DVD problems?

Message

a31pguy · #1 Post by **a31pguy** » Fri May 06, 2005 2:23 pm

I have the M a t s u s h i t a UJ-810b multiburner ultrabay 2000 drive (but the drive label says panasonic industrial - korea?) and I have always had problems writing to DVD-Rs. The drive works wonders with CD-R and CD-RW but I have not been able to burn even one DVD-R. It fails in both ROXIO classic creator and IBM Record now.

IBM Record now gives:

Disc Read Error - Sense:03 ASC:73 ASCQ:03 (Command:2A)
--------------------------------------------------
Matshita DVD-RAM UJ-810 (E:) ATAPI (C104)
PX.DLL - 1.6.14.507
PXMAS.DLL - 1.6.14.507
PXWAVE.DLL - 1.6.14.507
OLEAUT32.DLL - 5.1.2600.2180
MSVBVM60.DLL - 6.0.97.82
MSCOMCTL.OCX - 6.1.95.45
MSCOMCT2.OCX - 6.0.88.4
PXHelp20.SYS - 2.2.62.0

and Roxio gives:

E80041882: Disc error - power calibration area error - [03/73/03]
E80041934: TrackWriter error - Flush failed - [T7127]
E80041925: TrackWriter error - Command retry failed - [T7118]

any ideas? Firmware problem?

slagmi · #2 Post by **slagmi** » Fri May 06, 2005 2:55 pm

Sounds like a bad drive to me, tho you've nothing to lose by seeking the latest firmware and trying a couple of different brands of media. But my money's on bad drive.

MadeInJapan · #3 Post by **MadeInJapan** » Fri May 06, 2005 5:52 pm

You can see if any of these firmwares are compatible and if they will help your DVD burner out.
http://forum.rpc1.org/dl_firmware.php?download_id=1448

a31pguy · #4 Post by **a31pguy** » Tue May 10, 2005 6:58 pm

It seemed the IBM DLA software was the problem. Removed DLA and the drive burns DVD-Rs perfectly.

slagmi · #5 Post by **slagmi** » Thu May 12, 2005 8:29 am

That's interesting thanks for posting
I guess if I stop and think about it the same laser is used for writing both

DVD problems?

DVD problems?

Problem resolved.

Who is online