Page 1 of 1
X60s Lid Replacement
Posted: Wed Feb 23, 2011 6:36 pm
by Brian10161
Hey guys, I just had a question regarding the lids on these computers.
I recently bought an X60s and it's pretty rough, so now I am slowly rebuilding it to get it back to a decent condition. The lid was really bad, I have since pledged it and it's coming back a little bit, but still a very tired finish. Anyway, I found a new lid but says it's for an X61, not X61T (but no mention of X60 series).
So I'm mainly wondering what part numbers will work with an X60s for lids. I'm having a hard time locating these really, plus people want like 45 dollars for them o_O
I already ordered a new palm-rest and bottom for this computer (The palmrest is for an X61s but I already confirmed it should work although it might block the IR port).
I have a brand new keyboard in it, new inverter and a new hard drive with a fresh install of Windows Vista Home Premium SP2. It runs quite nicely even with only 1gb of ram surprisingly enough.
I was also thinking of removing the WWAN card + cable because I have absolutely no use for it. Not sure what I'd need besides a cover for the antenna on the display.
Re: X60s Lid Replacement
Posted: Wed Feb 23, 2011 7:29 pm
by EOMtp
Any X6x[/s] top will fit any X6x[/s] base, i.e., any top from {X60, X60s, X61, X61s} will fit any base from {X60, X60s, X61, X61s}.
Good luck with your project!
Re: X60s Lid Replacement
Posted: Wed Feb 23, 2011 7:52 pm
by Brian10161
yay good to hear, I will order one of the lids when I get the palm-rest and base in. They're coming in from China, so I am a little wary.
Maybe I'll post pictures before and after I get the parts change.
Re: X60s Lid Replacement
Posted: Thu Feb 24, 2011 12:23 am
by ParatoOptimal
Who are you ordering the parts from?
I could use a new lid and keyboard for my X60s.
Thanks
Re: X60s Lid Replacement
Posted: Thu Feb 24, 2011 2:21 pm
by EOMtp
Brian10161 wrote:... I will order one of the lids ...
It is unclear what you mean by "
lid". Just to be clear:
It is the
entire "top" of the machine that is swappable for any other "top".
All the parts of the "top" assembly are specific to UltraLight vs. non-UltraLight screens, so either replace the entire "top" assembly ..or.. make certain you order the correct parts for your type of screen, i.e., UltraLight vs. non-UltraLight.
Re: X60s Lid Replacement
Posted: Thu Feb 24, 2011 4:15 pm
by Brian10161
I have the X60s with the WWAN thing. I'm unsure if it's the ultralight model or not.
I ordered my palm-rest and base from the seller "Thinkpad_2007". I haven't received the parts, so why not wait until I receive them and then make a decision. I will post pictures.
Here is the PN: 42X3921 CATCHER OR 42X4880 FOXCONN
I don't know if it will fit my X60s, want to make sure before I order it then.
Re: X60s Lid Replacement
Posted: Thu Feb 24, 2011 5:45 pm
by EOMtp
Brian10161 wrote:I have the X60s ... 42X3921 ... OR 42X4880 ... I don't know if it will fit my X60s
Neither of those will work for the X60s because the ThinkLight on the X61[/s] was repositioned, and thus the LCD cable and the LCD bezel are also different..
Below are the only part numbers which will work with your existing X60s:
For non-UltraLight LCD: FRU #41V9718
http://shop.ebay.com/i.html?_nkw=41V971 ... m270.l1313
For UltraLight LCD: FRU #41V9719
Re: X60s Lid Replacement
Posted: Thu Feb 24, 2011 6:44 pm
by Brian10161
Oh okay, good to know. I'm glad I didn't buy one hehe
It's too bad, it would have been cool to get a new lid for my X60. Hopefully something will pop up, maybe I can re-coat my current lid. It's not dented, just the rubber coating is extremely uneven and worn off.
Re: X60s Lid Replacement
Posted: Thu Feb 24, 2011 9:55 pm
by Cunha
I can't seem to find the specific FRU for the LCD LID for my X61s with ultralight. You found specific FRU's for the x60s but I can't tell the difference between one lid and the other on this page
http://www-307.ibm.com/pc/support/site. ... MIGR-62914 what does SWPG or TMD mean? I assume one of them is for the ultralight and one isn't..but it doesn't make it clear, and it is a CTO machine so that doesn't give any hints on that page.
Re: X60s Lid Replacement
Posted: Fri Feb 25, 2011 3:10 am
by EOMtp
Cunha wrote:... FRU for the LCD LID for my X61s with ultralight. ... what does SWPG or TMD mean?
Toshiba Mobile Display Co., Ltd. (TMD) is the manufacturer of the UltraLight screens. For the X61s with UltraLight screen, you need one of the
42Xnnnn FRU #s for TMD from the page your referenced.
Re: X60s Lid Replacement
Posted: Wed Mar 02, 2011 11:17 am
by Brian10161
Re: X60s Lid Replacement
Posted: Wed Mar 02, 2011 5:02 pm
by fasteez
About the x61 palmrest heat dissipation, what does it includes ? metal plate and/or fan ?
Re: X60s Lid Replacement
Posted: Wed Mar 02, 2011 5:22 pm
by Brian10161
It has the metal plate, but a piece of tape covering it. Not really sure of the purpose of it. The extra holes in the side are what I think is helping.
