R52 with SATA-Mod, SSD and Error 200 Fixed Disk Failure 7
R52 with SATA-Mod, SSD and Error 200 Fixed Disk Failure 7
Hi everybody,
I had a SATA-Mod done to my R52 (1846-4CG) and tried to install a Samsung 840 Pro SSD. Unfortunately, this was only partly succesful. Sometimes the system boots, I could even install Windows 7. But quite a few times "Error 200 Fixed Disk Failure 7" shows up when I start the R52. I also installed a "normal" SATA HDD - the R52 booted without any problems, no Error 200.
Does anybody know why Error 200 shows up with the SSD? Is this a compatibility issue, can only certain SSDs be used with a 82801FB?
Thanks for your help!
Tim
I had a SATA-Mod done to my R52 (1846-4CG) and tried to install a Samsung 840 Pro SSD. Unfortunately, this was only partly succesful. Sometimes the system boots, I could even install Windows 7. But quite a few times "Error 200 Fixed Disk Failure 7" shows up when I start the R52. I also installed a "normal" SATA HDD - the R52 booted without any problems, no Error 200.
Does anybody know why Error 200 shows up with the SSD? Is this a compatibility issue, can only certain SSDs be used with a 82801FB?
Thanks for your help!
Tim
-
ajkula66
- SuperUserGeorge

- Posts: 15733
- Joined: Sun Feb 25, 2007 11:28 am
- Location: Brodheadsville, Pennsylvania
Re: R52 with SATA-Mod, SSD and Error 200 Fixed Disk Failure 7
Welcome to the forum!
Certain SSDs do not play nice with these SATA-modded units. I couldn't install any OS on OCZ Vertex 2 which works flawlessly in T410.
I've used Crucial C300 with no issues and currently have Intel X25-E in my modded T43p.
Hope this helps.
Certain SSDs do not play nice with these SATA-modded units. I couldn't install any OS on OCZ Vertex 2 which works flawlessly in T410.
I've used Crucial C300 with no issues and currently have Intel X25-E in my modded T43p.
Hope this helps.
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: R61
PMs requesting personal tech support will be ignored.
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: R61
PMs requesting personal tech support will be ignored.
-
RealBlackStuff
- Admin
- Posts: 17488
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Mt. Cobb, PA USA
- Contact:
Re: R52 with SATA-Mod, SSD and Error 200 Fixed Disk Failure 7
Any SATA-modded T43/T43p/R52 will have Error 200 if booted without a (or with a bad) SATA drive in the HD bay.
Like George mentioned, OCZ (and Kingston) SSDs are bad news.
It's also quite possible that any newer SSD or HD with SATA III speed does not "go back" far enough to support the only SATA I capable 82801FB chip.
Get an 'older' SATA I or SATA II drive.
Like George mentioned, OCZ (and Kingston) SSDs are bad news.
It's also quite possible that any newer SSD or HD with SATA III speed does not "go back" far enough to support the only SATA I capable 82801FB chip.
Get an 'older' SATA I or SATA II drive.
Lovely day for a Guinness! (The Real Black Stuff)
Check out The Boardroom for Parts, Mods and Other Services.
Check out The Boardroom for Parts, Mods and Other Services.
Re: R52 with SATA-Mod, SSD and Error 200 Fixed Disk Failure 7
Thanks for your replies - that helps!!
-
thinkpadr52
- Posts: 5
- Joined: Sat Jul 28, 2012 10:31 am
- Location: Florence, Italy
Re: R52 with SATA-Mod, SSD and Error 200 Fixed Disk Failure 7
I recently installed in the SATA Ultrabay a Fujitsu hard disk SATA MHW2160BH (160GB as you can tell) and removed from the HD bay the original one.
All systems go perfectly.
Now I would like to substitute Fujitsu hd with a Samsung SSD SATA (840 series MZ-7TD120BW, 120GB).
Is there any known issue with that?
All systems go perfectly.
Now I would like to substitute Fujitsu hd with a Samsung SSD SATA (840 series MZ-7TD120BW, 120GB).
Is there any known issue with that?
Re: R52 with SATA-Mod, SSD and Error 200 Fixed Disk Failure 7
I am currently running an T43p with SATA Mod by RBS with an Samsung 830 SSD.
HTH
HTH
Lophiomys
Thinkpads with 15inch 4:3 UXGA 133DPI IPS/Flexview: 2x T43p SATA Mod., 3x T42p (dying by Flexing), 2x T60p (1xATI, 1xIntel/new BoeHydis);
R51 SXGA+; X31; X41T; X41 Sata Mod; all Made in China; 570E, 701C; MBP15c3UB non-glossy mid09 / formerly 600X, 760E
Thinkpads with 15inch 4:3 UXGA 133DPI IPS/Flexview: 2x T43p SATA Mod., 3x T42p (dying by Flexing), 2x T60p (1xATI, 1xIntel/new BoeHydis);
R51 SXGA+; X31; X41T; X41 Sata Mod; all Made in China; 570E, 701C; MBP15c3UB non-glossy mid09 / formerly 600X, 760E
-
thinkpadr52
- Posts: 5
- Joined: Sat Jul 28, 2012 10:31 am
- Location: Florence, Italy
Re: R52 with SATA-Mod, SSD and Error 200 Fixed Disk Failure 7
I thank you lophiomys (a kind of mouse...) but I don't want to do any modification.
I just want to put in the R52's Ultrabay an SSD Samsung SATA instead of Fujitsu hard disk SATA
who's getting a little warmer (sometimes 46°C or 46/5*9+32= 115F).
I've just read this thread http://forum.thinkpads.com/viewtopic.php?f=2&t=94452
but I didn't understand whether T42's Ultrabay is Sata or Pata.
I just want to put in the R52's Ultrabay an SSD Samsung SATA instead of Fujitsu hard disk SATA
who's getting a little warmer (sometimes 46°C or 46/5*9+32= 115F).
I've just read this thread http://forum.thinkpads.com/viewtopic.php?f=2&t=94452
but I didn't understand whether T42's Ultrabay is Sata or Pata.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
SSD PCIe, M-sata and T400 + T500
by KingBubba » Sat Apr 29, 2017 1:53 pm » in ThinkPad T400/410/420 and T500/510/520 Series - 15 Replies
- 1015 Views
-
Last post by jronald
Sat Jun 03, 2017 4:23 pm
-
-
-
It seems as Lenovo finally noticed and fixed the low PWM frequency issue
by Puppy » Sun Apr 16, 2017 6:28 am » in GENERAL ThinkPad News/Comments & Questions - 2 Replies
- 502 Views
-
Last post by Thinkpad4by3
Sun May 14, 2017 9:07 pm
-
-
-
SOLD!: Plextor M6 Pro 2.5" 256GB SATA III MLC SSD, barely used
by ajkula66 » Sun Apr 30, 2017 8:35 am » in Marketplace - Forum Members only - 1 Replies
- 260 Views
-
Last post by ajkula66
Mon May 15, 2017 9:08 pm
-
-
- 0 Replies
- 287 Views
-
Last post by BobA
Sun Mar 26, 2017 10:13 pm
Who is online
Users browsing this forum: No registered users and 1 guest




