T500 powers back up if AC adapter is disconnected or screen lid closed
-
cadillacmike68
- Senior Member

- Posts: 708
- Joined: Fri May 27, 2011 9:19 pm
- Location: Not on Planet Znutar (FL)
T500 powers back up if AC adapter is disconnected or screen lid closed
I have a T500 that passes all diag checks but when I shut it down it powers back up if i close the lid or disconnect the ac adapter! I have to quickly remove the battery before it reboots into windoze. I can then reconnect the battery and it will not try to power back up on its own.
OS is win7 pro 64
I have hibernate disabled, power button is set to power off, no wake on Lan, or anything like that.
Any ideas?
OS is win7 pro 64
I have hibernate disabled, power button is set to power off, no wake on Lan, or anything like that.
Any ideas?
760LD 9547 FUBARd
T21 2647; T22 2647 4@ 900MHz, 1@ 1GHz SXGA+; T23 2647 2@ 1.13GHz, 1@ 1.2GHz SXGA+, WiFi
T30 2366-88U 2GHz; 2366-83U 1.8G; 5@ 2366-LU0/66U; 2367-KU6 FUBARd
T61 8897, 2.4GHz SXGA+; 8898, 2.4GHz; 6463, 2.4 & 2.1GHz WSXGA+; 7658, 2.5GHz; T61p, 3 more T61s
T500 2
T21 2647; T22 2647 4@ 900MHz, 1@ 1GHz SXGA+; T23 2647 2@ 1.13GHz, 1@ 1.2GHz SXGA+, WiFi
T30 2366-88U 2GHz; 2366-83U 1.8G; 5@ 2366-LU0/66U; 2367-KU6 FUBARd
T61 8897, 2.4GHz SXGA+; 8898, 2.4GHz; 6463, 2.4 & 2.1GHz WSXGA+; 7658, 2.5GHz; T61p, 3 more T61s
T500 2
-
cadillacmike68
- Senior Member

- Posts: 708
- Joined: Fri May 27, 2011 9:19 pm
- Location: Not on Planet Znutar (FL)
Re: T500 powers back up if AC adapter is disconnected or screen lid closed
No ideas on this?
760LD 9547 FUBARd
T21 2647; T22 2647 4@ 900MHz, 1@ 1GHz SXGA+; T23 2647 2@ 1.13GHz, 1@ 1.2GHz SXGA+, WiFi
T30 2366-88U 2GHz; 2366-83U 1.8G; 5@ 2366-LU0/66U; 2367-KU6 FUBARd
T61 8897, 2.4GHz SXGA+; 8898, 2.4GHz; 6463, 2.4 & 2.1GHz WSXGA+; 7658, 2.5GHz; T61p, 3 more T61s
T500 2
T21 2647; T22 2647 4@ 900MHz, 1@ 1GHz SXGA+; T23 2647 2@ 1.13GHz, 1@ 1.2GHz SXGA+, WiFi
T30 2366-88U 2GHz; 2366-83U 1.8G; 5@ 2366-LU0/66U; 2367-KU6 FUBARd
T61 8897, 2.4GHz SXGA+; 8898, 2.4GHz; 6463, 2.4 & 2.1GHz WSXGA+; 7658, 2.5GHz; T61p, 3 more T61s
T500 2
-
ajkula66
- SuperUserGeorge

- Posts: 15731
- Joined: Sun Feb 25, 2007 11:28 am
- Location: Brodheadsville, Pennsylvania
Re: T500 powers back up if AC adapter is disconnected or screen lid closed
My best guess would be something along the lines of a messed-up charging circuit on the motherboard.
Just for S&G, have you tried another battery in that system?
Just for S&G, have you tried another battery in that system?
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: R61
PMs requesting personal tech support will be ignored.
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: R61
PMs requesting personal tech support will be ignored.
-
cadillacmike68
- Senior Member

