Installing a new copy of Windows 7 64 Ultimate on T410
Installing a new copy of Windows 7 64 Ultimate on T410
Hi,
I have an old T410, originally with 4GB, and 128GB spinning HDD, Windows 7 32 bits Professional. The BIOS setting for SATA was set to COMPATIBLE mode.
I upgraded the RAM to 6GB - removed the back module 2GB, and replaced it with 4GB module. Found it nearly impossible to remove the Keyboard in order to upgrade the RAM module to a total of 8GB. But 6GB is enough to install Windows 7 64 bits.
Replaced the HDD with a 256GB Transcend SSD (formatted as NTFS).
I also changed the SATA mode to AHCI.
I put in the Windows 7 64 bits Ultimate DVD into the DVD drive and boot up. It came up with the following .... "Loading Windows" ... followed by "Starting Windows" ....... then nothing after that.
Changing the SATA mode back to COMPATIBLE does not change the behavior. It still hangs after "Starting Windows".
Has anybody encountered this problem before?
Thank you,
TingSern
I have an old T410, originally with 4GB, and 128GB spinning HDD, Windows 7 32 bits Professional. The BIOS setting for SATA was set to COMPATIBLE mode.
I upgraded the RAM to 6GB - removed the back module 2GB, and replaced it with 4GB module. Found it nearly impossible to remove the Keyboard in order to upgrade the RAM module to a total of 8GB. But 6GB is enough to install Windows 7 64 bits.
Replaced the HDD with a 256GB Transcend SSD (formatted as NTFS).
I also changed the SATA mode to AHCI.
I put in the Windows 7 64 bits Ultimate DVD into the DVD drive and boot up. It came up with the following .... "Loading Windows" ... followed by "Starting Windows" ....... then nothing after that.
Changing the SATA mode back to COMPATIBLE does not change the behavior. It still hangs after "Starting Windows".
Has anybody encountered this problem before?
Thank you,
TingSern
Re: Installing a new copy of Windows 7 64 Ultimate on T410
Have you tested the windows dvd in other computers?
Current Thinkpads: W530 (functional classic keyboard mod), X301, T61, T60, T43, T23, 600X, 770
Other: mk5 Toughbook cf-19, mk1 Toughbook cf-53
Other: mk5 Toughbook cf-19, mk1 Toughbook cf-53
-
ajkula66
- SuperUserGeorge

- Posts: 15737
- Joined: Sun Feb 25, 2007 11:28 am
- Location: Brodheadsville, Pennsylvania
Re: Installing a new copy of Windows 7 64 Ultimate on T410
You could have several possible culprits...not in any particular order:
a) RAM. Download and burn a CD of memtest 86 and boot from it, testing one slot at the time with both "old" and "new" RAM.
b) Test the install media in another computer.
c) Install your old hard drive and verify whether the machine works with no issues. When I hear "Transcend", I shiver. And I'll guarantee you that I'm far from being the only one on this forum who feels that way.
Good luck and keep us posted.
a) RAM. Download and burn a CD of memtest 86 and boot from it, testing one slot at the time with both "old" and "new" RAM.
b) Test the install media in another computer.
c) Install your old hard drive and verify whether the machine works with no issues. When I hear "Transcend", I shiver. And I'll guarantee you that I'm far from being the only one on this forum who feels that way.
Good luck and keep us posted.
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: R61
PMs requesting personal tech support will be ignored.
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: R61
PMs requesting personal tech support will be ignored.
Re: Installing a new copy of Windows 7 64 Ultimate on T410
Put the old hard drive back in and see if that works. If it still stalls, put the old 2Gb memory stick back and see if it works then.
Keith
(Formerly 600E 2645, T30 2366, X31 2673, T40 2373, T41 2379, T42 2373, T42 2379, T60 1952, T61p 8889, T61p 8891
Currently T420 4177-CTO, T430 2347-A54, T430 2347-UN9, T430 2349-L64, T430 2342-CTO, H520S 2561-1LU, Ideapad K1)
(Formerly 600E 2645, T30 2366, X31 2673, T40 2373, T41 2379, T42 2373, T42 2379, T60 1952, T61p 8889, T61p 8891
Currently T420 4177-CTO, T430 2347-A54, T430 2347-UN9, T430 2349-L64, T430 2342-CTO, H520S 2561-1LU, Ideapad K1)
Re: Installing a new copy of Windows 7 64 Ultimate on T410
Hi,
Problem solved. T410 has the iCore 5 processor - and cannot use high density RAM modules. I tried to reuse my W540 (iCore 7) RAM modules (2 x 4GB) in my T410 - but, those RAM modules are high density. I have to use low density RAM modules on T410.
About Transcend SSD - yes - I totally agree with you. It is HORRIBLE. This is my 3rd one (within one year) - and I am using it as "spare" now. I use Intel SSDs for my W540 - so far so good. Samsung SSDs for my other laptops - NO MORE Transcend !!!!
TS
Problem solved. T410 has the iCore 5 processor - and cannot use high density RAM modules. I tried to reuse my W540 (iCore 7) RAM modules (2 x 4GB) in my T410 - but, those RAM modules are high density. I have to use low density RAM modules on T410.
About Transcend SSD - yes - I totally agree with you. It is HORRIBLE. This is my 3rd one (within one year) - and I am using it as "spare" now. I use Intel SSDs for my W540 - so far so good. Samsung SSDs for my other laptops - NO MORE Transcend !!!!
TS
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Installing windows 98 video driver on t43 with ati video card
by OnionLand » Sat Mar 18, 2017 2:02 pm » in ThinkPad T4x Series - 13 Replies
- 1421 Views
-
Last post by OnionLand
Wed Mar 22, 2017 1:02 pm
-
-
-
X270: M.2 disk for installing 32-bit Windows?
by Edward Mendelson » Wed Jun 21, 2017 10:06 am » in ThinkPad X230 and later Series - 4 Replies
- 139 Views
-
Last post by Edward Mendelson
Wed Jun 21, 2017 12:27 pm
-
-
-
G41 / INTEL up for sale - Ultimate price drop
by wujstefan » Fri Feb 24, 2017 4:26 pm » in Marketplace - Forum Members only - 0 Replies
- 966 Views
-
Last post by wujstefan
Wed Mar 01, 2017 4:20 pm
-
-
-
SOLD: the ultimate Frankenpad package
by wujstefan » Mon Apr 10, 2017 12:29 am » in Marketplace - Forum Members only - 2 Replies
- 745 Views
-
Last post by wujstefan
Tue Apr 25, 2017 5:30 am
-
Who is online
Users browsing this forum: No registered users and 3 guests




