Page 1 of 1
[Solved] Switchable Graphics on T500 with Win7
Posted: Sun Apr 17, 2011 9:21 am
by blueice_haller
Hello,
I recently installed Win7 on my ThinkPad T500. Probably while setup with only one GPU activated in BIOS.
So when I boot with Intel GMA, it loads this driver. And if I boot with ATI/AMD, it also loads the driver correct.
But if I boot with Switchable Graphics it shows me an bluescreen instead of login screen.
Thanks for help.
Re: Switchable Graphics on T500 with Win7
Posted: Sun Apr 17, 2011 10:48 am
by Harryc
Can't get to your link without being a member there ...
Re: Switchable Graphics on T500 with Win7
Posted: Sun Apr 17, 2011 11:42 am
by blueice_haller
Ok sorry I corrected the link.
Re: Switchable Graphics on T500 with Win7
Posted: Sun Apr 17, 2011 11:51 am
by Colonel O'Neill
Turn on Switchable option in BIOS, boot to safe mode, uninstall both graphics adapters and driver softwares. Reboot and see if it loads normally. If so, try installing the graphics driver then.
Re: Switchable Graphics on T500 with Win7
Posted: Sun Apr 17, 2011 11:55 am
by sarbin
welcome to the forum.
your image hosting site is popping windows over and under my ff browser window and i think i've blocked about 50 cookie-setting attempts, so i killed it off. can you post the error code from your bsod?
Re: Switchable Graphics on T500 with Win7
Posted: Sun Apr 17, 2011 12:06 pm
by Colonel O'Neill
OP's picture loads fine for me.
STOP 7E
0xC0000005, 0x81AE3DA6, 0x88E4B070, 0x88E4AC50
I think I had a similar BSoD while mucking with the drivers for overclocking. Fixed it after two hours of tinkering with it.
Re: Switchable Graphics on T500 with Win7
Posted: Sun Apr 17, 2011 12:09 pm
by blueice_haller
Ok I now will try the tip from
#p626907
Re: Switchable Graphics on T500 with Win7
Posted: Mon Apr 18, 2011 11:29 am
by blueice_haller
I don't know what I'm doing wrong.
Report.xml.2011_04_18_18.13.11.xml from
7vd616ww.exe Setup:
-> The driver installation wasn't successful.
Re: Switchable Graphics on T500 with Win7
Posted: Mon Apr 18, 2011 11:48 am
by Colonel O'Neill
It happens; I tried using Discrete only for a while. Going to Discrete went perfectly smoothly. Going back to Switchable took about two or three hours of fiddling with it with similar error messages/BSoDs. Eventually got it to work; no clue what I did.
Try going to Device Manager, doing a manual driver install, and pointing it at the C:\DRIVERS\VIDEO\...\Packages\drivers\W7 (choose architecture; W76 is 64-bit)
Re: Switchable Graphics on T500 with Win7
Posted: Mon Apr 18, 2011 12:05 pm
by blueice_haller
In my device manager there are two graphic cards named "Unknown device"
C:\DRIVERS\WIN\VIDEO\Packages\Drivers\Display\W7_INF\CW107489.inf
When I try to install the driver from the path, I got this message.
German: Treiber ist für diese Plattform nicht vorgesehen.
English: Device Driver not intended for this platform.
I also know this page:
Windows 7 BETA Drivers and Utilities. I believed that this is an older driver: 7vd611ww
Amazing, the manual install of the driver only from 7vd611ww led to success. It is Version 8.641.1.0 , newest is 8.752.4.0 .
Now when I do rightclick at "Energy Manager" symbol in can switch the graphic cards.
And with Fn+F7 I start "Presentation Director" and select display settings - but only with Intel.
Thanks again. Do I still need Vista?
Re: [Solved] Switchable Graphics on T500 with Win7
Posted: Mon Apr 18, 2011 1:25 pm
by Colonel O'Neill
7vd611ww is okay, but it suffers from both graphics cards reactivating after resume.
Not sure what you mean with regards to Vista.
