Thinkpads Forum

Sleep work !!
Speedstep work Kernel 9.4
Wifi work : part number card 40Y7026
Biométric work
Sata work
Select baie and second hard drive work in sata mode !
Docking station : work !

Files pack for this laptop (t60p 2007-WMJ
http://dl.free.fr/upG5fUCRf5

Step by step in youtube.
http://fr.youtube.com/watch?v=zZGfeYV9iL8



Spécial tanks to : bozilla
http://forum.thinkpads.com/viewtopic.ph ... 30&start=0

Préférence international (Clavier français)

Problème de sauvegarde préférences international, le clavier revient sans cesse en Français "normal".
Le problème viendrait appartement du nom de fichier utiliser ne correspondant pas au nom "Layout" dans le fichier lui même.
Pour verrouiller le tout, j'ai donc changer le nom du clavier en "Français-t60p-v2", et fait cette modification dans le nouveau "Layout".
Vous pouvez télécharger se fichier ici : http://dl.free.fr/jbZTV7D9e
Il suffit de le déplacer dans /Library/Keyboard Layouts, modifiez vos préférences en conséquences ...

J'attends vos commentaires à se sujet, car depuis le début le clavier changeait mais de façon aléatoire...

Installation finale et .kext

Autre sujet, dernièrement, j'ai fait une ré-install et par deux fois gros KO inexplicable (kernel panic).
A la troisièmement tentative, j'ai installer les .kext en deux fois, d'abord les fichier ATI* (puis reboot), et en suite tous les autres...
J'ai vu dans les logs des trucs super étrange en rapport avec le contrôleur SATA/ATA un peu comme si au tout début de l'install, l'écriture sur le disque dur n'était pas très fiable... A surveiller donc...


Température processeur:

Au tout début, il n'était pas rare de voir le CPU passer rapidement vers 70° voire 75° en utilisation intensive...
J'ai ouvert le clavier et vérifier le ventilateur il était plein de poussière, j'ai enlever la poussière et aussi merveilleux que cela puisse paraitre la température est descendu de 10° directement. si bien qu"il n'est pas rare de le voir passer en dessous de 40° en fonctionnement normal.

Si vous ne savez pas comment enlever la poussière du ventilateur (l'aspiration de la grille ne suffit pas), je fais un howto sur Youtube

Great stuff, very good video. Although I would very much appreciate if you would listed options you checked during install. Also, do you plan to upgrade to 10.5.6? If yes, a nice tutorial would be also appreciated.

Thank you for your message.
On a 10.5.6 update, I urge you the latest IPC 10.5.6, which is simply fabulous.
I buy CoolBook that works quite beautifully with the T60p
The big problem with changing keyboard intenpestif have disappeared.
The problems of small parameters of energy savings have disappeared.
If you wish, I can also get a video for the IPC 10.5.6

Best regards

Tried all of your kexts yesterday (except for video, which I've edited myself, only used your ATIInject) with iPC 10.5.6 and had mixed results.

SpeedStep worked alright, although cooler was very loud all the way, even though CPU was onlyaround 40 degrees hot. Sleep worked only half-way - it went to sleep mode alright, but never woke up properly, rebooting the laptop and then saying "Wake Kernel!" during boot.

But the biggest problem I'm concerned with is that I have only single CPU Core working. I have to boot with "cpus=1" param, otherwise it doesn't boot. Anyone knows any suggestions there?

upgarde wrote:If you wish, I can also get a video for the IPC 10.5.6

Maybe just list Customization options you checked during installation here and upload a new set of kexts for 10.5.6. That would be awesome!

Silencer wrote:Tried all of your kexts yesterday (except for video, which I've edited myself, only used your ATIInject) with iPC 10.5.6 and had mixed results.

SpeedStep worked alright, although cooler was very loud all the way, even though CPU was onlyaround 40 degrees hot. Sleep worked only half-way - it went to sleep mode alright, but never woke up properly, rebooting the laptop and then saying "Wake Kernel!" during boot.

But the biggest problem I'm concerned with is that I have only single CPU Core working. I have to boot with "cpus=1" param, otherwise it doesn't boot. Anyone knows any suggestions there?

I do not remember much of what I do on the kexts for the passage in IPC 10.5.6.
But it works quite well.
- Double core functional
- Sleep.
- Wifi
- SpeedSpep with CoolBox 2.13! its a must !
- Video QE / CE OK

upgarde wrote: I do not remember much of what I do on the kexts for the passage in IPC 10.5.6.
But it works quite well.
- Double core functional
- Sleep.
- Wifi
- SpeedSpep with CoolBox 2.13! its a must !
- Video QE / CE OK

Can you maybe send me your kexts? And I'm really interested in how did you manage to utilize both cores.

Voici le liens contenant ce qu'il faut pour l'installation de l'IPC 10.5.6 on Thinkpad t60p 2007WMJ
B.R.

Here is the link containing what it takes to install the IPC 10.5.6 on Thinkpad T60p 2007WMJ
B.R.
http://dl.free.fr/tKGyHlF0P

upgarde wrote: Here is the link containing what it takes to install the IPC 10.5.6 on Thinkpad T60p 2007WMJ
B.R.
http://dl.free.fr/tKGyHlF0P

Thanks! I will try it and let everyone know on the results.

