Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

365 and 755 LCD Assembly Swap?

Older ThinkPads from the 300, 500, 600, 700 Series, iSeries, Transnote etc.
Post Reply
Message
Author
Thinkpad4by3
Senior ThinkPadder
Senior ThinkPadder
Posts: 2670
Joined: Sun Aug 09, 2015 9:25 am
Location: N. Bellmore, ny

365 and 755 LCD Assembly Swap?

#1 Post by Thinkpad4by3 » Sun Jun 11, 2017 3:59 pm

Could you take a LCD Top from a 755 and put it on a 365. Say you had a 365ED and put a 755C LCD assembly because DSTN is awful.
Thinkpad4by3's Law of the Universe.

The efficiency of two screens equally sized with equal numbers if pixels are equal. The time spent by a 4:3 user complaining about 16:9 is proportional to the inefficiency working with a 16:9 display, therefore the amount of useful work extracted is equal.

AlphaKilo470
Moderator Emeritus
Moderator Emeritus
Posts: 2762
Joined: Sun Nov 28, 2004 1:42 pm
Location: Atlanta, GA
Contact:

Re: 365 and 755 LCD Assembly Swap?

#2 Post by AlphaKilo470 » Sat Jun 17, 2017 9:50 am

A lot of the mid 90s models had similar parts but were just different enough to make parts swaps difficult. I know the 750s and 360s used the same parts but with different fittings. The 365 used the same shell as the 360 but with modifications. If you want to modernize a 360 or 750/755, your best bet is to use modules from a 760 which are backwards compatible and in a more compact form. The exception in battery. The 760 batteries work in Pentium model 755CDs and CXs.
Latitude E7250: i5 5300U 2.3ghz, 12gb RAM, 12" 1080p touch, 256gb SSD, Win 10, Linux Mint 18.2
HP Compaq 6910p: 2GHZ C2D T6400, 4gb RAM, 14.1" WXGA, 500gb WD Blue, Linux Mint 18.2
ThinkPad T60: 2GHZ CD T2500, 2gb RAM, 14.1" XGA, 60gb 7k100, Win 7 Ult

danikayser84
Sophomore Member
Posts: 130
Joined: Thu Mar 20, 2014 8:55 pm
Location: Albany, NY

Re: 365 and 755 LCD Assembly Swap?

#3 Post by danikayser84 » Tue Jul 04, 2017 9:24 pm

365 and 755 are not in the same product family/chassis, but there's a possibility the panel itself from the 755 line will actually fit and work in a 365 (this involves opening the display assembly to remove the panel, inverter and other parts)

One of my 770 machines had a bad CCFL so I took out a cracked 765 screen and saved the CCFL out of it and replaced the CCFL in my 770 and now it appears to be working fine (screen still blanks on occasion, but not sure if it's an inverter or switch issue)
Current: T440p (Win10), W500 4058-CTO (Win10), T61 8892-01U (Win2000), Semi-Retired: T61 8892-01U (Win10)
Museum/Retired: T400, Z60m, T43, T42, T30, T23, A30, A31p, 600X, 600E, 380ED, 770Z, 560Z, 765D, 755CX, 755CD
Others: Dell D630, MacBook Pro Mid-2012, PowerBook G3 Pismo, AlBook 15"/1.5G

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad Legacy Hardware”

Who is online

Users browsing this forum: No registered users and 7 guests