Thinkpads Forum

Hello

I bought this ram, but I am not 100% sure if it fits to X60. Any comment? Thanks


Picture of ram
http://img560.imageshack.us/img560/6792 ... 251985.png

TRANSCEND 2GB RAM DDR2 667 MHZ SO DIMM LAPTOP MEMORY

• RoHS compliant products.
• JEDEC standard 1.8V ± 0.1V Power supply
• VDDQ=1.8V ± 0.1V
• Max clock Freq: 333MHZ; 667Mb/s/Pin.
• Posted CAS
• Programmable CAS Latency: 3,4,5
• Programmable Additive Latency :0, 1,2,3 and 4
• Write Latency (WL) = Read Latency (RL)-1
• Burst Length: 4,8(Interleave/nibble sequential)
• Programmable sequential / Interleave Burst Mode
• Bi-directional Differential Data-Strobe (Single-ended data-strobe is an optional feature)
• Off-Chip Driver (OCD) Impedance Adjustment
• MRS cycle with address key programs.
• On Die Termination
• Serial presence detect with EEPROM

Admin edit: Removed double-spacing.

I don't see why it wouldn't work. X6X models are pretty forgiving when it comes to PC2-5300

DDR2 667 is the right one, it should work. I have a similar RAM in my X60 from Mushkin

1 stick right? i think its got a 3gb max chipset?

You are right with the 3GB chipset limit. Is the other RAM slot in use? If yes, one stick with 2GB should be enough for Win7/XP. If the other slot is free, you may add another 1GB Stick, you could add another 2GB too in case a pair of 2x 2GB RAM is cheaper than 2GB + 1GB (it sounds crazy but it happens. I also have 2x 2GB in my desktop albeit using a 32bits Win7)