Switched to Win7 (64bit) -- what backup software to use?

Windows 7 on ThinkPads
Post Reply
Message
Author
rlcarr
Posts: 17
Joined: Tue Nov 25, 2008 9:58 pm
Location: Arlington, MA

Switched to Win7 (64bit) -- what backup software to use?

#1 Post by rlcarr » Sat Feb 20, 2010 4:38 pm

A few days ago I switched my T500 over to Win7 (64 bit) via clean install (installed new hard drive and installed Win7 on that.)

I now have things re-installed/migrated from the old system and it's time to do a backup (and begin regular backups).

My question is what backup/restore software should I use and what the pros/cons are of each.

I already have the Windows 7 backup software that came with the OS. I can download Lenovo's Rescue and Recovery software whenever I want to. So those are already at hand. Or I could use a 3rd-party utility such as Acronis's True Image 2010.

I've already discovered that Win7 Backup won't make a system image on a network backup location if that network share isn't underlyingly NTFS, so that's a strike against Win7 Backup.

So, what do you all use and what are the good and bad points of it?
T530 -- Win7 64bit

K0LO
Senior Member
Senior Member
Posts: 659
Joined: Wed Sep 07, 2005 12:14 pm
Location: State College, PA, USA

Re: Switched to Win7 (64bit) -- what backup software to use?

#2 Post by K0LO » Sat Feb 20, 2010 10:21 pm

rlcarr:

I've been a fan of Acronis True Image for quite a while now and use TI version 10 for backing up my ThinkPad monthly to an external USB disk. Backups and restores are done from a VistaPE build that incorporates ATI 10 and DD 10, and a copy of the build is installed on the Windows 7 boot partition for easy access while traveling. This method is my secondary (long-term) backup mechanism.

The primary backup mechanism is a nightly backup to a Windows Home Server box on the home network. This is by far the best backup method that I've used since it's completely automated and very efficient in terms of disk storage requirements. The backup method uses a de-duplication technique that only saves unique clusters in the backup database and can handle up to 10 PCs. It's pretty slick technology and highly recommended if you have an old PC (hardware requirements are quite modest) that can be put into service as the server.

An advantage of the Windows 7 backup method is that the backup is saved in virtual hard disk format, and the resulting .vhd files can be mounted with Windows Disk Management console or Virtual PC, and can be explored with Windows Explorer and files can be extracted easily. However, the whole backup method lacks flexibility and uses storage space quite inefficiently. But it is included with the OS...
Mark

X61T 7764-CTO, Core 2 Duo L7500 LV 1.6 GHz, 4 GB RAM, 120 GB Intel X25M SSD
Multiboot w/Grub4DOS -- Windows 10, MustangPE, PartedMagic
My ex: X41T (2005 - 2009)

ashleys
Junior Member
Junior Member
Posts: 311
Joined: Mon Oct 11, 2004 9:25 am
Location: England

Re: Switched to Win7 (64bit) -- what backup software to use?

#3 Post by ashleys » Mon Feb 22, 2010 3:26 am

I'm now running Windows 7 Professional (32-bit) on my T30 and using Paragon Backup & Recovery Free Edition. The Free Edition supports both 32-bit and 64-bit Windows 7.

I've used Paragon Hard Disk Manager on my desktop for years and the free edition has all the basics I need for the T30.

archer6
Moderator Emeritus
Moderator Emeritus
Posts: 2674
Joined: Thu Mar 09, 2006 10:51 pm
Location: California, USA

Re: Switched to Win7 (64bit) -- what backup software to use?

#4 Post by archer6 » Mon Feb 22, 2010 7:06 am

Another vote for Acronis True Image 10.
Favorites From My ThinkPad Collection

Workstations... T40p ~ T41p ~ T42p ~ T43p ~ T60p ~ T61p ~ W500 ~ W510
T Series..... T22 ~ 30 ~ 40 ~ 41 ~ 42 ~ 43 ~ 60 ~ 400 ~ 500 ~ 510
X Series..... X20 ~ 30 ~ 40 ~ 60 ~ 60s ~ 200 ~ 200s ~ 301
Netbooks... S-10 ~ S-12

pdth
Posts: 10
Joined: Sat Nov 07, 2009 7:15 pm
Location: Castle Pines North, Colorado

Re: Switched to Win7 (64bit) -- what backup software to use?

#5 Post by pdth » Wed Feb 24, 2010 9:09 am

I use Second Copy to synchronize two computers on my local area network, which gives me the ability to use them interchangeably as well as providing a backup. I use iDrive to back up 150GB of my files to the vendor's off-site servers. Both are very simple and robust.

woodpusherghd
Posts: 15
Joined: Sat Jul 07, 2007 9:12 am
Location: Bayside, New York

Re: Switched to Win7 (64bit) -- what backup software to use?

#6 Post by woodpusherghd » Sun Feb 28, 2010 8:09 am

I've been using Acronis True Image to back up a disk image to a drive in the ultrabay. Works well. You can also create compressed partition image files which can be mounted later as a drive.

AMATX
Senior Member
Senior Member
Posts: 500
Joined: Mon Jan 25, 2010 12:17 pm
Location: SFO/HNL

Re: Switched to Win7 (64bit) -- what backup software to use?

#7 Post by AMATX » Wed Mar 03, 2010 8:53 am

Thanks for the tips on Acronis, guys. Just purchased it and the Plus Pack and have run a couple backups in recent days. When using the standard compression, it's really fast working on the SSD drive I just got in a W700. Nice, easy interface, plenty of options on what to do, etc.

I'm only interested in full partition backups, so don't need lots of bells and whistles. However, I've been using an old copy of PQDI(Drive Image, from the old days), and wanted to get current as I'm doing a hardware refresh.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Windows 7”

Who is online

Users browsing this forum: No registered users and 1 guest