Silencer wrote: Thanks! I will try it and let everyone know on the results.

I get "Unexpected end of the archive" when I try to extract files. Looks like it's not uploaded properly, can you please have a look?

silencer this files are easy to open in OS X using Stuffit12 I believe free to download
maybe you allready have

teladoy wrote:silencer this files are easy to open in OS X using Stuffit12 I believe free to download
maybe you allready have

Thanks again, everything is working fine now.

Great I am reading you every were,I am waiting for the download to finish and the card to arrive then I may bother you if it is OK I have IDenue allready iPC was hard but i notice that is trhe one you prefer

teladoy wrote:Great I am reading you every were,I am waiting for the download to finish and the card to arrive then I may bother you if it is OK I have IDenue allready iPC was hard but i notice that is trhe one you prefer

Well, sure. But if you've ordered the right Atheros Wi-Fi card using IBM part number then you should be alright.

I am hoping for the best this time Thank you
I hope upgarde is fallowing this tread because my card is the same as his ["Wifi work : part number card 40Y7026"] another tread in this forum says [" Actually the 40Y7026 FRU ends up being the Atheros AR5BXB6 Mini-PCI Express card."] with a picture and all same card .
Now I see he recommend you iPC which I am hoping too but I wonder what he does when it comes to install wireless on that list in pcwiz were the advertize only one Atheros card.
Wonder

i have the same specs and iPC 10.5.6 failed to install onto my T60p 1600x1200
i came to the apple bootscreen and it suddenly rebooted, any one can tell me what is the problem?

giobien wrote:i have the same specs and iPC 10.5.6 failed to install onto my T60p 1600x1200
i came to the apple bootscreen and it suddenly rebooted, any one can tell me what is the problem?

Try booting with "cpus=1" in the boot prompt.

if you install the proper kernel, cpus = 1 is not required, however, vmware malfunction with cpus = 1 ...
Myself, I have my two cores but you must install the proper kernel.

upgarde wrote:if you install the proper kernel, cpus = 1 is not required, however, vmware malfunction with cpus = 1 ...
Myself, I have my two cores but you must install the proper kernel.

You can use vanilla kernel and both cores if you enable Memory Protection in BIOS. I had the same problem, but now I have both cores and vanilla kernel.

is the wifi card, FRU 40Y7026 the only suggested card to replace the intel? i'm about to make the purchase

If the card 40Y7026 not working I could not answer you now so yes for it! you will not regret!

ziggie216 wrote:is the wifi card, FRU 40Y7026 the only suggested card to replace the intel? i'm about to make the purchase

42T0825 worked like a charm for me. I only have two antennas, but can forget about middle one. Worked with latest iPC and iDeneb without any effort.

wow, iATKOS 5.5 upgraded to 5.6 works a lot better than Kalyway for the T60p. So I'm almost done other than a few problems.
1) Screen randomly doesnt show up correctly during boot up. Ether I can see the login screen or I see nothing but a blue background
2) Unable to project to external monitor (CI & CE is working fine)
3) Left side of the screen goes dark gray when I'm on power.

Most of the small problems are easy to solve.
1: I do not fit on the screen blue or black to boot
2: For the dual screen must be enabled Display / LCD + VGA in the bios.
3: you must: High light at boot in the BIOS.

1)So this is what I get most of the time


It take about.. 5 power off and on, and a lot of wishing, to see the proper login screen. Issue with the ATIinject?

2) the only way to attach the external monitor is to have it look up to the laptop before the bootup? I had the LCD + VGA set in the bios, but attaching the monitor when I'm already logged into osx wont display anything on the second screen.

3)

1 : Ohh, sorry, I misunderstood. (i am french frog man)
This is the typical problem for plants with a bad versions of drivers on OSX.
You can try to recover ATIInject + Atindrv + ATIRadeonX1000 here: http://dl.free.fr/upG5fUCRf5
But if you're on 10.5.6, you have probably the same files in pack : http://dl.free.fr/tKGyHlF0P
The IATKOS (all versions) does not have a very good reputation, I urge you IPC 10.5.6

2: Normally the screen resolution is automatically recognized is in mirror mode but it means of course the good drivers.

I have been using that 10.5.6 video drivers, but I guess I can try out the IPC 10.5.6 as well.



IPC was a failure for me. Install went smoothly, but couldnt even get the display to work with your driver.
btw does your mic port work?

No, the microphone does not work.

1 : for games in full screen, it is necessary to modify the Info.plist file at
/System/Library/Extensions/ATIRadeonX1000GA.plugin/Contents/
change the string: <key>1002514c-0000-0000-0000-000a27898d3e</key>
by <key>100271C4-0000-0000-0000-000a27898d3e<key>
Beware, there are two occurrences.

Warning, the resolution 1024x768 is not working, but 1280x960 yes!
If you have a black screen after a resolution change, simply down arrow to return to the previous resolution

2 : default rule IPC 10.5.6 suspend mode 3 (slow) for the switch to 0 (fast), you can use the application melatoni.app ...