Anyboby installed OS-X on T60P 8743 (1680X1050 resolution)?

Message

yangkuan81 · #1 Post by **yangkuan81** » Sat Jul 07, 2007 9:55 am

Hi, all,

According to other posts, I think I am fine with all my hardware except this screen resolution (I have thinkpad wireless card). Is there anyone out there who already got 1680X1050?

regards

SuneR · #2 Post by **SuneR** » Fri Nov 30, 2007 7:53 am

I am also very interested in hearing about how to get 1680x1050 resolution to work on my TP60p.

andrey · #3 Post by **andrey** » Sat Dec 01, 2007 3:55 pm

have you tried hard-coding the resolution?

ricerocket · #4 Post by **ricerocket** » Mon Dec 03, 2007 3:08 pm

If you run the standard VESA drivers and forego QE/CI, you can just hardcode the resolution into the com.apple.boot.plist file.

finetuned · #5 Post by **finetuned** » Wed Dec 05, 2007 7:03 pm

I have 1680x1050 working on my T60p, QE and CI is working as well.

Yes, you can hardcode your resolution into com.apple.boot.plist, but at first it will not be supported.

Under Leopard, I'm using the following kexts to make this work:
http://rapidshare.com/files/74577871/AT ... s.zip.html

I assume you know how to install these - don't forget to chown and chmod.

For the record:
these are for the ATI FireGL V5250 graphics card which came standard in my T60p. The device-id for this device is 0x71d4 (vendor ID is 0x1002).

ricerocket · #6 Post by **ricerocket** » Thu Dec 06, 2007 2:23 am

Are those kexts specific to Leopard? I'm using the Callisto kexts designed for Tiger for my x300 in my T43, but Callisto has since discontinued development.

finetuned · #7 Post by **finetuned** » Thu Dec 06, 2007 3:00 am

I don't think they are specific to Leopard, but I thought I'd just mention it.

I think you can just try them under Tiger.

Just make sure you make notes of what files you should delete from the command line if you get a kernel panic.

andrey · #8 Post by **andrey** » Sun Dec 09, 2007 5:02 am

finetuned wrote:I have 1680x1050 working on my T60p, QE and CI is working as well.

Yes, you can hardcode your resolution into com.apple.boot.plist, but at first it will not be supported.

Under Leopard, I'm using the following kexts to make this work:
http://rapidshare.com/files/74577871/AT ... s.zip.html

I assume you know how to install these - don't forget to chown and chmod.

For the record:
these are for the ATI FireGL V5250 graphics card which came standard in my T60p. The device-id for this device is 0x71d4 (vendor ID is 0x1002).

Thank you, thank you! These work perfectly with FireGL5250!

andrey · #9 Post by **andrey** » Sun Dec 09, 2007 5:59 am

spoke too soon... they work with 10.5 but not with 10.5.1

thatcrazycommie · #10 Post by **thatcrazycommie** » Sun Dec 09, 2007 3:01 pm

finetuned wrote:I assume you know how to install these - don't forget to chown and chmod.

I actually don't know how to install those - I assume it's more complicated than just copying them to the folder with the other ATI kexts, because I don't know what chown and chmod mean (and also because I tried that and it didn't work). Can anyone help me out?

andrey · #11 Post by **andrey** » Sun Dec 09, 2007 3:04 pm

thatcrazycommie wrote:
finetuned wrote:I assume you know how to install these - don't forget to chown and chmod.
I actually don't know how to install those - I assume it's more complicated than just copying them to the folder with the other ATI kexts, because I don't know what chown and chmod mean (and also because I tried that and it didn't work). Can anyone help me out?

Once you copy files to the Extensions folder, run the following

sudo chown -R root:wheel /System/Library/Extensions
sudo chmod -R 755 /System/Library/Extensions
sudo rm /System/Library/Extensions.mkext
sudo rm /System/Library/Extensions.kextcache

thatcrazycommie · #12 Post by **thatcrazycommie** » Sun Dec 09, 2007 5:05 pm

Hm. I tried that, and when I rebooted, I got the gray apple loading screen (in the correct resolution!), but then the screen blinked and went black. Perhaps those kexts don't work with 10.4.8? Maybe there is an easy way to modify them so that they do?

andrey · #13 Post by **andrey** » Sun Dec 09, 2007 8:15 pm

it's strange, while I can get to 1680 x 1050 resolution, I cannot get my laptop working at 1400 x 1050. Hardcoding the resolution doesn't seem to make a difference.

Does anybody have any suggestions how to force 1400x1050x32?

andrey · #14 Post by **andrey** » Mon Dec 10, 2007 4:06 am

andrey wrote:it's strange, while I can get to 1680 x 1050 resolution, I cannot get my laptop working at 1400 x 1050. Hardcoding the resolution doesn't seem to make a difference.

Does anybody have any suggestions how to force 1400x1050x32?

Well, after some reading your posts on insanelymac I ended up adding my monitor EDID to the ATIinject file and now both QE and CE work wonderfully on my FireGL 5250 @ 1400x1050.

Thank you so much, you're the man!

thatcrazycommie · #15 Post by **thatcrazycommie** » Mon Dec 10, 2007 4:28 am

Don't suppose you've got any ideas as to why those kexts don't seem to quite work with 10.4.8?

Alexander Heß · #16 Post by **Alexander Heß** » Mon Feb 25, 2008 10:34 am

andrey wrote:… I ended up adding my monitor EDID to the ATIinject file …

Could you please share that file?

andrey · #17 Post by **andrey** » Mon Feb 25, 2008 11:08 am

Alexander Heß wrote:
andrey wrote:… I ended up adding my monitor EDID to the ATIinject file …
Could you please share that file?

Attached... Note that it will work only with FireGL 5250 running 1400x1050. Simply replace the attached kext files and you should be good.

http://members.cox.net/andreys/ATI5250.zip

-- Andrey

Zaiden · #18 Post by **Zaiden** » Wed Feb 27, 2008 12:33 pm

Do you know how to get the VGA Out to work? (I already have CI/QE and 1680x1050 res working on Leopard 10.5.2)

minhi · #19 Post by **minhi** » Thu Feb 28, 2008 11:16 am

Zaiden wrote:Do you know how to get the VGA Out to work? (I already have CI/QE and 1680x1050 res working on Leopard 10.5.2)

Zaiden, which graphics card are you using?

Zaiden · #20 Post by **Zaiden** » Thu Feb 28, 2008 11:17 am

FireGL V5250

milstein · #21 Post by **milstein** » Thu Feb 28, 2008 10:08 pm

I want to know how to get VGA out and dual monitor to work too
I have an ATI Radeon Mobility X1300

At0mAng · #22 Post by **At0mAng** » Sun Mar 02, 2008 1:13 pm

1680X1050 with stock Intel Card on my T60 is running fine. Did not have to hard code or do anything for it to work...

dcipher · #23 Post by **dcipher** » Sat Sep 13, 2008 1:25 pm

Add me to the list that would like to find out how to get dual monitor to work - especially through my docking station. The T60p runs OS X so nicely, but I'm so used to running with 2 monitors under XP that it's hard to go back to just the LCD (I use vmware and run VM's on the 2nd monitor).

If I boot with my laptop docked, it starts up on the external monitor, but then switches back to my LCD and the external monitor is not seen inside of leopard.

Anyboby installed OS-X on T60P 8743 (1680X1050 resolution)?

Anyboby installed OS-X on T60P 8743 (1680X1050 resolution)?

Who is online