A20m: Netgear card not working with Win98

R, A, G and Z series specific matters only
Post Reply
Message
Author
Dos3.1
Freshman Member
Posts: 91
Joined: Wed Jun 26, 2013 4:55 pm
Location: Toronto, Ontario, Canada

A20m: Netgear card not working with Win98

#1 Post by Dos3.1 » Wed Jun 26, 2013 5:49 pm

Hello,

I'm new to this forum, so thank you, Bill! Great site!

I recently came into my 2nd A20m (for free) in great condition! My first A20m is still working well (though at times it tends to hang and the HD races, not sure why - any ideas?), had it a few years now (this is a great, solid, and tough model, but has dang loud hard drives for some reason! Both of the ones I have sound just the same!)

The Netgear wireless card I have works fine with the 1st A20m, running Win2000. I put Win98 on the 2nd A20m (I don't have the Win2000 install CD) and the card will not work. I even have the Netgear install CD, but no dice.

I tried puppy linux (wary) on the 2nd A20m and it got on the wireless network with the Netgear card. I tried to install that OS but it would not recognize the hard drive.

Any suggestions as to:

1) How I can get the Netgear card working under Win98?
2) Why my 1st A20m sometimes hangs?


Thanks!

-Typing this on a T60 running Linux Mint-
...typed on a T60...

Neil
Senior ThinkPadder
Senior ThinkPadder
Posts: 2914
Joined: Sun Aug 07, 2005 5:41 pm
Location: Paragould AR USA

Re: A20m: Netgear card not working with Win98

#2 Post by Neil » Thu Jun 27, 2013 7:17 am

1) What model Netgear card is this? Very likely there are no drivers for this card that support Win98.

2) Likely a combination of low RAM, an old, slow HDD that is now lacking sufficient free space for virtual memory. Or some other affects of an aging HDD.
Collection = T500 - R400 - X300 - X200 - T61 (14" WXGA+) - T61 (14.1" SXGA+) - T60 (15" SXGA+) - X40 - T43p - T43 - T42p - A30P - 600E

Dos3.1
Freshman Member
Posts: 91
Joined: Wed Jun 26, 2013 4:55 pm
Location: Toronto, Ontario, Canada

Re: A20m: Netgear card not working with Win98

#3 Post by Dos3.1 » Thu Jun 27, 2013 1:50 pm

Neil wrote:1) What model Netgear card is this? Very likely there are no drivers for this card that support Win98.

2) Likely a combination of low RAM, an old, slow HDD that is now lacking sufficient free space for virtual memory. Or some other affects of an aging HDD.
Thanks..good point. Netgear WG511. The manual only mentions from Win98SE...so probably out of luck for 98.
...typed on a T60...

Dos3.1
Freshman Member
Posts: 91
Joined: Wed Jun 26, 2013 4:55 pm
Location: Toronto, Ontario, Canada

Re: A20m: Netgear card not working with Win98

#4 Post by Dos3.1 » Sat Jun 29, 2013 11:53 am

Dos3.1 wrote:Someone said: Welcome to the world of poorly documented hardware. To help us help you, please provide more detail. What version? And, what OUI?

OUI is first three octets of MAC address, for example, observe in the following photo, OUI is 00184d.

http://wikidevi.com/wiki/File:NETGEAR_WG511v2_bot.jpg
Thanks, I'll look into it and add it under here.
...typed on a T60...

Dos3.1
Freshman Member
Posts: 91
Joined: Wed Jun 26, 2013 4:55 pm
Location: Toronto, Ontario, Canada

Re: A20m: Netgear card not working with Win98

#5 Post by Dos3.1 » Tue Jul 16, 2013 1:49 pm

Dos3.1 wrote:
Dos3.1 wrote:Someone said: Welcome to the world of poorly documented hardware. To help us help you, please provide more detail. What version? And, what OUI?

OUI is first three octets of MAC address, for example, observe in the following photo, OUI is 00184d.

http://wikidevi.com/wiki/File:NETGEAR_WG511v2_bot.jpg
Thanks, I'll look into it and add it under here.
No version number.

OUI is: 00095B
...typed on a T60...

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad R, A, G and Z Series”

Who is online

Users browsing this forum: No registered users and 5 guests