I just got the Lenovo T410 but my touchpad doesn't work...
I just got the Lenovo T410 but my touchpad doesn't work...
I looked at my mouse settings and it looks like I don't have the UltraNav utility for my mouse. I tried downloading the mouse driver off the website but it did not help. Can someone help me with this issue?
Thanks in advance
Thanks in advance
-
Colonel O'Neill
- ThinkPadder

- Posts: 1359
- Joined: Tue Oct 27, 2009 8:03 am
- Location: Vancouver
Re: I just got the Lenovo T410 but my touchpad doesn't work...
Did you try these?
http://www-307.ibm.com/pc/support/site. ... MIGR-66898
http://www-307.ibm.com/pc/support/site. ... MIGR-67226
Try hitting Fn+F8 to see if the touchpad is disabled. Also check the BIOS.
http://www-307.ibm.com/pc/support/site. ... MIGR-66898
http://www-307.ibm.com/pc/support/site. ... MIGR-67226
Try hitting Fn+F8 to see if the touchpad is disabled. Also check the BIOS.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen & MB168B+
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen
Re: I just got the Lenovo T410 but my touchpad doesn't work...
Yeah I installed both. I hit Fn+F8 and it says I need to go into BIOS to enable it. I ended up going into BIOS mouse section and it didn't give me an option to turn it on or off. Not sure what else I can do.Colonel O'Neill wrote:Did you try these?
http://www-307.ibm.com/pc/support/site. ... MIGR-66898
http://www-307.ibm.com/pc/support/site. ... MIGR-67226
Try hitting Fn+F8 to see if the touchpad is disabled. Also check the BIOS.
-
Colonel O'Neill
- ThinkPadder

- Posts: 1359
- Joined: Tue Oct 27, 2009 8:03 am
- Location: Vancouver
Re: I just got the Lenovo T410 but my touchpad doesn't work...
It should be under Config > Keyboard/Mouse
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen & MB168B+
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen
Re: I just got the Lenovo T410 but my touchpad doesn't work...
Yeah that's where I went...could there be anything else?Colonel O'Neill wrote:It should be under Config > Keyboard/Mouse
Re: I just got the Lenovo T410 but my touchpad doesn't work...
Boot up a Linux Live Cd. Does the touchpad work now?
http://www.linuxmint.com/download.php
http://www.linuxmint.com/download.php
Re: I just got the Lenovo T410 but my touchpad doesn't work...
hello,
my t410 is out of warranty for few weeks and yesterday i was not able to work with it normally, as the touchpad buttons (both below and above) were not responding.
an hour before that i was connected to this t410 via rdp from work and everything was working (with mouse attached to another computer).
i do not have here mouse to test.
when i choose 'swicth primary and secondary buttons' in mouse properties i'm able to do click with right button and left is still dead.
i also uninstalled all the ultranav driver/software - nothing.
i booted knoppix and there it was painting rectangle, like if the left button was still pressed.
in windows it does not paint anything.
touchpad itself works (i can move the arrow), but clicking to touchpad = nothing.
keyboard works (i can type) altough sometimes strangely, but this could be related to the broken button?
i was just able to disconnect the keyboard flex cable - issue persisted.
can i suppose now the problem is with button below touchpad and a replacement for this
http://www.ebay.com/itm/New-Lenovo-Thin ... 2a21c77581
should solve my t410 problem?
ps i was not able to disconnect the cable from touchpad/buttons below it to test, because i cannot see them.
thanks
my t410 is out of warranty for few weeks and yesterday i was not able to work with it normally, as the touchpad buttons (both below and above) were not responding.
an hour before that i was connected to this t410 via rdp from work and everything was working (with mouse attached to another computer).
i do not have here mouse to test.
when i choose 'swicth primary and secondary buttons' in mouse properties i'm able to do click with right button and left is still dead.
i also uninstalled all the ultranav driver/software - nothing.
i booted knoppix and there it was painting rectangle, like if the left button was still pressed.
in windows it does not paint anything.
touchpad itself works (i can move the arrow), but clicking to touchpad = nothing.
keyboard works (i can type) altough sometimes strangely, but this could be related to the broken button?
i was just able to disconnect the keyboard flex cable - issue persisted.
can i suppose now the problem is with button below touchpad and a replacement for this
http://www.ebay.com/itm/New-Lenovo-Thin ... 2a21c77581
should solve my t410 problem?
ps i was not able to disconnect the cable from touchpad/buttons below it to test, because i cannot see them.
thanks
-
- Similar Topics
- Replies
- Views
- Last post
-
-
yikes! Just got a thinkpad 365xd
by zakkzapp » Mon Jan 09, 2017 1:36 am » in ThinkPad Legacy Hardware - 3 Replies
- 1183 Views
-
Last post by zakkzapp
Mon Jan 09, 2017 12:57 pm
-
-
-
Just got a T400 with bad backlight
by Unknown_K » Fri Jan 20, 2017 7:16 am » in ThinkPad T400/410/420 and T500/510/520 Series - 9 Replies
- 1269 Views
-
Last post by Unknown_K
Wed Jan 25, 2017 3:26 pm
-
-
-
Just got a T60p SXGA+ 14" on the cheap
by agarza » Tue Apr 18, 2017 6:12 pm » in ThinkPad T6x Series - 1 Replies
- 740 Views
-
Last post by axur-delmeria
Tue Apr 18, 2017 10:24 pm
-
-
-
Undervolting CPU in Windows 8 / 10 ? RMclock doesn't work any more.
by zoltan87 » Fri Feb 17, 2017 10:26 am » in ThinkPad T6x Series - 6 Replies
- 2489 Views
-
Last post by lab
Sat Mar 18, 2017 11:55 am
-
Who is online
Users browsing this forum: No registered users and 5 guests




