Relacement fan / heatsink for T500 - 45N5490

T400/410/420 and T500/510/520 series specific matters only
Post Reply
Message
Author
herlihyboy
Posts: 3
Joined: Sat Dec 14, 2013 7:21 am
Location: Mount Vernon, IN USA

Relacement fan / heatsink for T500 - 45N5490

#1 Post by herlihyboy » Sun Dec 15, 2013 10:30 am

I'm putting together a T500 that I bought on eBay (hard drive, etc.). I sporadically get a "Fan error" when I boot up and, when the fan does kick in, it's loud and shuts down immediately. I was able to get it to stay on enough to get the OS loaded and some other software. I'm pretty sure I need to replace the fan / heatsink, or at least open it up and make sure it's not clogged and needs to be blown out.

In looking for a replacement unit (45N5490), most of them run >$80. Any suggestions on where I might find a replacement fan / heatsink for a reasonable price? Just watch eBay periodically? I'm willing to try a refurbished one if the cost is reasonable.

Thanks,

Ryan

agklimit
Posts: 4
Joined: Thu Mar 22, 2012 9:09 am
Location: Melbourne, Australia

Re: Relacement fan / heatsink for T500 - 45N5490

#2 Post by agklimit » Thu Dec 26, 2013 12:26 am

There's a FRU # 45N5490 now on eBay for approx. 50 US bucks (incl. postage). It's not cheap, but this FRU seems to be less common than 45N5492 (which is for the T500 with discrete graphics), which is quite a bit cheaper.

RealBlackStuff
Admin
Admin
Posts: 17512
Joined: Mon Sep 18, 2006 5:17 am
Location: Mt. Cobb, PA USA
Contact:

Re: Relacement fan / heatsink for T500 - 45N5490

#3 Post by RealBlackStuff » Thu Dec 26, 2013 6:57 am

I would buy just the fan itself, for some it's perhaps too much DIY, but well worth it.
And possibly the discrete fan might also fit with minor modification over the GPU itself.
Lovely day for a Guinness! (The Real Black Stuff)

Check out The Boardroom for Parts, Mods and Other Services.

rsutoratosu
Sophomore Member
Posts: 169
Joined: Fri Mar 04, 2011 11:43 am
Location: London, UK

Re: Relacement fan / heatsink for T500 - 45N5490

#4 Post by rsutoratosu » Fri Jan 03, 2014 3:29 pm

Have you look into re-oiling the fan ? there was a thread on how to do it.. should be easy, I done it with all my failing fan

nforce4max
Posts: 24
Joined: Wed Jan 15, 2014 5:43 pm
Location: Waco, Texas USA

Re: Relacement fan / heatsink for T500 - 45N5490

#5 Post by nforce4max » Wed Jan 15, 2014 6:30 pm

Just salvage the one you have and save the cash for upgrades, the fan comes off very easily and had to do this my self to scrub the cooler. Mine has been going strong after over 23,000 hours of use, I am second owner and have modded this thing like there is nothing better. :twisted:

Be sure to scrub those fins really good with a tooth brush and use only the best thermal compound on the market for great results. Remove all the stickers on the cooler (save them if you must) for a small 1-3c improvement. I even removed all the tape on the board and gained a 5c improvement on top of everything else. :banana:

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T400/410/420 and T500/510/520 Series”

Who is online

Users browsing this forum: No registered users and 5 guests