Need Help To Run Mac OS X Lion on Edge E320
Posted: Fri Mar 16, 2012 2:52 am
Hi All Gurus,
I have a ThinkPad Edge E320 and want to run Mac OS X Lion on it. There is a lot of problem occurs after the installation.
ThinkPad Edge E320 Hardware Config:
Intel Core i3-2350M CPU
Intel HM65 Express Chipset
ThinkPad UltraNav Ponting Device
ThinkPad Display 1366 x 768
Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
Intel WiFi 1000 BGN
Intel HD Graphics 3000
Conexant 20671 SmartAudio HD
Intel Display Audio
Procedure:
Boot from USB drive (UniBeast + Lion installer)
It works well with the installer.
1. All 3 USB ports work
2. Intel HD Graphics 3000 works in full resolution
3. Build-in Keyboard and Trackpad, both Left and Right Trackpad buttons work
Lion (10.7.0) was installed smoothly.
After Lion Installation:
Boot from USB drive (UniBeast + Lion installer), select internal hard drive in the menu.
1. Only left hand side front USB port work, others don't.
2. Intel HD Graphics 3000 works in full resolution (1366x768)
3. Build-in Keyboard and Trackpad, both Left and Right Trackpad buttons work
4. Battery Status, Ethernet, WiFi, Bluetooth, Camera, SD Card Slot, External monitor VGA port and eSATA/USB combo port all don't work
5. Can't wake up from sleep
Install Multi Beast 4.2.1 (Lion Edition) with the following options:
- Easy Beast Install
- System Utilities > Reapir Permission
- Driver & Bootloaders > Kexts & Enablers > Miscellaneous > PS/2 Keyboard/Mice and Trackpads
- Customization > System Definitions > MacBook Pro 8,1
Reboot
Cannot boot from GUID Partition but can boot from Master Boot Record Partition
Boot from Master Boot Record Partition
1. Only left hand side front USB port work, others don't.
2. Intel HD Graphics 3000 works in full resolution (1366x768)
3. Build-in Keyboard and Trackpad work, but all Trackpad buttons don't work
4. External Keyboard and Mouse which connect the left hand side front USB port work
5. Battery Status, Ethernet, WiFi, Bluetooth, Camera, SD Card Slot, External monitor VGA port and eSATA/USB combo port all don't work
6. Can't wake up from sleep
Install Chimera 1.8.0 doesn't help, still like previous.
1. Only left hand side front USB port work, others don't.
2. Intel HD Graphics 3000 works in full resolution (1366x768)
3. Build-in Keyboard and Trackpad work, but all Trackpad buttons don't work
4. External Keyboard and Mouse which connect the left hand side front USB port work
5. Battery Status, Ethernet, WiFi, Bluetooth, Camera, SD Card Slot, External monitor VGA port and eSATA/USB combo port all don't work
6. Can't wake up from sleep
I'm a designer but not a programmer, but I would spend time to try anything you suggest. Wish you gurus would share experiences to make it completely work. Thanks.
Best
Isaac
I have a ThinkPad Edge E320 and want to run Mac OS X Lion on it. There is a lot of problem occurs after the installation.
ThinkPad Edge E320 Hardware Config:
Intel Core i3-2350M CPU
Intel HM65 Express Chipset
ThinkPad UltraNav Ponting Device
ThinkPad Display 1366 x 768
Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
Intel WiFi 1000 BGN
Intel HD Graphics 3000
Conexant 20671 SmartAudio HD
Intel Display Audio
Procedure:
Boot from USB drive (UniBeast + Lion installer)
It works well with the installer.
1. All 3 USB ports work
2. Intel HD Graphics 3000 works in full resolution
3. Build-in Keyboard and Trackpad, both Left and Right Trackpad buttons work
Lion (10.7.0) was installed smoothly.
After Lion Installation:
Boot from USB drive (UniBeast + Lion installer), select internal hard drive in the menu.
1. Only left hand side front USB port work, others don't.
2. Intel HD Graphics 3000 works in full resolution (1366x768)
3. Build-in Keyboard and Trackpad, both Left and Right Trackpad buttons work
4. Battery Status, Ethernet, WiFi, Bluetooth, Camera, SD Card Slot, External monitor VGA port and eSATA/USB combo port all don't work
5. Can't wake up from sleep
Install Multi Beast 4.2.1 (Lion Edition) with the following options:
- Easy Beast Install
- System Utilities > Reapir Permission
- Driver & Bootloaders > Kexts & Enablers > Miscellaneous > PS/2 Keyboard/Mice and Trackpads
- Customization > System Definitions > MacBook Pro 8,1
Reboot
Cannot boot from GUID Partition but can boot from Master Boot Record Partition
Boot from Master Boot Record Partition
1. Only left hand side front USB port work, others don't.
2. Intel HD Graphics 3000 works in full resolution (1366x768)
3. Build-in Keyboard and Trackpad work, but all Trackpad buttons don't work
4. External Keyboard and Mouse which connect the left hand side front USB port work
5. Battery Status, Ethernet, WiFi, Bluetooth, Camera, SD Card Slot, External monitor VGA port and eSATA/USB combo port all don't work
6. Can't wake up from sleep
Install Chimera 1.8.0 doesn't help, still like previous.
1. Only left hand side front USB port work, others don't.
2. Intel HD Graphics 3000 works in full resolution (1366x768)
3. Build-in Keyboard and Trackpad work, but all Trackpad buttons don't work
4. External Keyboard and Mouse which connect the left hand side front USB port work
5. Battery Status, Ethernet, WiFi, Bluetooth, Camera, SD Card Slot, External monitor VGA port and eSATA/USB combo port all don't work
6. Can't wake up from sleep
I'm a designer but not a programmer, but I would spend time to try anything you suggest. Wish you gurus would share experiences to make it completely work. Thanks.
Best
Isaac