Page 1 of 1
PC-12600 only running at 800MHz on X201 tablet
Posted: Tue Apr 17, 2012 2:50 pm
by MVS87
Hi
Just upgraded my ram from the standard 2GB PC-10666 that came with my pad to 2x4GB PC-12600. Everything is working just fine, but according to cpu-z they are only running at 800MHz... Can i get higher speeds from them?
Best regards, Morten
Re: PC-12600 only running at 800MHz on X201 tablet
Posted: Tue Apr 17, 2012 8:11 pm
by erik
welcome to the forum!
depending on your processor (which i suspect is ULV) 800MHz is the highest memory clock your particular model can handle. standard processors in the X201 series maxed out at 1066MHz memory.
search for your CPU on
ark.intel.com and it will tell you the maximum memory clock.
Re: PC-12600 only running at 800MHz on X201 tablet
Posted: Fri Apr 20, 2012 1:27 pm
by MVS87
Thank you
Okay, so no speed bumb-up. Didn't think anything were running at 800MHz these days, but of course although I just got the tablet recently, the model is some years old already...
Anyway to get better timings?
Regards
Morten
Re: PC-12600 only running at 800MHz on X201 tablet
Posted: Fri Apr 20, 2012 2:43 pm
by erik
there's no easy or cost-effective way to increase memory speed in that system. the best processor in the X201/X201T tops out at a 1066Mhz memory clock. there's no significant difference between 800MHz and 1066Mhz unless you're literally running a full day worth of mathematical calculations and want to save 30 minutes off of your calculation times.
memory speed is about the least important spec for the majority of users. if "speed" is what you want then you need an SSD. honestly, you'll never notice a change in memory in your particular system so i wouldn't worry about it.
Re: PC-12600 only running at 800MHz on X201 tablet
Posted: Sat Apr 21, 2012 11:49 am
by MVS87
Thank you for your help
