X61 Tablet Backlight bleed in top corner....common problem?
Posted: Tue Jun 28, 2011 3:25 am
I have a X61 Tablet where the screen was just replaced by Lenovo. What was sent in for bezel issue, and a general checkup as the warranty was about to expire it became a near entire laptop rebuilt. Motherboard was replaced, entire LCD panel and inverters, and everything related to the LCD.
They first put in a Samsung pen only screen, and then updated it to the correct multi-touch.
There is a slight corner bleed in the top right corner. Its about 1/4 inch horizontal, and 3/4 inch down. Its slightly not uniform. I tried un-torquing the screw next to it, but that had no effect.
I have been dinking around with this laptop more than I have been using it, so I am wondering if this type of back-light bleed is common, and should be accepted, or if I need to send it back again. The panel color and brightness wise is perfect, so I am hesitant to send it back to have it go through the mill one more time.
They first put in a Samsung pen only screen, and then updated it to the correct multi-touch.
There is a slight corner bleed in the top right corner. Its about 1/4 inch horizontal, and 3/4 inch down. Its slightly not uniform. I tried un-torquing the screw next to it, but that had no effect.
I have been dinking around with this laptop more than I have been using it, so I am wondering if this type of back-light bleed is common, and should be accepted, or if I need to send it back again. The panel color and brightness wise is perfect, so I am hesitant to send it back to have it go through the mill one more time.
