Thinkpads Forum

Just curious whether anyone had success installing 10.5.2 on newer Thinkpads (T60/T61, etc..)? I seem to get the kernel panic during an installation on my T60p and unable to proceed any further. So any luck with this newest update?

-- Andrey

i got it to run on my t61. 10.5.2 with netkas tutorial ...

only problem now is, that mouse and keyboard are not working.
usb works...
i ll work now on the graphis for my Nvidia q 140M...

As you, I upgraded to 10.5.2 following netkas instructions, and I was left without keyboard (usb mouse, instead, worked fine).

I found a solution to the problem of the keyboard, in post #7 of this thread:

http://forum.insanelymac.com/index.php?showtopic=87136

Just grab ACPIPS2Nub.kext here

http://forum.insanelymac.com/index.php? ... t&id=22027

unzip it, put it in the Extensions folder (they say to replace it, but I did not have it after installation), as usual repair permissions and reboot.

Voilà: my keybord worked again.

I am on a mbr efi v.8 system, originally installed with the 10.5.0 flat image and then updated to 10.5.1 via Apple software update. I did not install any fancy kext (for battery meter, sound, and the like), so I did not have to restore any kext after the upgrade.

As far as I can see, whatever worked with 10.5.1 is working with 10.5.2 too. I haven't yet updated the graphics drivers.

Regards
Neb

i'm using Kalyway and you can't run the system update from apple. you need to download a massaged 10.5.2 combo update file, you can find it at the normal places.

i upgraded to 10.5.2 and ran the leopard graphics update (from apple) fine.

Everything is working expet the sound
X61 dual boot VIsta Ultimate 64 + OSX LEO 10.5.2
As soon As I get Sound working I will get ride of vista
and go with xp or saty just with LEO
--> follow this tutorial
http://forum.insanelymac.com/index.php? ... 27440&st=0&

I'm using a bluetooth headset to have sound and a microphone.

were you able to have the SD and PCMCIA card working ?
I have a X61 and I installed LEopard 10.5.2

Thank you for your help

Kalway kernel update here is running fine. All hardware works on my T60 6371-CTO.

el31415 wrote:Everything is working expet the sound
X61 dual boot VIsta Ultimate 64 + OSX LEO 10.5.2
As soon As I get Sound working I will get ride of vista
and go with xp or saty just with LEO
--> follow this tutorial
http://forum.insanelymac.com/index.php? ... 27440&st=0&

Did you try this for sound?

AzaliaAudio.pkg

If so and still no sound try this...I found it on some other webiste and forget where to give proper credit...

1. Open /System/Library/Extensions/AppleAzaliaAudio.kext/Contents/Info.plist
2. Find "<key>IOHDAudioCodecVendorID</key>"
3. In the next line where IOHDAudioCodecVendorID was found , replace "0x????????" with "0x11d41981"(You may check if your AD1981HD use this devid at Device Manager in Windows).
You can just add the device ID without deleting any others id.

Finally,in terminal:
sudo -s
cd /System/Library/Extensions
chown -R root:wheel AppleAzaliaAudio.kext
find AppleAzaliaAudio.kext -type d -exec /bin/chmod 0755 {} \;
find AppleAzaliaAudio.kext -type f -exec /bin/chmod 0644 {} \;
cd /System/Library
rm -rf Extensions.mkext Extensions.kextcache
shutdown -r now

Thanks for all replies, I'm now on 10.5.2 with sound and everything working perfectly.

One question though, has anyone tried installing new "Leopard Graphics Update 1.0"? After my adventure with 10.5.2 I'm not feeling too comfortable getting updated directly from Apple now... I saw some people mentioned that Graphics Update work, but on ATI cards graphis become choppy and unresponsive. Any thoughts or experience on that?

I'll suggest you download the Kalyway batched 10.5.2 update package from some of the source, and then you'll be find updating the graphics from Apple Update directly

milstein wrote:I'll suggest you download the Kalyway batched 10.5.2 update package from some of the source, and then you'll be find updating the graphics from Apple Update directly

Right, but are you able to use QE with the latest graphics update?

Just wanted to add that I've successfully updated my Thinkpad T43p to Leopard 10.5.2.

I used Kalyway's ComboUpdate. Everything ran well after first reboot, keyboard and track pad working plus sound. The only thing I had to fix was the wireless.

In addition, rather than using Kalyway's kernel update I used Netkas' Universal 9.2 kernel. Then I updated System.kext with the vanilla version from the original 10.5.2 update. Now everything worked as before.

If you use Kalyway update make sure you get the combo file and the kernel file. The combo file updates everything besides the kernel. Sear for torrent using "kernel" as the keyword...

Not sure if people were aware that there was 2 Kalyway updates...