Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
Does the W520 run DDR3L Memory at 1.35V?
Does the W520 run DDR3L Memory at 1.35V?
I know DDR3L memory will still run at 1.5V, but I want to know if the W520 actually supports running low voltage memory at 1.35 volts.
Thanks,
Carthik
Thanks,
Carthik
ThinkPad W520
i7-2960XM CPU
32GB Corsair Vengeance RAM
1TB Samsung 850 EVO mSATA SSD
2TB Samsung 860 EVO SSD
1920x1080 FHD LCD
5.2Ah 6-Cell 70+ Battery
Windows 7 Ultimate 64 Bit
i7-2960XM CPU
32GB Corsair Vengeance RAM
1TB Samsung 850 EVO mSATA SSD
2TB Samsung 860 EVO SSD
1920x1080 FHD LCD
5.2Ah 6-Cell 70+ Battery
Windows 7 Ultimate 64 Bit
-
- Senior Member
- Posts: 817
- Joined: Fri Oct 17, 2014 8:13 pm
- Location: kingston, ontario, Canada
Re: Does the W520 run DDR3L Memory at 1.35V?
Be aware that DDR3L is 1.35V running on 1.5 makes chips run more warmer. Also getting 1.5V only sodimms are best thing to do.
Also matched sets are another proper manner to do.
Cheers, thinkpadcollection
Also matched sets are another proper manner to do.
Cheers, thinkpadcollection
Re: Does the W520 run DDR3L Memory at 1.35V?
Still no answer to my question, anyone?
ThinkPad W520
i7-2960XM CPU
32GB Corsair Vengeance RAM
1TB Samsung 850 EVO mSATA SSD
2TB Samsung 860 EVO SSD
1920x1080 FHD LCD
5.2Ah 6-Cell 70+ Battery
Windows 7 Ultimate 64 Bit
i7-2960XM CPU
32GB Corsair Vengeance RAM
1TB Samsung 850 EVO mSATA SSD
2TB Samsung 860 EVO SSD
1920x1080 FHD LCD
5.2Ah 6-Cell 70+ Battery
Windows 7 Ultimate 64 Bit
-
- Junior Member
- Posts: 445
- Joined: Wed May 16, 2012 3:36 pm
- Location: Salinas, CA
Re: Does the W520 run DDR3L Memory at 1.35V?
I seem to recall that you need Ivy Bridge or later to run DDR3L at 1.35V.
If you look on ark.intel.com for your processor, you'll see the recommended memory type listed.
e.g., for an ivy bridge you'll probably see something like "DDR3/L/-RS 1333/1600" as the recommended
memory type, whereas for a Sandy Bridge you'll probably see "DDR3 1066/1333."
If you look on ark.intel.com for your processor, you'll see the recommended memory type listed.
e.g., for an ivy bridge you'll probably see something like "DDR3/L/-RS 1333/1600" as the recommended
memory type, whereas for a Sandy Bridge you'll probably see "DDR3 1066/1333."
Daily Drivers: W520 i7-2760QM | W520 i7-2860QM | T420 FHD IPS i7-2640m | W701
Others: W510 | 701C (on its shrine)
Non-TP: Dell m7510
Currently Experimenting With: T420s
Others: W510 | 701C (on its shrine)
Non-TP: Dell m7510
Currently Experimenting With: T420s
-
- Senior Member
- Posts: 754
- Joined: Tue Jun 26, 2007 8:42 pm
- Location: Amsterdam, The Netherlands
Re: Does the W520 run DDR3L Memory at 1.35V?
My W520 is working fine with two sticks of 8GB Crucial 1.35V memory. Crucial specifically claims it works with both 1.5 and 1.35. No idea if it runs hotter or not.
A friend bought two sticks of 4 GB of the same for a T400, but that didn't work out. The memory itself worked though, just not in the T400.
CPU-Z reports that it runs at 9-9-9-24, which happens to be equal to what's in the SPD Table for 685 MHz. A lot of RAM has much lousier timings in the SPD than what they advertise it with, but not this Crucial set. The 800 MHz SPD slot is the advertised cl. 11
No idea on the voltage though, CPU-Z can't report current voltage. All the SPD slots have 1.35V though.
