Bezel Separation in X61s
-
tabpclover
- Posts: 30
- Joined: Sat Apr 03, 2010 6:55 pm
- Location: NSW, Australia
Bezel Separation in X61s
Dear X61s owners,
I am a long time X61tablet owner who was bitten time and again with the bezel separation bug.
I have recently bought the X61s and I feel (I may be oversensitized) that there is ever so mild bezel separation issue in X61s. The lower bezel margin has 2 screws on the left but only 1 screw on the right. When I look at the bezel approximation to the screen at an angle from the top I get the feeling that the bezel is in close approximation with the screen on the left aspect of the screen. However on the right side there is probably around 0.5 mm gap between the bezel and the screen. Dont get me wrong- there are no popping noises but the bezel looks less approximated on the right side. Thankfully it does not appear that this will increase. I think the reason is obviously lesser support on the right with only a single screw compared to 2 on the left.
thanks for sharing your experience,
(despite the bezel and everything I love my thinkpads- sign of an addict??)
I am a long time X61tablet owner who was bitten time and again with the bezel separation bug.
I have recently bought the X61s and I feel (I may be oversensitized) that there is ever so mild bezel separation issue in X61s. The lower bezel margin has 2 screws on the left but only 1 screw on the right. When I look at the bezel approximation to the screen at an angle from the top I get the feeling that the bezel is in close approximation with the screen on the left aspect of the screen. However on the right side there is probably around 0.5 mm gap between the bezel and the screen. Dont get me wrong- there are no popping noises but the bezel looks less approximated on the right side. Thankfully it does not appear that this will increase. I think the reason is obviously lesser support on the right with only a single screw compared to 2 on the left.
thanks for sharing your experience,
(despite the bezel and everything I love my thinkpads- sign of an addict??)
x220 tablet, X61 tab, X61s, X60s, HP 2760p
Re: Bezel Separation in X61s
There is a small piece of tacky two-sided adhesive in this area.. it may have gotten un-sticky or something. If it concerns you, you could take the front bezel off and re-apply a bit of tape there.
MacBook Pro Retina 13.3 2560x1600 | i5-4258U | 8GB | 256GB SSD | BT+abgnac
Surface Pro 3 12.0 2160x1440 | i5-4300U | 8GB | 256GB SSD | BT+abgnac
Surface Pro 3 12.0 2160x1440 | i5-4300U | 8GB | 256GB SSD | BT+abgnac
-
tabpclover
- Posts: 30
- Joined: Sat Apr 03, 2010 6:55 pm
- Location: NSW, Australia
Re: Bezel Separation in X61s
rek wrote:There is a small piece of tacky two-sided adhesive in this area.. it may have gotten un-sticky or something. If it concerns you, you could take the front bezel off and re-apply a bit of tape there.
Dear rek,
What double sided tape would you recommend. I went to Bunnings and the thinnest double sided tape (around 0.5mm) is still much thicker than the one under the bezel.
Cheers
x220 tablet, X61 tab, X61s, X60s, HP 2760p
Re: Bezel Separation in X61s
I got some transparent double sided tape from Officeworks a while ago when doing the other LCD display shenanigans. "3M Scotch Permanent Double Sided Tape", comes in the usual little plastic tape dispenser thing. My calipers say the tape is 0.08mm thick.
MacBook Pro Retina 13.3 2560x1600 | i5-4258U | 8GB | 256GB SSD | BT+abgnac
Surface Pro 3 12.0 2160x1440 | i5-4300U | 8GB | 256GB SSD | BT+abgnac
Surface Pro 3 12.0 2160x1440 | i5-4300U | 8GB | 256GB SSD | BT+abgnac
-
tabpclover
- Posts: 30
- Joined: Sat Apr 03, 2010 6:55 pm
- Location: NSW, Australia
Re: Bezel Separation in X61s
rek wrote:I got some transparent double sided tape from Officeworks a while ago when doing the other LCD display shenanigans. "3M Scotch Permanent Double Sided Tape", comes in the usual little plastic tape dispenser thing. My calipers say the tape is 0.08mm thick.
Wonderful
thanks
x220 tablet, X61 tab, X61s, X60s, HP 2760p
-
- Similar Topics
- Replies
- Views
- Last post
-
-
FS: misc parts.... lightly used classic keyboard | 4GB DDR3 RAM | lightly used T500 palmrest, bezel
by tpdude4 » Sat Dec 31, 2016 9:06 am » in Marketplace - Forum Members only - 6 Replies
- 692 Views
-
Last post by tpdude4
Sun Jan 15, 2017 6:45 am
-
-
-
T61 fingerprint reader palmrest- bezel swap
by cadillacmike68 » Thu Jan 12, 2017 9:52 am » in ThinkPad T6x Series - 4 Replies
- 1144 Views
-
Last post by ac12
Sun Jan 15, 2017 12:08 am
-
-
-
LF: A31 or A31p Screen Bezel/Assembly
by jeffbaichina » Sun Mar 12, 2017 3:03 am » in Marketplace - Forum Members only - 18 Replies
- 2007 Views
-
Last post by Saucey
Tue Mar 21, 2017 10:31 pm
-
-
-
Free: T400 keyboard bezel
by vinuneuro » Sun Apr 23, 2017 1:01 pm » in Marketplace - Forum Members only - 4 Replies
- 261 Views
-
Last post by vinuneuro
Mon Apr 24, 2017 11:05 pm
-
Who is online
Users browsing this forum: No registered users and 3 guests