- Posts: 708
- Joined: Fri May 27, 2011 9:19 pm
- Location: Not on Planet Znutar (FL)
Re: T500 powers back up if AC adapter is disconnected or screen lid closed
Not yet, but I will. I have a dozen bats for this and my T61sajkula66 wrote:My best guess would be something along the lines of a messed-up charging circuit on the motherboard.
Just for S&G, have you tried another battery in that system?
760LD 9547 FUBARd
T21 2647; T22 2647 4@ 900MHz, 1@ 1GHz SXGA+; T23 2647 2@ 1.13GHz, 1@ 1.2GHz SXGA+, WiFi
T30 2366-88U 2GHz; 2366-83U 1.8G; 5@ 2366-LU0/66U; 2367-KU6 FUBARd
T61 8897, 2.4GHz SXGA+; 8898, 2.4GHz; 6463, 2.4 & 2.1GHz WSXGA+; 7658, 2.5GHz; T61p, 3 more T61s
T500 2
T21 2647; T22 2647 4@ 900MHz, 1@ 1GHz SXGA+; T23 2647 2@ 1.13GHz, 1@ 1.2GHz SXGA+, WiFi
T30 2366-88U 2GHz; 2366-83U 1.8G; 5@ 2366-LU0/66U; 2367-KU6 FUBARd
T61 8897, 2.4GHz SXGA+; 8898, 2.4GHz; 6463, 2.4 & 2.1GHz WSXGA+; 7658, 2.5GHz; T61p, 3 more T61s
T500 2
-
cadillacmike68
- Senior Member

- Posts: 708
- Joined: Fri May 27, 2011 9:19 pm
- Location: Not on Planet Znutar (FL)
Re: T500 powers back up if AC adapter is disconnected or screen lid closed
OK, I tried a new (only one prior use and that was when I initially charged it up a month ago) battery and it does the same thing.
It's a back burner issue for now. I'll try an absolute bare bones config, maybe take out PM, etc. and I'll re-run the diag tests.
I wanted to use this as my new travel-business machine, but not if its acting like this. The old T61s are running fine, and I'm on one now.
It's a back burner issue for now. I'll try an absolute bare bones config, maybe take out PM, etc. and I'll re-run the diag tests.
I wanted to use this as my new travel-business machine, but not if its acting like this. The old T61s are running fine, and I'm on one now.
760LD 9547 FUBARd
T21 2647; T22 2647 4@ 900MHz, 1@ 1GHz SXGA+; T23 2647 2@ 1.13GHz, 1@ 1.2GHz SXGA+, WiFi
T30 2366-88U 2GHz; 2366-83U 1.8G; 5@ 2366-LU0/66U; 2367-KU6 FUBARd
T61 8897, 2.4GHz SXGA+; 8898, 2.4GHz; 6463, 2.4 & 2.1GHz WSXGA+; 7658, 2.5GHz; T61p, 3 more T61s
T500 2
T21 2647; T22 2647 4@ 900MHz, 1@ 1GHz SXGA+; T23 2647 2@ 1.13GHz, 1@ 1.2GHz SXGA+, WiFi
T30 2366-88U 2GHz; 2366-83U 1.8G; 5@ 2366-LU0/66U; 2367-KU6 FUBARd
T61 8897, 2.4GHz SXGA+; 8898, 2.4GHz; 6463, 2.4 & 2.1GHz WSXGA+; 7658, 2.5GHz; T61p, 3 more T61s
T500 2
Re: T500 powers back up if AC adapter is disconnected or screen lid closed
My T520 will sometimes not go to sleep when closing the lid. Sometimes it does. Other times when the lid is closed it will go to sleep and 15 seconds later wake up again.
When I use the Fn-F4 combo it always nods right off and doesn't re-awaken, but last night it did. Woke up 10 seconds after I put it to sleep. First time for that.
This is the only system I have that does this. In the past I had a E530 that would never sleep consistently either.
I don't put much faith in the Lenovo Power Manager program nor Windows 7 either. Frankly, I don't think it's the software if both apps are allowing this to happen. It's a hardware glitch somewhere that I've never been able to track down so I just live with it. If I pack it up to go somewhere I make certain it is shutdown all the way and remove the battery.
When I use the Fn-F4 combo it always nods right off and doesn't re-awaken, but last night it did. Woke up 10 seconds after I put it to sleep. First time for that.
This is the only system I have that does this. In the past I had a E530 that would never sleep consistently either.
I don't put much faith in the Lenovo Power Manager program nor Windows 7 either. Frankly, I don't think it's the software if both apps are allowing this to happen. It's a hardware glitch somewhere that I've never been able to track down so I just live with it. If I pack it up to go somewhere I make certain it is shutdown all the way and remove the battery.
T510 i5, T510 i7 4349-A64 - T520 i7 4242-4UU, technically a CTO now.
T520: i7-2760QM(2.40GHz),16GB RAM, 500GB SSD/500GB 7200 RPM Drive, 15.6in 1600x900 LCD, 1GB NVIDIA, DVDRW, Smartcard reader, media card reader, FPR, Win7 Pro64, whitelist BIOS, Ultimate-N 6300 AGN, German KB, Bluetooth 4.0.
T520: i7-2760QM(2.40GHz),16GB RAM, 500GB SSD/500GB 7200 RPM Drive, 15.6in 1600x900 LCD, 1GB NVIDIA, DVDRW, Smartcard reader, media card reader, FPR, Win7 Pro64, whitelist BIOS, Ultimate-N 6300 AGN, German KB, Bluetooth 4.0.
-
cadillacmike68
- Senior Member

