This is my first post, as I have only recently found this very informative forum.
A few weeks ago, I was given a ThinkPad A30 that is apparently dead. More in detail, when I press the power button, nothing happens: no LED turns on, nor there is any fan noise. Given the symptoms, I have disassembled it and I have tried powering it up with a lab bench power supply. By doing so I have noticed that, when I switch on the power supply, the laptop starts absorbing 0.16A, so there is some component that is being powered. Doing further inspections, I have noticed that the power management controller chip, a Maxim MAX1631AEAI, gets quite hot. The same behavior occurs both by powering the laptop through the 16V barrel jack socket, and using the battery terminals (in this case supplying 10.7V). I have read here and in other websites that the A3x line has the infamous mainboard flexing issue, so this issue could also be caused by a short circuit between PCB layers.
That said, I was wondering if anybody else has got an A30 with the same symptoms and (s)he managed to repair the mainboard. If so, is the MAX1631AEAI the faulty chip, or is another defective component/shorted trace that causes that chip to overheat?
Thank you for your attention.
- Similar Topics
- Last post
Who is online
Users browsing this forum: No registered users and 15 guests