A friend bought two sticks of 4 GB of the same for a T400, but that didn't work out. The memory itself worked though, just not in the T400.
CPU-Z reports that it runs at 9-9-9-24, which happens to be equal to what's in the SPD Table for 685 MHz. A lot of RAM has much lousier timings in the SPD than what they advertise it with, but not this Crucial set. The 800 MHz SPD slot is the advertised cl. 11
No idea on the voltage though, CPU-Z can't report current voltage. All the SPD slots have 1.35V though.
W520
T61
T61
-
- Freshman Member
- Posts: 56
- Joined: Sat Nov 08, 2014 8:47 am
- Location: Borricón de Arriba, Spain
Re: Does the W520 run DDR3L Memory at 1.35V?
Hi, my X220 (same generation and chipset) runs fine with 16Gb Kingston hyperX DDR3-L
X220 IPS, i7 16Gb RAM 250Gb SSD+2Tb HD
X61 T8100, 8Gb RAM, Middleton BIOS, 480 Gb SSD, sxga+
W520 i7 quad, FHD, 32Gb, 512 SSD+2Tb HD
W701 24Gb RAM, WUXGA, 240 Gb SSD+1Tb HD,
others
X61t, X200t, W500, T43p UXGA, R50p UXGA, T60p UXGA
600, X21, X24, X30, X41, A30p UXGA
Re: Does the W520 run DDR3L Memory at 1.35V?
I, too, would be interested in this information. I've done a bit of web searching, but so far to no avail...
-
- Freshman Member
- Posts: 56
- Joined: Sat Nov 08, 2014 8:47 am
- Location: Borricón de Arriba, Spain
Re: Does the W520 run DDR3L Memory at 1.35V?
Here another one who has DDR3L both in W520 and in X220. 32Gb in my W520 and 16Gb in my X220.
By error (I've ordered one memory type and received another, but I didn't noticed it), my W520 was running for some months with mixed memory, two slots DDR3 and two DDR3L at the same time. It ran flawlessly and stable, and I only noticed it when I upgraded to 32Gb.
By error (I've ordered one memory type and received another, but I didn't noticed it), my W520 was running for some months with mixed memory, two slots DDR3 and two DDR3L at the same time. It ran flawlessly and stable, and I only noticed it when I upgraded to 32Gb.
X220 IPS, i7 16Gb RAM 250Gb SSD+2Tb HD
X61 T8100, 8Gb RAM, Middleton BIOS, 480 Gb SSD, sxga+
W520 i7 quad, FHD, 32Gb, 512 SSD+2Tb HD
W701 24Gb RAM, WUXGA, 240 Gb SSD+1Tb HD,
others
X61t, X200t, W500, T43p UXGA, R50p UXGA, T60p UXGA
600, X21, X24, X30, X41, A30p UXGA
Re: Does the W520 run DDR3L Memory at 1.35V?
Just tried to run 4 x 8GB GSkill DD3L modules in my W520. Initially all seemed well, but the modules got really hot and the machine starting crashing. Memtest showed plenty of errors.
Timing was CL10 at 1600mhz. I'm running coreboot though, with an IvyBridge CPU, and apparently there are some issues with raminit still. Modules were definitely getting hot though.
@CPC464 what brand and model of RAM do you use? Do you know what speed they run at?
Timing was CL10 at 1600mhz. I'm running coreboot though, with an IvyBridge CPU, and apparently there are some issues with raminit still. Modules were definitely getting hot though.
@CPC464 what brand and model of RAM do you use? Do you know what speed they run at?
-
- Senior Member
- Posts: 817
- Joined: Fri Oct 17, 2014 8:13 pm
- Location: kingston, ontario, Canada
Re: Does the W520 run DDR3L Memory at 1.35V?
W520 is sandy bridge and ivy bridge CPUs in W530 still utilize 1.5V ram modules. Any speed DDR3-1333 to 1600 is fine except Ivy bridge requires 1600 or 1866.
Buy from ebay: Micron (Crucial), Hynix, Samsung, Elpida or order from Cruical. Third party memory are a issue sometimes.
Cheers, thinkpadcollection
Buy from ebay: Micron (Crucial), Hynix, Samsung, Elpida or order from Cruical. Third party memory are a issue sometimes.
