Help with W700 cpu & expresscard upgrades.
Posted: Tue Jan 18, 2011 2:42 pm
Hi all - I'm thinking about upgrading a W700 cpu(to either an X9100 or QX9300) and swapping out the combo ExpressCard/CF ports with an ExpressCard/ExpressCard port card, so that I can have two ExpressCard slots. Evidently the two slots are on one unit, so to add a second ExpressCard slot means swapping out the entire port/slot unit.
I've built my own desktops/towers in the 1980s/90s, but switched to Thinkpads ~10 years ago and haven't looked back. However, I don't have much experience tinkering w/Thinkpads...
So, anyone out there who's cracked open a W700 and could clue me in as to whether I'm looking at trouble or would it be fairly easy to do? While I'm in there, I'd clean out dirt/dust, but is there anything else I should do while it's open?
All I know at this point is that I'd probably want to re-goop the thermal paste, righto? Other than that, is access & replacement easy or a real pain??
Thanks...
I've built my own desktops/towers in the 1980s/90s, but switched to Thinkpads ~10 years ago and haven't looked back. However, I don't have much experience tinkering w/Thinkpads...
So, anyone out there who's cracked open a W700 and could clue me in as to whether I'm looking at trouble or would it be fairly easy to do? While I'm in there, I'd clean out dirt/dust, but is there anything else I should do while it's open?
All I know at this point is that I'd probably want to re-goop the thermal paste, righto? Other than that, is access & replacement easy or a real pain??
Thanks...