Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

T520 high temp with i7 2760qm + discrete-graphics HF assembly

T400/T410/T420 and T500/T510/T520 series specific matters only
Post Reply
Message
Author
vgiozo
Posts: 18
Joined: Wed Mar 11, 2020 6:32 am
Location: Thessaloniki, Greece

T520 high temp with i7 2760qm + discrete-graphics HF assembly

#1 Post by vgiozo » Sun Sep 20, 2020 3:55 am

I recently installed an i7 2760qm processor in my T520 laptop (factory i5 2520m cpu) and I upgraded my single heatpipe heatsing-fan assembly for integrated graphics to a discrete-graphics HF assembly, with larger CPU heatpipe.

https://i.ebayimg.com/images/g/DmUAAOxy ... -l1600.jpg

However, I am witnessing much higher temps than expected...
- Idle (no work down) : 46C
- Full load (Prime testing) : ~85C with Max temp 89C on the 4th Core (max temp on 1st core 84C)

I used an expensive Thermal Grizzly - Kryonaut thermal paste, arguably the best paste around right now, removing (with isopropyl alcohol 96% purity) the factory thermal paste on the cooler...I usually also apply some to Heatsink itself and spread it to a very thin film..works for me on PCs, but I omitted doing it this time.

Is this normal, is this high temp?

I should say I reside in Greece and although it's summer, the temps are currently down to a ~26C...certainly not the 38-40C we saw like a month ago.

Should I re-paste? Should I reseat the cooler?
I used the recommended dosage, but a little length-wise of the cpu instead of a single circular bead of paste.

Input appreciated.
T520 4243-AF5 (R9-KKBG3), HD+ 1600*900, i5 2520m, 2*8GB DDR3L 1333, Plextor mSATA, 2*500GB HDD (caddy), no eSATA, 4*USB 2,0, no modem

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T400/T410/T420 and T500/T510/T520 Series”

Who is online

Users browsing this forum: No registered users and 10 guests