is there a program that can perform such actions? i have tried IBM_ECW, TPFanControl and Notebook Hardware Control, but all they do is report odd temperatures like 17-19C and give me no options to control the fan (i'm pretty sure they were reading some other parts of the embedded controller).
this is rather annoying, as i have shoved in a Mobile Intel Pentium 4 2.3GHz (SL789) for more speed, but in turn generates loads of heat! which is why i desperately require a program that can control the fan, temperature monitoring is irrelevant as i have managed to read from 2 thermal zones.
and if you were wondering how i've gotten that processor to work, i had to delid the heat spreader to prevent the heatsink from colliding with it. note that it's operating on a 400MHz bus, explains why, doesn't it?
Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
fan control for the R32
-
- Posts: 13
- Joined: Thu Sep 22, 2016 3:40 am
- Location: Singapore
-
- Senior ThinkPadder
- Posts: 2484
- Joined: Tue Sep 22, 2015 10:59 pm
- Location: Toronto, Canada
Re: fan control for the R32
Unfortunately you are landing on no man's land. Your CPU has a much higher TDP (somewhere in 50-60W) compared to 35W. It is Mobile Pentium 4, not Mobile Pentium 4 - M. The stock CPU does not have the heat spreader. Use your original CPU because higher than supported TDP also means more risk to burn your motherboard
FYI, non Pentium 4 - M P4 DOES NOT have a temp reading, it is only able to throttle or freeze your computer if it gets too hot
FYI, non Pentium 4 - M P4 DOES NOT have a temp reading, it is only able to throttle or freeze your computer if it gets too hot
Dell Lat CP MMX-233 64mb 40gb W2k
600 PII-266 416mb 40gb WXP
T23 PIII 1.13ghz 1gb W7
Precision M4300 X9000 8gb 160gb WUXGA Ultrasharp fp W10
T530i 15.6" i7 16gb fp W10
UXGA:
A30p PIII 1.2 1gb W7 (IDTech)
T43p 2.26 2gb fp W10 (Sharp)
Lat C840 P4-2.5 2gb 60gb W7 (Ultrasharp)
600 PII-266 416mb 40gb WXP
T23 PIII 1.13ghz 1gb W7
Precision M4300 X9000 8gb 160gb WUXGA Ultrasharp fp W10
T530i 15.6" i7 16gb fp W10
UXGA:
A30p PIII 1.2 1gb W7 (IDTech)
T43p 2.26 2gb fp W10 (Sharp)
Lat C840 P4-2.5 2gb 60gb W7 (Ultrasharp)
-
- Posts: 13
- Joined: Thu Sep 22, 2016 3:40 am
- Location: Singapore
Re: fan control for the R32
non Mobile Pentium 4 - Ms have no temperature reading, as in it has no core temperature sensor? doesn't every Northwood-based Pentium 4 come with no built-in core temperature sensor, and relies only on the temperature sensors that are placed on the motherboard?kfzhu1229 wrote:Unfortunately you are landing on no man's land. Your CPU has a much higher TDP (somewhere in 50-60W) compared to 35W. It is Mobile Pentium 4, not Mobile Pentium 4 - M. The stock CPU does not have the heat spreader. Use your original CPU because higher than supported TDP also means more risk to burn your motherboard
FYI, non Pentium 4 - M P4 DOES NOT have a temp reading, it is only able to throttle or freeze your computer if it gets too hot
this is a picture of the R32 with the Mobile Intel Pentium 4 2.3GHz's temperatures: http://oi65.tinypic.com/15qcb9u.jpg <= more than 50KB and i don't want to get beat down just because of download restrictions
and may i ask, where did you find such information of the Mobile Intel Pentium 4 2.3GHz's TDP? there is not even a single detail on the internet that shows its power consumption figures, since it was a rebranded Mobile Intel Pentium 4 - M http://ark.intel.com/products/27360/ <speculation> which explains why it is the only odd one out, every Mobile Pentium 4 has a 533MHz FSB, this one has a 400MHz FSB... still no fan control program though.
-
- Senior ThinkPadder
- Posts: 2484
- Joined: Tue Sep 22, 2015 10:59 pm
- Location: Toronto, Canada
Re: fan control for the R32
Whenever you get a head spreader, it means the CPU has the desktop TDP. P4 - M and other low power mobile processors do NOT have heat spreaders at all
Dell Lat CP MMX-233 64mb 40gb W2k
600 PII-266 416mb 40gb WXP
T23 PIII 1.13ghz 1gb W7
Precision M4300 X9000 8gb 160gb WUXGA Ultrasharp fp W10
T530i 15.6" i7 16gb fp W10
UXGA:
A30p PIII 1.2 1gb W7 (IDTech)
T43p 2.26 2gb fp W10 (Sharp)
Lat C840 P4-2.5 2gb 60gb W7 (Ultrasharp)
600 PII-266 416mb 40gb WXP
T23 PIII 1.13ghz 1gb W7
Precision M4300 X9000 8gb 160gb WUXGA Ultrasharp fp W10
T530i 15.6" i7 16gb fp W10
UXGA:
A30p PIII 1.2 1gb W7 (IDTech)
T43p 2.26 2gb fp W10 (Sharp)
Lat C840 P4-2.5 2gb 60gb W7 (Ultrasharp)
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Can I replace my T440p stock fan with a Noctua fan?
by cultOfThinkpad » Wed Jan 10, 2024 2:41 pm » in ThinkPad T430-T490 / T530-T590 Series - 4 Replies
- 1323 Views
-
Last post by keithsketchley
Mon Feb 26, 2024 10:04 am
-
-
-
Does Middleton allow changing Fan Profile?
by euless » Tue Oct 03, 2023 8:17 pm » in ThinkPad T430-T490 / T530-T590 Series - 8 Replies
- 3277 Views
-
Last post by RealBlackStuff
Mon Oct 30, 2023 6:54 am
-
-
-
Unconnected black wire on fan T440P
by euless » Thu Nov 23, 2023 6:22 am » in ThinkPad T430-T490 / T530-T590 Series - 6 Replies
- 1855 Views
-
Last post by euless
Fri Nov 24, 2023 1:48 pm
-
-
-
T4x fan compatibilty.
by Gonzaleitor » Fri Feb 16, 2024 11:19 am » in ThinkPad T40/T41/T42/T43 Series - 0 Replies
- 186 Views
-
Last post by Gonzaleitor
Fri Feb 16, 2024 11:19 am
-
Who is online
Users browsing this forum: Misu and 32 guests