366 40Y8403 1GB PC2 5300NP FRU NO



39T0494 39T0495 FRU ADONID MDC-1.5 ADAPTER YES



39T2611 39T2643 HDD SATA 100GB5400RPM FUJITSU SECONDARY YES



39T5670 0000000 CALISTO (BDC-2) ADAPTER:WIRELESS COMBO A NO



39T7234 39T7265 FRU-KS KBD NMB US ENGLISH YES



41W1426 41W1474 PLANAR:YONAH DC LV L2500(1.83 GHZ) YES



42T0824 42T0825 BRDCM BG SKU 802.11MINI PCI-E YES



42T5209 42T4661 SANYO 8 CELL BATTERY FRU YES



92P1156 42T5282 65 WATT 2 PIN AC ADAPTER FRU YES

The FRU# is 13N7216

http://www-307.ibm.com/pc/support/site. ... -67024#xga+


Product: ThinkPad X60 Tablet 6366-8KU [change]
Operating system: All [change]

Original description: L2500(1.83GHz), 1GB RAM, 100GB 5400rpm HD, 12.1in 1024x768 LCD Touchscreen, Intel 950, 802.11n wireless, Bluetooth/Modem, 1Gb Ethernet, Secure chip, IEEE 1394, Fingerprint reader, 8c Li-Ion batt, WinXP Tablet 2005

$$Pray that you didn't break the digitizer.$$

http://cgi.ebay.com/IBM-LENOVO-13N7216- ... 0251251334

Wow...thanks for the respose so fast! So um...the LCD part...is the "MultiTouch" part of the screen referring to the digitizer? So, i.e. really I can use any LCD panel replacement, including this one? In other words, if the digitizer is working (I can use my finger to move the cursor around the screen), then replacing the panel w/ said part will NOT affect my ability to use my finger to move the cursor?

http://www.etech.com/item--NYK211-040

It says it's the "matte" one while the "glossy" one is another type of panel. I think the digitizer is a separate layer on top of the LCD right? If so, is the digitizer the layer that's giving the LCD the "matte" look? If so, then should I get the glossy or the matte LCD?

Thanks...also a helpful individual here offered to replace the LCD w/ a X61 assembly; however, I'm concerned about the different part numbers and wonder whetehr the X61 tablet LCD assembly would work in the X60 tablet and/or cause warranty problems (system is under warranty...I understand this repair would NOT be under warranty, but I'm concerned about voiding the rest of the warranty).

Thanks

Get a matte LCD. The digitizer is separate. If you replace the LCD and the digitizer is working, then touch screen will also work.