Page 1 of 1

Thinkpad x201 display mod (1900*1200 panel)

Posted: Thu Jun 14, 2018 7:21 pm
by ijunsung
https://item.taobao.com/item.htm?spm=a2 ... =19#detail

I found a interesting link where it sells a panel for X210. Does it fit into X201 with alternation? I mean x210 is almost new model using only thinkpad x201 chassis. it replaces motherboard with cpu as well so I have to buy all of them separately. that is too expensive.

699 Chinese yuan is around $120. this is not bad deal, in my opinion.

I would like to know whether I can install this panel into x201 model.

I appreciate your opinion in advance.

Re: Thinkpad x201 display mod (1900*1200 panel)

Posted: Fri Jun 15, 2018 8:40 am
by axur-delmeria
Not without extensive mods.

IIRC that screen has an eDP (embedded DisplayPort) link, whereas the X201's LCD has an LVDS link.

You'd need to make an adapter board similar to nitrocaster's X220/X230 Full HD kit, which uses the Displayport signals from the docking connector.

Re: Thinkpad x201 display mod (1900*1200 panel)

Posted: Sat Jun 16, 2018 3:40 pm
by madicetea
ijunsung wrote:
Thu Jun 14, 2018 7:21 pm
https://item.taobao.com/item.htm?spm=a2 ... =19#detail

I found a interesting link where it sells a panel for X210. Does it fit into X201 with alternation? I mean x210 is almost new model using only thinkpad x201 chassis. it replaces motherboard with cpu as well so I have to buy all of them separately. that is too expensive.

699 Chinese yuan is around $120. this is not bad deal, in my opinion.

I would like to know whether I can install this panel into x201 model.

I appreciate your opinion in advance.
I feel you man, I like the display mods too.

If it didn't require a stupidly high level of ECE knowledge and fab building to do, I'd take an approximately sized screen and put it into my PC110.

For now, my best X200 machine has an X201 i5 mobo and an X200 AFFS LED screen.

Re: Thinkpad x201 display mod (1900*1200 panel)

Posted: Mon Aug 03, 2020 3:01 pm
by la-luva
Would it be possible to use nitrocasters board (yes i know it does not fit directly on top of motherboard), if you find the correct pins for displayport on X201 motherboard and solder wires from motherboard to nitrocaster board and connect a eDP lcd?

Re: Thinkpad x201 display mod (1900*1200 panel)

Posted: Tue Aug 04, 2020 12:03 am
by RealBlackStuff
Sounds doable if you can find long enough LCD-cables.
Get the X201 and X220 or X230 schematics.
Better even if you can also find a boardview for them.
You need to compare the 'docking connector' on X220/X230 with the 'slice connector' on X201.