An UXGA screen from a R50p/T42p/T43p/T6xp would electrically work, but the connector is not low enough for the A3x cables to reach and I haven't really seen anyone selling LVDS extension cables.
There are some non-IPS but almost as good UXGA screens here. AFAIK there are a number of Sharp panels that would work with these things. Also AFAIK screens from other laptops like a Latitude C810/C840 or Inspiron 8100/8200 works just fine on a A3xp with the inverter board removed (not the other way around since Latitudes use EDID chips which most screens at that time do not have)
A Satellite pro screen would also work but you need to mod the backlight connector as it is using the old school connector found on older ThinkPads like the 770 series.
600 PII-266 416mb 40gb WXP
T23 PIII 1.13ghz 1gb W7
Lat D830 X9000 8gb 128gb WSXGA+ Ultrasharp fp W10
T530i 15.6" i7 16gb fp W10
A30p PIII 1.2 1gb W7 (IDTech)
T43p 2.26 2gb fp W10 (Sharp)
Lat C840 P4-2.5 2gb 60gb W7 (Ultrasharp)
- Admin Emeritus
- Posts: 21530
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Dublin, Éire
Initially I used similar extenders (same P/N, but with white cables) from them for my LED-mods.
But then PChub changed suppliers and those 'new' pink ones are sloppily soldered and need reworking before use.
Plus my LED-mods no longer need them!
Ireland is on FULL lockdown till December 2020!
Covid-19: Mask it or Casket!
Check out The Boardroom for Mods and Other Services.
- Similar Topics
- Last post
Who is online
Users browsing this forum: Bing [Bot] and 13 guests