x220 i7 not reaching 3.3ghz

X200, X201, X220 (including equivalent tablet models) and X300, X301 series specific matters only.
Post Reply
Message
Author
rty1138
Posts: 14
Joined: Sat Nov 26, 2011 12:11 am
Location: fremont, ca

x220 i7 not reaching 3.3ghz

#1 Post by rty1138 » Thu Dec 15, 2011 1:28 am

on my x220 i7 2620M it should be going up to 3.3ghz on maximum turbo, but it only goes to 3.2 with a 32x multiplier. i know there are some bios settings that have to do with power. does anyone know the exact settings to make it hit 3.3ghz either in the power manager software or bios?

Q-Ball
Sophomore Member
Posts: 234
Joined: Tue Mar 15, 2011 5:00 pm

Re: x220 i7 not reaching 3.3ghz

#2 Post by Q-Ball » Thu Dec 15, 2011 8:26 pm

So you've updated the BIOS?
If you haven't, you should do probably do that. It may fix that issue.

Some reviews I've read state that 3.2GHz is the maximum turbo anyways.
I'm not sure why, though, considering the maximum for that chip is 3.4GHz.
W520 (i7-2720M, Quadro 1000M), T41, 600E
Just say no to the ThinkBook Pro.

jdrou
Senior Member
Senior Member
Posts: 584
Joined: Tue Feb 10, 2009 6:15 pm
Location: Madison Heights, MI

Re: x220 i7 not reaching 3.3ghz

#3 Post by jdrou » Mon Dec 19, 2011 2:16 am

The 3.4 would only be seen if only a single core was active I believe (or at least the other core had very low utilization) so it might require some unusual config to see it in practice.
Current Thinkpads:
X31, X40, X61T, X61, X201, X220 (i7 IPS), W520 (2720QM/2000M/FHD), T440p (i7-4800MQ/GF730GT/FHD)
Dells: Latitude C840, Precision M70, Precision M4400, M6400 (WUXGA), M6600, M6700
Daily driver: Dell XPS 13 w/Kaby Lake+Iris Pro+TB3

Stevo
Posts: 45
Joined: Mon Jul 04, 2011 9:51 am
Location: Winchester and Petersfield, Hampshire, UK
Contact:

Re: x220 i7 not reaching 3.3ghz

#4 Post by Stevo » Thu Jan 19, 2012 7:38 am

I think you're getting the max.

S
Stephen

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad X200/201/220 and X300/301 Series”

Who is online

Users browsing this forum: No registered users and 9 guests