Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

Put Edge11 (i3 380u) motherboard into Thinkpad X120e

X100e/X120e/X130e etc. series specific matters only.
Post Reply
Message
Author
vbjpad
Posts: 1
Joined: Thu Aug 23, 2018 1:34 am
Location: Tokyo, Japan

Put Edge11 (i3 380u) motherboard into Thinkpad X120e

#1 Post by vbjpad » Thu Aug 23, 2018 1:41 am

I have Thinkpad x120e with AMD APU and it's quite slow. I can get edge 11 motherboard with i3 380u cpu, that would increase performance somewhat. Would x120e support edge11 motherboard.
Just looking at pictures it seems to have same layout (same ports, screw hole locations etc).

TPFanatic
ThinkPadder
ThinkPadder
Posts: 1133
Joined: Thu Jul 30, 2015 11:29 pm
Location: Boston, Massachusetts

Re: Put Edge11 (i3 380u) motherboard into Thinkpad X120e

#2 Post by TPFanatic » Thu Aug 23, 2018 7:01 pm

Good God you're right. I think you can.
lenovo X230 i5 3320m IPS 8GB
lenovo T430 i5 3320m FHD 8GB
lenovo T500 P9700 WUXGA 8GB


Enable 2 finger scroll on any Synaptics touchpads with registry: http://forum.thinkpads.com/viewtopic.php?f=2&t=122612

DaKKS
Junior Member
Junior Member
Posts: 443
Joined: Tue Dec 14, 2010 1:48 pm
Location: Stockholm, Sweden

Re: Put Edge11 (i3 380u) motherboard into Thinkpad X120e

#3 Post by DaKKS » Fri Oct 19, 2018 12:49 pm

You did not just say that. You didnt... I just put this thing into service again. Now i have to get an edge 11 board and try it out... darn... My nonexistent self control strikes again.
Thinkpad Edge E530 | Intel i7-3610 | Intel HD 4000 | 8GB DDR3-1600 | Intel 330 180GB+64GB Kingston mSATA | 6 cell | Windows 8.1 Pro/Ubuntu 15.04 |
Thinkpad X61s | L7500 | Intel X3100 | 8GB DDR2-800 | Intel 330 180GB + 160GB Samsung | Gobi 3000 | 8 Cell | Windows 7 | Windows XP 64 bit |

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad X1xxe Series”

Who is online

Users browsing this forum: No registered users and 1 guest