Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

AMT, AT, can't disable

T400/410/420 and T500/510/520 series specific matters only
Post Reply
Message
Author
rdrake
Posts: 14
Joined: Wed Jun 27, 2018 4:47 pm
Location: Kingsville, Canada

AMT, AT, can't disable

#1 Post by rdrake » Sat Oct 13, 2018 10:54 am

Okay, so I disabled both in bios but I used a diagnostic program (HWiNFO64) and it shows that both are still active. So I did some research and found you should reactive both, then CTRL-P on boot, go in and change the Intel AT password, then disable there. Then I went back and disabled in the bios again but STILL shows as active. Then downloaded the AMT firmware update that's supposed to fix the issues but everything shows as active still. Any ideas?

Is this a high risk? I bought both my T430 and T440 from a guy on Kijiji so I'm guessing he could potentially have messed with this. I'm not a super geek so I'd need step by step instructions on how to disable and also looking for a way to confirm if what I do to disable actually worked.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T400/410/420 and T500/510/520 Series”

Who is online

Users browsing this forum: Carbon_Dater, Maxzep and 14 guests