i might be wrong, though. this test was done on a late production R40 (2897-83U, April 2004), so i have a feeling that the even later produced R40s might have a chance to get a Dothan running in them with this microcode update i have done. if anyone still owns a Pentium M R40, please do give it a try! the modded BIOS is provided in the link here: https://leopard.hosting/dl/isusn/FLOP288M.IMG
you will have to do it the MS-DOS way of flashing though, since the checksum is considered invalid (modified). the file has phoenix's phlash16.exe and the R40's modded BIOS, so you can get to flashing as fast as possible once you have burned the image to a CD. don't forget to enable 2.88MB floppy emulation!!
if you can, please also post your results here so other people can get a hold of this knowledge!
- Posts: 1947
- Joined: Mon May 28, 2012 5:49 am
- Location: Metro Manila, Philippines
What's the FSB of the Dothan processor you installed?
Backup: X220 4291-P79 i5-2520M
Toy: X60F Core Solo U1300
In pieces: two retired but working X61Ts
RIP: 760XD 9546-U9E; X61 7676-A24; and a BOE-Hydis HV121P01-100 in failed SXGA+ mod
I wouldn't even LOOK at such a machine, let alone spend time or money on it... YMMV.
wait, what? i thought the R40 was made by LG and not Acer?
according to a certain motherboard schematic, it was produced by LG's PC division and not Wistron which used to be part of Acer (http://notebookschematic.org/published/ ... ON_enl.jpg). the R32 had a schematic that did show it was made by Wistron, and a sticker on a certain chip found on the R32's motherboard that says 'D-Note' (http://notebookschematic.org/published/ ... te_enl.jpg). then somehow the R40 has a sticker found on the bottom housing case that reads 'Made in Korea', which points to LG and not Acer/Wistron?
i'm honestly confused if the R40 was indeed made by Acer and not LG, or is it just me not thinking right?
- Posts: 16291
- Joined: Sun Feb 25, 2007 11:28 am
- Location: Brodheadsville, Pennsylvania, USA
All R-series units prior to R50 were made by Acer. Period, end of story. The DC plug on the "wrong" side of the chassis is a dead giveaway.
George (your grouchy retired FlexView farmer)
AARP club members:A31p,T43pSF
Abused daily: T61p
PMs requesting personal tech support will be ignored.
- Similar Topics
- Last post
Who is online
Users browsing this forum: No registered users and 10 guests