Thinkpads Forum

shooteagle wrote:To confirm in step 3. After installing SL on the "HDD Snow", put the "HDD Snow" in the laptop and then reboot the laptop, right?

shooteagle wrote:In step 3, do you copy both /extra and /MacPNT in the root directory of the "HDD Snow"?

shooteagle wrote:In step 4, if the retail disk is 10.6.3, do I need update? is this a necessary step?

shooteagle wrote:I'm a Mac newbie, in step 5, when you say copy "rc.sleep" and " in rc.wakeup" /etc/, how?

crashnburn wrote: I have an X61T waiting for this Treatment. Care to share your successful DSDT / Kext etc with the instructions.

ernstloeffel wrote:
I'm sorry for the delay. I haven't forgotten, but I sent my x60t in for a final "update" before warranty is over (hinges were loose and the fan was rattling). I hope it will be back at the end of the week.

crashnburn wrote: I have an X61T waiting for this Treatment. Care to share your successful DSDT / Kext etc with the instructions.

                            "device-id", 
                            Buffer (0x04)
                            {
                                0xC2, 0x29, 0x00, 0x00
                            }, 

                            "vendor-id", 
                            Buffer (0x04)
                            {
                                0x86, 0x80, 0x00, 0x00
                            }

                                    "model", 
                                    Buffer (0x0D)
                                    {
                                        "X3100"
                                    }, 

shooteagle wrote:i created the usb according your direction. then i booted with the usb, it hang there. it never got to the utilities. my hhd is external with 2 partitions, partition one has windows 7 installed and partition 2 is blank (RAW). does the hhd need to total blank and unformatted?

1) USB Key
- On "MacOSX"
- Format the "USB Key" (HTFS+) and the "HDD Snow" (HTFS+)
- Restore Snow Leopard 10.6 Retail DVD on the "USB Key" (with disk utility)
- Copy /MacPNT folder on "USB Key"
- Install "Chameleon RC4-AsereBLN-1.1.9" ON THIS "USB KEY" (be careful this could damage your own hardware)
- Copy (or replace) /Extra folder from the package to the "USB Key" root folder
- If you need a MBR partition table :
- Launch "ShowAllFiles" and select "Show"
- Replace:
OSInstall.mpkg in /Volumes/"USB Key"/System/Installation/Packages
OSInstall in /Volumes/"USB Key"/System/Library/PrivateFrameworks/Install.framework/Frameworks/OSInstall.framework/Versions/A/
- Launch once again "ShowAllFiles" and select "Hide"
- Launch "pfix" and select your "USB Key"

shooteagle wrote:when you boot, i change the boot in bios to USB, right?

shooteagle wrote:but isn't the snow hdd also connect by usb?

shooteagle wrote:I did not do the MBR, is that necessary?

shooteagle wrote:If so, how do i replace it. can I do a drag and drop?

nuskoolkiddie wrote:sorry for that taking so long: here is my pcmcia kext http://www.sendspace.com/file/64k02u , its from 10.4 or something, i don't remember anymore, you have to put it in /System/Library/Extensions/

nuskoolkiddie wrote:another question, how do i get my microphone working?

Here is my VoodooHDA sound driver for T60 ( 2008 - CTO ) running 10.6.0 snow leopard , with working internal microphone:
http://rapidshare.com/files/376340966/V ... A.kext.zip

I got it here: http://www.projectosx.com/forum/index.php?showtopic=355 (Download here: http://www.projectosx.com/forum/index.php?showtopic=483 - russian ) with node patches (NodesToPatch) info.plist section from here: http://www.projectosx.com/forum/index.p ... #entry2283

nuskoolkiddie wrote:a and btw for everyone that uses this guide, if you want to connect multiple displays, you will be very happy with this tool: http://www.fabiancanas.com/Projects/MirrorDisplays/ . i use to start it from spotlight when my screen gets corrupted.

shooteagle wrote:And i see the two files, OS Install.mpkg and OSInstall, in the two different directories.
can you please clarify which file goes where and which file need to be delete if so.

1) USB Key
- ...
- If you need a MBR partition table :

• - Launch "ShowAllFiles" and select "Show"

• - Replace:
  
  • ...
  
  
  • OSInstall.mpkg in /Volumes/"USB Key"/System/Installation/Packages
  
  
  • ...
  
  
  • OSInstall in /Volumes/"USB Key"/System/Library/PrivateFrameworks/Install.framework/Frameworks/OSInstall.framework/Versions/A/
  
  
  • ...

• - Launch once again "ShowAllFiles" and select "Hide"

- Launch "pfix" and select your "USB Key"

shooteagle wrote:thanks. i did. the x60s booted and the white screen with apple logo appears. ~ 20 seconds, the installation screen appear but with a picture of seeming like a mac desktop tower and a zooming picture of a slidering button with an arrow pointing up.

shooteagle wrote:On usb key, i have originally 3 folders, OS-X Install, Option Install and another directory which i can't remember. Then i add two more folder which is the MacPNT folder and the /Extra folder.

shooteagle wrote:the image I'm using is 10.6.3. do you think that is the problem?

shooteagle wrote:It hangs on that screen, also i notice i can't move my mouse. any ideas?

Sebinouse wrote:1) USB Key
- On "MacOSX"
- ...
- Launch "pfix" and select your "USB Key"

shooteagle wrote:i have 10.6.3 installed on x60s, card reader and wireless are two of the items not working. initially had the intel wireless, bought atheros and installed. can anyone help on how to get it working.. thanks.

as detail instruciton as possible as i'm i newbie on this.