Need help with 600x

Older ThinkPads.. from the 600, the 7xx, the iSeries, 300, 500, the Transnote and, of course, the 701
Post Reply
Message
Author
xeye
Posts: 14
Joined: Mon Mar 21, 2005 8:35 am

Need help with 600x

#1 Post by xeye » Tue Apr 12, 2005 8:44 am

i have a 600x and the screen went out and all u get is black you can plug monitor up to it and it works fine so i went and bouth a new screen for it and put in and it sitll does not work can anyone help any ideas on what to try next
Top
Bob Collins
Junior Member
Junior Member
Posts: 279
Joined: Sun Apr 25, 2004 2:16 pm
Location: Palm Beach Gardens, FL

#2 Post by Bob Collins » Tue Apr 12, 2005 10:21 am

I assume you have not toggled the LCD off with the Function key combo? I think it is Alt + F4 or something...
Bob
701C, 600X, T22, G4 Powerbook
Top
JHEM
Admin Emeritus
Admin Emeritus
Posts: 5571
Joined: Thu Apr 15, 2004 8:03 am
Location: Medford, NJ USA
Contact:
Contact JHEM

#3 Post by JHEM » Tue Apr 12, 2005 12:50 pm

Check the switch that detects when the display is closed! It's just above the keyboard towards the left hinge.

Common failure on the 600 series, especially if the unit has been opened up.

Regards,

James
James at thinkpads dot com
5.5K+ posts and all I've got to show for it are some feathers.... AND a Bird wearing a Crown
Top
xeye
Posts: 14
Joined: Mon Mar 21, 2005 8:35 am

#4 Post by xeye » Tue Apr 12, 2005 6:50 pm

i tryed the alt F4 and the hinge they did not work amy more ideas hell the mobo might be bad
Top
Bob Collins
Junior Member
Junior Member
Posts: 279
Joined: Sun Apr 25, 2004 2:16 pm
Location: Palm Beach Gardens, FL

#5 Post by Bob Collins » Wed Apr 13, 2005 7:07 am

Is there any flicker during boot or after? Are you sure the lcd cable is properly and fulyl seated? Just a wild guess. Other than that, I can only assume the mobo may be bad, or at least the video portion is shot....
Bob
701C, 600X, T22, G4 Powerbook
Top
Rob Mayercik
Junior Member
Junior Member
Posts: 262
Joined: Tue Sep 28, 2004 6:50 am
Location: NJ, U.S.A.

#6 Post by Rob Mayercik » Wed Apr 13, 2005 7:25 am

Bob Collins wrote:Is there any flicker during boot or after? Are you sure the lcd cable is properly and fulyl seated? Just a wild guess. Other than that, I can only assume the mobo may be bad, or at least the video portion is shot....
I would have thought that if the video was bad he wouldn't be able to use an external monitor either.

Also, I think it's Fn+F7 to toggle the display modes.

Xeye, have you tried going into EZ-Setup with the external monitor attached and running the Video and/or LCD tests?

Rob
Top
whizkid
ThinkPadder
ThinkPadder
Posts: 1555
Joined: Wed Sep 29, 2004 1:40 pm
Location: Saint Paul, MN
Contact:
Contact whizkid

#7 Post by whizkid » Wed Apr 13, 2005 9:34 am

EZ-Setup on the 600X does not have tests. Download PC-Doctor from IBM for tests.
Machine-Project: 750P, 600X, T42, T60, T400, X1 Carbon Touch
Top
xeye
Posts: 14
Joined: Mon Mar 21, 2005 8:35 am

#8 Post by xeye » Wed Apr 13, 2005 5:44 pm

i will try that and let u know
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad Legacy Hardware”

Who is online

Users browsing this forum: No registered users and 4 guests