Integrated camera and USB problems
Posted: Thu Sep 22, 2011 9:36 am
An unusual combination I know. Here is what I have. I am hoping someone can help me out.
W500--- When I lift or move the T/P and touch the screen/lid at all while moving it, I get errors for USB ports and sometimes the camera comes on.
The USB message is about using different ports for better performance.
Is it possible that a semi loose lid/screen would cause this? The lid has a little play on the left side facing the screen on the larger of the 2 hinges.
I am reluctant to take everything apart if that is not a possible solution.
Any help would be appreciate.
W500--- When I lift or move the T/P and touch the screen/lid at all while moving it, I get errors for USB ports and sometimes the camera comes on.
The USB message is about using different ports for better performance.
Is it possible that a semi loose lid/screen would cause this? The lid has a little play on the left side facing the screen on the larger of the 2 hinges.
I am reluctant to take everything apart if that is not a possible solution.
Any help would be appreciate.