OSX86 and Lenovo N100 3000 with Soundmax Onboard Audio

[icehawk]

Has anyone got this lot working together?
I have tried just about everything.
Please post if you have Audio and let me know how you did it!
Thanks.

[guyin916]

Has anyone got this lot working together?
I have tried just about everything.
Please post if you have Audio and let me know how you did it!
Thanks.

icehawk, welcome to the forums. i just want to let you know i will try to get back to you on your osx86 audio unless you have found a solution. if you have found a solution, then please share with the forum. one thing that can help me speed up a solution for you is to tell me what kind of audio you use and what iso of osx you are using.

-pat

[icehawk]

Hi Guy,
Thanks so much for replying to my post!
I have not found the solution to my quandary yet.
I have a Lenovo 3000 N100.
I am using The JaS 10.4.7 DVD, however, I have several other install disks available to me.

My Onboard Audio is :
Sound Device: Soundmax Intergrated Digital HD Audio
device & vendor id = 0x11D41986
System Device: Microsoft UAA Bus Driver for High Definition Audio
device & vendor id= 0x27D88086

I have tried many "solutions" found on the net and am now quiet experienced in kext modification , terminal syntax and so forth. I, as a result, am able to see what appears to be the loaded Azalia Extention in audio and midi setup , working volume controls etc but have no sound output.

I would be more than grateful if you can help me with this!

[guyin916]

Hi Guy,
Thanks so much for replying to my post!
I have not found the solution to my quandary yet.
I have a Lenovo 3000 N100.
I am using The JaS 10.4.7 DVD, however, I have several other install disks available to me.

My Onboard Audio is :
Sound Device: Soundmax Intergrated Digital HD Audio
device & vendor id = 0x11D41986
System Device: Microsoft UAA Bus Driver for High Definition Audio
device & vendor id= 0x27D88086

I have tried many "solutions" found on the net and am now quiet experienced in kext modification , terminal syntax and so forth. I, as a result, am able to see what appears to be the loaded Azalia Extention in audio and midi setup , working volume controls etc but have no sound output.

I would be more than grateful if you can help me with this!

no internal speaker sound at least from what i gather from insanelymac... have you tried plugging your laptop line outs or headphones out to a sound receiver?

[icehawk]

have you tried plugging your laptop line outs or headphones out to a sound receiver?

Hi,
Yes I have tried that. It would be my preferred way to get sound out. I also have an Echo Indigo PCMCIA sound device but I gather that there is no chance of that working at present.
Apart from the lack of onboard sound I have a fully funtional "Mac".
I am able to use a cheap USB Sound device " http://www.maplin.co.uk/Module.aspx?Tab ... &doy=23m10 " with no problems.
However, It lessens the portability of the Laptop.

[icehawk]

Update to this issue that WORKS!!! Well, partially.

http://forum.insanelymac.com/index.php? ... opic=32859