X61t bubble forming under glass [Pic warning]

X60/X61 series specific matters only.
Post Reply
Message
Author
spaznrq
Freshman Member
Posts: 66
Joined: Mon Jul 17, 2006 11:35 am
Location: San Diego

X61t bubble forming under glass [Pic warning]

#1 Post by spaznrq » Sat Apr 02, 2011 7:06 pm

There is a bubble that formed and is growing over time under the glass on my tablet X61t near the edge of the screen/bezel. I didn't see how it started, but first noticed it when it was only around 3mm diameter. Now, it has grown elongated to about 2cm. Depressing the glass around the bubble does nothing to make it move. This X61t hasn't experienced a drop or impact of any sort recently. It's a mystery to me why it has appeared and is growing.

Has anyone else experienced this?

Image
X220 Windows 7 Pro, X60 - 1709-7HU Ubuntu 9.10 + Ultrabase X6, X61t - 7764-CTO Windows 7 32b Ultimate + Ultrabase X6, , 19" Sony - SDM-HS95/B, Logitech MX Revolution, Logitech Dinovo Cordless keyboard and mouse, IBM Model M (1390131)

sarbin
ThinkPadder
ThinkPadder
Posts: 1146
Joined: Sat Apr 17, 2004 11:56 pm
Location: Central VA

Re: X61t bubble forming under glass [Pic warning]

#2 Post by sarbin » Sat Apr 02, 2011 8:41 pm

Current: X1CT-G3 / Helix-G1 / X220 / T61p / T60p / X301 / X200T / Yoga 3 Pro
Support: T520 / T510 / T420 / T400 / R400 / T61 / Yoga 2 Pro / Yoga 13
Hall of Fame: A31p --- Retired: T43 / T30 / T22 / 600X / 380XD

spaznrq
Freshman Member
Posts: 66
Joined: Mon Jul 17, 2006 11:35 am
Location: San Diego

Re: X61t bubble forming under glass [Pic warning]

#3 Post by spaznrq » Sat Apr 02, 2011 8:46 pm

Thanks for the relevant link. It appears the resolution is to replace the LCD. Being that my X61t is 5 years old and out of warranty, my best option would be to save up and get the awesome new X220. I'll just hold out until the bubble makes the screen unusable.

Thanks!
X220 Windows 7 Pro, X60 - 1709-7HU Ubuntu 9.10 + Ultrabase X6, X61t - 7764-CTO Windows 7 32b Ultimate + Ultrabase X6, , 19" Sony - SDM-HS95/B, Logitech MX Revolution, Logitech Dinovo Cordless keyboard and mouse, IBM Model M (1390131)

RealBlackStuff
Admin
Admin
Posts: 17512
Joined: Mon Sep 18, 2006 5:17 am
Location: Mt. Cobb, PA USA
Contact:

Re: X61t bubble forming under glass [Pic warning]

#4 Post by RealBlackStuff » Sun Apr 03, 2011 7:43 am

You could open the LCD by removing the metal strip around it (just the right hand side might be enough).
Then get a set of "extra fine" beading needles in a Crafts shop.
Inserting the needle between the correct layers, and into that bubble, will create a conduct for the bubble (liquid?) to 'leak' out from between where it is.
That should do it.
Lovely day for a Guinness! (The Real Black Stuff)

Check out The Boardroom for Parts, Mods and Other Services.

sarbin
ThinkPadder
ThinkPadder
Posts: 1146
Joined: Sat Apr 17, 2004 11:56 pm
Location: Central VA

Re: X61t bubble forming under glass [Pic warning]

#5 Post by sarbin » Sun Apr 03, 2011 8:56 am

have you tried this?
i have an x61t that doesn't have any 'bubbles', yet. it may not develop them as it's not the sxga+ screen, but it would be good to know for the future.

thx
Last edited by sarbin on Sun Apr 03, 2011 2:15 pm, edited 1 time in total.
Current: X1CT-G3 / Helix-G1 / X220 / T61p / T60p / X301 / X200T / Yoga 3 Pro
Support: T520 / T510 / T420 / T400 / R400 / T61 / Yoga 2 Pro / Yoga 13
Hall of Fame: A31p --- Retired: T43 / T30 / T22 / 600X / 380XD

RealBlackStuff
Admin
Admin
Posts: 17512
Joined: Mon Sep 18, 2006 5:17 am
Location: Mt. Cobb, PA USA
Contact:

Re: X61t bubble forming under glass [Pic warning]

#6 Post by RealBlackStuff » Sun Apr 03, 2011 2:14 pm

It's the same theory as when you would put a protective foil on your phone's screen.
You need to make a 'tunnel' for the air, resp. liquid(?) of the bubble.
I use those needles to remove hair or dust from IDTech Flexview LCDs, if it is 2" or less from the side.
Lovely day for a Guinness! (The Real Black Stuff)

Check out The Boardroom for Parts, Mods and Other Services.

force
Sophomore Member
Posts: 128
Joined: Sat Jul 25, 2009 11:37 pm
Location: Chicago, IL

Re: X61t bubble forming under glass [Pic warning]

#7 Post by force » Fri Apr 15, 2011 4:41 pm

If the bubble goes all the way across the screen and it comes completely off, you might be able to resell the screen to an intrepid modder wanting to do the x60 screen swap. :)

avalancheccm
Posts: 2
Joined: Wed Nov 28, 2007 11:39 am
Location: Chicago, IL

Re: X61t bubble forming under glass [Pic warning]

#8 Post by avalancheccm » Sat Apr 16, 2011 9:55 am

Mine started out as a small bubble and now has expanded across the whole bottom of my screen. Fortunately, my screen is still under warranty. So, the bad news is I would expect it to expand over time. The good news is the computer is still perfectly usable (including the tablet pen), it just looks a little worse for the wear.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad X6x Series incl. X6x Tablet”

Who is online

Users browsing this forum: No registered users and 2 guests