- Posts: 708
- Joined: Fri May 27, 2011 9:19 pm
- Location: Not on Planet Znutar (FL)
Re: T500 powers back up if AC adapter is disconnected or screen lid closed
Mika,
I don't want it to sleep or do anything when I close the lid, because I sometimes use it in the advanced dock. I think I have that set correctly. but I'll check again.
When I want it off, I use Shutdown. But it won't stay off.
I might end up doing what you do, remove battery and shut it down. Now that I'm back home, I can try removing components and digging into BIOS to see it it is a component / option that is causing this.
I don't want it to sleep or do anything when I close the lid, because I sometimes use it in the advanced dock. I think I have that set correctly. but I'll check again.
When I want it off, I use Shutdown. But it won't stay off.
I might end up doing what you do, remove battery and shut it down. Now that I'm back home, I can try removing components and digging into BIOS to see it it is a component / option that is causing this.
760LD 9547 FUBARd
T21 2647; T22 2647 4@ 900MHz, 1@ 1GHz SXGA+; T23 2647 2@ 1.13GHz, 1@ 1.2GHz SXGA+, WiFi
T30 2366-88U 2GHz; 2366-83U 1.8G; 5@ 2366-LU0/66U; 2367-KU6 FUBARd
T61 8897, 2.4GHz SXGA+; 8898, 2.4GHz; 6463, 2.4 & 2.1GHz WSXGA+; 7658, 2.5GHz; T61p, 3 more T61s
T500 2
T21 2647; T22 2647 4@ 900MHz, 1@ 1GHz SXGA+; T23 2647 2@ 1.13GHz, 1@ 1.2GHz SXGA+, WiFi
T30 2366-88U 2GHz; 2366-83U 1.8G; 5@ 2366-LU0/66U; 2367-KU6 FUBARd
T61 8897, 2.4GHz SXGA+; 8898, 2.4GHz; 6463, 2.4 & 2.1GHz WSXGA+; 7658, 2.5GHz; T61p, 3 more T61s
T500 2
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Closed: Vista Business recovery discs for X61t
by fultontech » Sat Mar 18, 2017 9:36 pm » in Marketplace - Forum Members only - 0 Replies
- 196 Views
-
Last post by fultontech
Sat Mar 18, 2017 9:36 pm
-
-
-
WTB: X60T/X61T SXGA+, Complete Top Lid or Screen Only
by olex126 » Mon Mar 27, 2017 7:55 pm » in Marketplace - Forum Members only - 0 Replies
- 238 Views
-
Last post by olex126
Mon Mar 27, 2017 7:55 pm
-
-
- 3 Replies
- 536 Views
-
Last post by SaberX
Tue Jan 10, 2017 4:24 pm
-
-
ThinkPad T43/p in T41p casing - cannot turn back on after shutdown with charger left plugged
by kfzhu1229 » Wed Feb 01, 2017 1:38 am » in ThinkPad T4x Series - 2 Replies
- 1296 Views
-
Last post by kfzhu1229
Wed Feb 01, 2017 8:20 am
-
Who is online
Users browsing this forum: No registered users and 6 guests