Cheers, thinkpadcollection
-
- Senior ThinkPadder
- Posts: 2508
- Joined: Tue Sep 22, 2015 10:59 pm
- Location: Toronto, Canada
Re: Does the W520 run DDR3L Memory at 1.35V?
I have my T530 with 2x8GB Kingston HyperX set (it was cheaper than normal DDR3 for some reason) and it runs just fine even after me trying that laptop with both Sandy Bridge (i5-2520m) and Ivy Bridge (i7-3720qm) CPU
Dell Lat CP MMX-233 64mb 40gb W2k
600 PII-266 416mb 40gb WXP
T23 PIII 1.13ghz 1gb W7
Precision M4300 X9000 8gb 160gb WUXGA Ultrasharp fp W10
T530i 15.6" i7 16gb fp W10
UXGA:
A30p PIII 1.2 1gb W7 (IDTech)
T43p 2.26 2gb fp W10 (Sharp)
Lat C840 P4-2.5 2gb 60gb W7 (Ultrasharp)
600 PII-266 416mb 40gb WXP
T23 PIII 1.13ghz 1gb W7
Precision M4300 X9000 8gb 160gb WUXGA Ultrasharp fp W10
T530i 15.6" i7 16gb fp W10
UXGA:
A30p PIII 1.2 1gb W7 (IDTech)
T43p 2.26 2gb fp W10 (Sharp)
Lat C840 P4-2.5 2gb 60gb W7 (Ultrasharp)
Re: Does the W520 run DDR3L Memory at 1.35V?
@thinkpadcollection
I'm aware of W520/W530 CPUs, with coreboot you can run IVB CPUs in a W520 just fine though. My ram is running @1333 right now, so 1600 is not requiered for IVB.
The W520 (and possible W530, not sure) could provide 1.35V for DDR3L with a resistor mod, nobody has tried yet though.
If possible, I'd rather wait for modules confirmed working.
Thanks for your suggestions though.
I'm aware of W520/W530 CPUs, with coreboot you can run IVB CPUs in a W520 just fine though. My ram is running @1333 right now, so 1600 is not requiered for IVB.
The W520 (and possible W530, not sure) could provide 1.35V for DDR3L with a resistor mod, nobody has tried yet though.
If possible, I'd rather wait for modules confirmed working.
Thanks for your suggestions though.
-
- Posts: 21
- Joined: Sat Jul 23, 2016 7:38 am
- Location: London, England, UK
Re: Does the W520 run DDR3L Memory at 1.35V?
I've successfully ran 32GB of Kingston HyperX Impact 8GB 1600 MHz DDR3L CL9 memory (https://www.amazon.com/hyperx-impact-so ... B00KQCOTCM) without issue at 1600MT/s with v1.36 BIOS.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
W520 does not finish shutting down correctly
by crux » Fri Dec 01, 2023 6:43 pm » in ThinkPad W500/W510/W520 and W700/W701 Series - 1 Replies
- 4101 Views
-
Last post by axur-delmeria
Sat Dec 02, 2023 12:41 am
-
-
-
Which models is W520's 170W AC adapter compatible with if keying removed?
by neilthinkpads » Fri Oct 27, 2023 12:25 pm » in ThinkPad T400/T410/T420 and T500/T510/T520 Series - 4 Replies
- 3141 Views
-
Last post by kfzhu1229
Sat Oct 28, 2023 2:55 pm
-
-
-
W520 w/ Mini Dock Plus Series 3 wattage error
by NoPyro » Tue Nov 28, 2023 4:34 pm » in ThinkPad W500/W510/W520 and W700/W701 Series - 7 Replies
- 2181 Views
-
Last post by dr_st
Fri Dec 01, 2023 5:31 pm
-
-
-
2 questions, RAM upgrade and OS downgrade on a W520
by NoPyro » Sat Dec 02, 2023 1:55 pm » in ThinkPad W500/W510/W520 and W700/W701 Series - 9 Replies
- 7409 Views
-
Last post by mikemex
Thu Feb 22, 2024 1:47 am
-
Who is online
Users browsing this forum: No registered users and 10 guests