Workpad Z50 PCMCIA/Compact Flash hard drive questions
Posted: Thu Mar 26, 2015 11:31 am
I recently aquired a pristine Wordpad Z50 with the 32MB RAM upgrade.
I have a 2GB Compact Flash card. However, it's slow as molassas. On my T60p I get about 7-8MB/s and on my X21 I get like 1-2MB/s. The Z50 is no speed demon, but I'm working on installing NetBSD so any thing that can improve access times would be a plus.
I've looked into the Callunacard PCMCIA drive, but it seems they top out at 520MB. Microdrives top out larger but how fast are they?
I do have a CMS Periphrials "Automatic Backup System" 6GB PCMCIA drive. When I plug it into the z50 in Windows, it powers up but then shuts down after 2-3 seconds & is not detected. When I plug itto the Z50 running the NetBSD installer, it runs for about 5 seconds but powers down. However, NetBSD does detect it and does detect it's removal.
So, does the Z50 not have enough power availble in the Type3 slot to run the drive? It does the same thing on battery or plugged into the charger.
The drive powers up just fine when plugged into my T60p(though the T60p diesn't like it) & works fine in my 390X.
Also, and suggestions or tips for the Z50 would be welcome.
Thanx
I have a 2GB Compact Flash card. However, it's slow as molassas. On my T60p I get about 7-8MB/s and on my X21 I get like 1-2MB/s. The Z50 is no speed demon, but I'm working on installing NetBSD so any thing that can improve access times would be a plus.
I've looked into the Callunacard PCMCIA drive, but it seems they top out at 520MB. Microdrives top out larger but how fast are they?
I do have a CMS Periphrials "Automatic Backup System" 6GB PCMCIA drive. When I plug it into the z50 in Windows, it powers up but then shuts down after 2-3 seconds & is not detected. When I plug itto the Z50 running the NetBSD installer, it runs for about 5 seconds but powers down. However, NetBSD does detect it and does detect it's removal.
So, does the Z50 not have enough power availble in the Type3 slot to run the drive? It does the same thing on battery or plugged into the charger.
The drive powers up just fine when plugged into my T60p(though the T60p diesn't like it) & works fine in my 390X.
Also, and suggestions or tips for the Z50 would be welcome.
Thanx