x301 vista 64 issues
x301 vista 64 issues
anyone having lockup issues on x301? my ceo has too many issues like this with his. we also try using the usb port replicator and that isn't very good. any help will be great. i will check if there are new drivers. he had to pull the battery to reset the whole system today
Re: x301 vista 64 issues
Is it a clean install of Vista or a factory image from Lenovo? If this happens under the factory image, the laptop is probably eligible for a check according to its warranty. Also, look for driver and BIOS updates on Lenovo website that may address hangs/lockups under Vista (x64). What model is the SSD in this X301?
IBM Lenovo Z61p | 15.4'' WUXGA | Intel Core 2 Duo T7400 2x 2.16GHz | 4 GB Kingston HyperX | Hitachi 7K500 500 GB + WD 1TB (USB) | ATI Mobility FireGL V5200 | ThinkPad Atheros a/b/g | Analog Devices AD1981HD | Win 7 x86 + ArchLinux 2009.08 x64 (number crunching)
Re: x301 vista 64 issues
I agree with Marin. My Vista 64-bit system is rock solid, and I used the Preload to get stated. With respect to the USB port replicator, I got one of these (Lenovo) from my vendor and promptly returned it. Not worth owing in my opinion.
... JDH
... JDH
Re: x301 vista 64 issues
do you use the original build from lenovo and their utilities or have your removed anything?
Today I removed ALL think utilities except the hard disk active protection utility and its running much better. it seemed that windows vista 64 and think utilities were fighting with each other causing slowness and problems. i just upgraded the bios also and cleaned up some disk space. since it has a SSD 128gb drive i am wondering what directories I can remove.
can i delete the c:\drivers directory safely. (i am pretty sure i can)
what about the c:\swtools\
there is another dir I cannot remember maybe c:\swutils (or something like that)
I found there is nearly 8gb in these dir's. It would help a lot to get back the space.
Thanks for any updates.
Today I removed ALL think utilities except the hard disk active protection utility and its running much better. it seemed that windows vista 64 and think utilities were fighting with each other causing slowness and problems. i just upgraded the bios also and cleaned up some disk space. since it has a SSD 128gb drive i am wondering what directories I can remove.
can i delete the c:\drivers directory safely. (i am pretty sure i can)
what about the c:\swtools\
there is another dir I cannot remember maybe c:\swutils (or something like that)
I found there is nearly 8gb in these dir's. It would help a lot to get back the space.
Thanks for any updates.
Re: x301 vista 64 issues
Well, swtools and swutils don´t belong to Vista in any way. Since you have uinstalled most of the thinkvantage bloatware, I don´t see a reason why you would need that folders on your system (unless you´d like to reinstall some of those tvt applications).
IBM Lenovo Z61p | 15.4'' WUXGA | Intel Core 2 Duo T7400 2x 2.16GHz | 4 GB Kingston HyperX | Hitachi 7K500 500 GB + WD 1TB (USB) | ATI Mobility FireGL V5200 | ThinkPad Atheros a/b/g | Analog Devices AD1981HD | Win 7 x86 + ArchLinux 2009.08 x64 (number crunching)
Re: x301 vista 64 issues
@johnp126 - I have most of the Lenovo utilities installed (because I used the Preload). They do not slow down my system at all or fight with each other. They do have their problems, but hurting my system is not among them. I use the Preload because it is simply vastly faster to preload and uninstall 3 things, than to install clean and install 2 dozen (plus or minus) required and useful things. ... JDH
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Question about an X301
by mazzinia » Tue Jan 10, 2017 9:19 am » in ThinkPad X200/201/220 and X300/301 Series - 28 Replies
- 2945 Views
-
Last post by Temetka
Sun Mar 05, 2017 9:38 pm
-
-
-
FOUND: X301 keyboard with US layout
by 600X » Tue Feb 14, 2017 8:35 pm » in Marketplace - Forum Members only - 0 Replies
- 219 Views
-
Last post by 600X
Tue Feb 14, 2017 8:35 pm
-
-
- 3 Replies
- 415 Views
-
Last post by rkawakami
Wed Mar 01, 2017 6:49 pm
-
- 3 Replies
- 325 Views
-
Last post by 3h
Tue Mar 28, 2017 12:39 pm
Who is online
Users browsing this forum: No registered users and 6 guests






