x220 status indicator fell off. *PIC*

Message

crazeazn · #1 Post by **crazeazn** » Fri Feb 06, 2015 4:27 pm

Anyone know where I can buy one of these?

The sticker cover which tells you standby/battery/ac/low battery on the top of the closed lid portion fell off. I called lenovo but they dont have a part listing for it..Any clues?

Admin edit: Added PIC warning since I added some pictures to the thread.

#2 Post by **rkawakami** » Fri Feb 06, 2015 8:02 pm

Just to be clear, is this what you're talking about:

If so, there's no FRU in the Hardware Maintenance Manual. Nothing in the Miscellaneous parts listing either.

crazeazn · #3 Post by **crazeazn** » Sat Feb 07, 2015 4:16 am

rkawakami wrote:Just to be clear, is this what you're talking about:

yup thats it... sigh

Admin edit: Removed quoting of image.

dr_st · #4 Post by **dr_st** » Sat Feb 07, 2015 4:50 am

It probably comes with the LCD lid top cover.

#5 Post by **RealBlackStuff** » Sat Feb 07, 2015 4:57 am

It's probably the same sticker as on most other Thinkpads.
Check if e.g. a T60 has the same size, then look for a clearplate, like this: http://www.ebay.com/itm/290878814228

crazeazn · #6 Post by **crazeazn** » Sun Feb 08, 2015 10:33 pm

RealBlackStuff wrote:It's probably the same sticker as on most other Thinkpads.
Check if e.g. a T60 has the same size, then look for a clearplate, like this: http://www.ebay.com/itm/290878814228

it doesnt i just have two indicators

axur-delmeria · #7 Post by **axur-delmeria** » Sun Feb 08, 2015 11:53 pm

it doesnt i just have two indicators

Well, if you're desperate, you can buy that clearplate, try to cut it down (you only need the battery and sleep icons), then put some glue (super glue or what you prefer).

#8 Post by **rkawakami** » Mon Feb 09, 2015 2:00 am

I don't have an X220 (yet) so this may not be exactly what you need....

It is from a T410. It's one that has only two icons on the clear plate for the lid. It might be the same as your X220.

axur-delmeria · #9 Post by **axur-delmeria** » Mon Feb 09, 2015 2:57 am

rkawakami wrote:It is from a T410. It's one that has only two icons on the clear plate for the lid. It might be the same as your X220.

I have an X220. I don't have a ruler with graduations below 1mm to make an accurate measurement, but I think it's close enough. It's not unreasonable to believe that they use the same clearplate.

91011 · #10 Post by **91011** » Mon Feb 09, 2015 11:31 am

If Ray's T410 plate is the right size, you can get a lid from here & remove the plate from it - $11.
http://www.ebay.com/itm/IBM-Lenovo-Thin ... 258d29e035

Have bought several dozen items from this seller.
I would use a small amount of rubber cement to secure it to your lid.

#11 Post by **Tasurinchi** » Mon Feb 09, 2015 3:29 pm

I have a T410 and a X220 and I have just measured them, they're the same size...

crazeazn · #12 Post by **crazeazn** » Mon Feb 09, 2015 8:14 pm

yall, rock

this is seriously the best computing forum ever.

anyone need a t series plate? lol

x220 status indicator fell off. PIC

x220 status indicator fell off. PIC

Re: x220 status indicator fell off.

Re: x220 status indicator fell off.

Re: x220 status indicator fell off. PIC

Re: x220 status indicator fell off. PIC

Re: x220 status indicator fell off. PIC

Re: x220 status indicator fell off. PIC

Re: x220 status indicator fell off. PIC

Re: x220 status indicator fell off. PIC

Re: x220 status indicator fell off. PIC

Re: x220 status indicator fell off. PIC

Re: x220 status indicator fell off. PIC

Who is online