I think i blew a fuse...

T400/410/420 and T500/510/520 series specific matters only
Post Reply
Message
Author
Outatime1989
Posts: 42
Joined: Thu Jun 26, 2008 6:19 pm
Location: Oswego, NY
Contact:

I think i blew a fuse...

#1 Post by Outatime1989 » Mon Jul 15, 2013 8:07 pm

When i replaced the LCD on my T410s, i forgot to remove the battery. It powers up just fine, for some reason the ThinkLight comes on every time, but i have no backlight. is there anywhere i can send it to replace the fuse?
Daily Use: T410s 2904-HDU, X301 4057-18U, T61 7659-01U
Classics: TR451 14" Mod, X32 2673-M4U T23 2647-HNU
Legacy: 560e 2640-30U, 560z 2640-B0U, 570e 2644-6BU, 600X 2645-8EU, 2645-5FU

Outatime1989
Posts: 42
Joined: Thu Jun 26, 2008 6:19 pm
Location: Oswego, NY
Contact:

Re: I think i blew a fuse...

#2 Post by Outatime1989 » Wed Jul 24, 2013 9:20 am

Another thought i had would be to swap in a t420s or t430s motherboard. Does anyone know if this is possible?
Daily Use: T410s 2904-HDU, X301 4057-18U, T61 7659-01U
Classics: TR451 14" Mod, X32 2673-M4U T23 2647-HNU
Legacy: 560e 2640-30U, 560z 2640-B0U, 570e 2644-6BU, 600X 2645-8EU, 2645-5FU

AIX
Senior Member
Senior Member
Posts: 502
Joined: Wed Oct 19, 2005 3:10 am
Location: Bucharest, Romania, EU

Re: I think i blew a fuse...

#3 Post by AIX » Wed Jul 24, 2013 1:10 pm

I don't think it will work, at least not without modding the bottom case; take a look at the back of the T420s and T410s here, there are some visible differences (VGA on the opposite sides, e-SATA on T410s but not on T420s, the ethernet port not on the same position):

http://www.notebookcheck.net/Review-Len ... 967.0.html
http://www.notebookcheck.net/Review-Len ... 386.0.html

More than that, I know T410s uses 1.8 HDDs/SSDs (with different connector than the regular 2.5" one?), pay attention T420s uses 2.5" HDDs/SSDs 7mm height; I'm not sure, even you're modding the back of the bottom case, if you can put a 2.5" in a T410s case without doing other modifications.
T430 · i7-3632QM · 12GB RAM · 512GB SSD · HD+ · NVIDIA NVS 5400M · H5321gw
T420s · i5-2520M · 12GB RAM · 480GB SSD · HD+ · HD3000 · F5521gw
T60 · T2500 · 3GB RAM · 128GB SSD · 14.1 SXGA+ · 128MB ATI X1400
Past: T400, T41, T22, 600X, 390X

richk
Moderator
Moderator
Posts: 2911
Joined: Sun Jan 01, 2006 3:29 pm
Location: San Francisco, CA

Re: I think i blew a fuse...

#4 Post by richk » Sun Jul 28, 2013 11:02 am

Lenovo only replaces motherboards. You need fairly good equipment to work on the boards. A quartz preheater and a good temperature-controlled rework station would be the minimum. Which board do you need? (CPU and graphics type) I have a couple in stock and could offer an exchange

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T400/410/420 and T500/510/520 Series”

Who is online

Users browsing this forum: No registered users and 4 guests