Page 1 of 1
Poor performance on Agility3 and t410 ? Pls look
Posted: Fri Aug 17, 2012 6:14 am
by rychuu
Hello,
I have installed new, clean system on one big partition on my new ssd drive - OCZ Agility 3 60gb.
I have checked performance by CDM x64 and Ive got this:
http://imageshack.us/photo/my-images/269/63101371.png/
Is it good result? May should I change sometinhing in BIOS? I have all drivers fronm windows update and system upodate up2date
Re: Poor performance on Agility3 and t410 ? Pls look
Posted: Fri Aug 17, 2012 6:16 am
by rychuu
I have not checked performance of my older HDD. I dont know is this matter
Re: Poor performance on Agility3 and t410 ? Pls look
Posted: Fri Aug 17, 2012 8:14 am
by Cigarguy
Read speed is in the ballpark, write speed seems slow to me. Most manufacturers use ATTO to benchmark and specify their drive speeds. Give this a try and report back.
http://www.techpowerup.com/downloads/17 ... v2.46.html
Re: Poor performance on Agility3 and t410 ? Pls look
Posted: Sat Aug 18, 2012 11:43 am
by jayton4
Are you using the latest firmware from OCZ?
Is the drive brand new or was there a previous partition on it before? If it has been used before, then you should do a secure erase on it first before the OS is installed. This can be done with "Parted Magic"
When I run that same test on my Corsair Force GT 120GB, which has the same SF-2281 controller as the Agility 3, I get the following numbers:
45% (50/112GB)
Seq. 247.4 177.1
512k 234.3 177.9
4k 18.11 28.09
4kQD32 161.9 174.3
ATTO says 252MB/s write and 263MB/s read. This is on the T410 2518X01. I installed plain Windows 7 rather than using the Lenovo recovery disc.
Make sure you have Airbag disabled. Disable Wi-Fi during the test to make sure Windows Update or any of the programs in the system tray are not downloading or uploading anything, such as online backup services or steam downloads. If you got 8GB RAM, then you can disable the page file. As far as BIOS, the only setting you need to make sure of is AHCI enabled.
Re: Poor performance on Agility3 and t410 ? Pls look
Posted: Sun Sep 09, 2012 7:23 am
by rychuu
Thank you for your reply, sorry for late reply,
jayton4 wrote:Are you using the latest firmware from OCZ?
yes.
Is the drive brand new or was there a previous partition on it before? If it has been used before, then you should do a secure erase on it first before the OS is installed. This can be done with "Parted Magic"
When I making tests drive was absoultely new but not wiped. Just connected into computer and partitioned by Win installer.
Now I have done secure erase by OCZ Toolbox, and I will try sec erase by Partition Magic.
When I run that same test on my Corsair Force GT 120GB, which has the same SF-2281 controller as the Agility 3, I get the following numbers:
45% (50/112GB)
Seq. 247.4 177.1
512k 234.3 177.9
4k 18.11 28.09
4kQD32 161.9 174.3
ATTO says 252MB/s write and 263MB/s read. This is on the T410 2518X01. I installed plain Windows 7 rather than using the Lenovo recovery disc.
Yes, plain installation w7 x64 EN.
Make sure you have Airbag disabled. Disable Wi-Fi during the test to make sure Windows Update or any of the programs in the system tray are not downloading or uploading anything, such as online backup services or steam downloads. If you got 8GB RAM, then you can disable the page file. As far as BIOS, the only setting you need to make sure of is AHCI enabled.
Yes, I will try this way, thank you.
Re: Poor performance on Agility3 and t410 ? Pls look
Posted: Sat Sep 29, 2012 9:44 am
by rychuu
Hello,
I need long time to testing but I would like to ask you last time about my actual ratings:
I've made three tests on Intel 520 60GB SSD. Is it good result? I can publish test on my Agility 3 else. But results were similar.
