Page 1 of 1
SL500 2746P7G
Posted: Fri Nov 12, 2010 8:33 am
by shaiang
Hi everybody.
Im new at this forum,and i have a thinkpad
SL500 2746P7G
My question's are about the memory.
1.I would like to know how many memory slots thre is?
2.How do i replace it?(i have exprience with computer's)
3.Can i use DDR3 memory,or only DDR2?
Thank's.

Re: SL500 2746P7G
Posted: Fri Nov 12, 2010 11:58 am
by rkawakami
Welcome to thinkpads.com!
Details about
current SL Thinkpad systems can be found here:
http://www.lenovo.com/psref/pdf/slbook.pdf
The SL500 is now considered a
withdrawn system and therefore can be found here:
http://www.lenovo.com/psref/pdf/lslwbook.pdf
The SL500 takes only DDR2 PC2-5300 (or faster) modules. There are two slots available. You can find instructions on how to remove/replace them here:
http://www-307.ibm.com/pc/support/site. ... 69929.html (Hardware Maintenance Manual)
Re: SL500 2746P7G
Posted: Fri Nov 12, 2010 12:01 pm
by shaiang
Thank you. very much.
What do you mean faster?
on
The SL500 takes only DDR2 PC2-5300 (or faster) modules
10x
Re: SL500 2746P7G
Posted: Fri Nov 12, 2010 12:09 pm
by rkawakami
Generally you can install "faster" RAM into a Thinkpad but the laptop will not increase the system speed to take advantage of the module's capability. As long as you stick with PC2-5300 and don't put in slower (i.e., PC2-4200) memory, you will be fine.
Re: SL500 2746P7G
Posted: Fri Nov 12, 2010 12:10 pm
by shaiang
Thank's man!
