[W701] SD -Card Reader --> 32GB SDHC (Verbatim) Card fails

[chrisaix]

Hi all,
perhaps some others had the same problems and can help...

The build in Ricoh Multi-Card reader (within W701)
* doesn't read Verbatim SDHC 32 GB Class 6 Card
* but accepts a Transcend SDHC 16GB Card
by using Windows 7/64

And now the crazy thing:
With Ubuntu 10.04, Desktop, 64bit (live CD) all works fine aut of the box!

Any hint for bringing it to work within Windows 7 / 64 ?
I'm using the latest driver by Lenovo.

Thanks in advance
// Chris


--------------
lspci -vv -k -D shows the following

Code: Select all

0000:02:00.0 SD Host controller: Ricoh Co Ltd Device e822 (rev 01)
	Subsystem: Lenovo Device 2133
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f5f00800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci-pci

0000:0d:00.0 SD Host controller: Ricoh Co Ltd Device e822 (rev 01)
	Subsystem: Lenovo Device 2133
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f6100000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci-pci

0000:0d:00.1 System peripheral: Ricoh Co Ltd Device e230 (rev 01)
	Subsystem: Lenovo Device 2134
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at f6100400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>

[Marin85]

Check this, then this, and then maybe this

Hope this helps,

Marin

[chrisaix]

Check this, then this, and then maybe this

Hope this helps,

Marin

The hotfilx (http://support.microsoft.com/kb/976422) was already installed - but I re-installed it.

NO change - the Card works fine with an external usb CardReader (HAMA USB 2.0 Card Reader 35 in 1 [V3]) and within my w500 (WinXP 32, SP3) but with the W701 build in CardReader Windoze says that it wants to reformat it ... but this will not help at all.

So I think it's a Windows / Lenovo issue ... especially it works on Ubuntu 10.04 Live-CD out of the box.

Any more suggestions?