Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

TP 600X recovery cd not working?

Older ThinkPads.. from the 600, the 7xx, the iSeries, 300, 500, the Transnote and, of course, the 701
Post Reply
Message
Author
Jefferson
Posts: 11
Joined: Fri Dec 03, 2010 6:05 pm
Location: Denver, CO

TP 600X recovery cd not working?

#1 Post by Jefferson » Thu Mar 14, 2019 6:47 pm

I have Thinkpad 600X and I was able to get the factory recovery ISO thanks to two generous members here.

However, it appears that those ISOs are not working. I got the recovery ISO for W98 from those two members. While they appear to be bit-to-bit identical,

I created two CDs anyways but neither works. I'm aware that the W98 recovery has some issues and is supposed to halt in the middle of the process.

But in my case, after it boots and loads the necessary CD drivers, it asks me to hit "enter" to continue the recovery process. I hit enter and it does nothing. It stops right there...

I know my hardware is fine because one member also sent me the recovery for W2K and it installs just fine without an issue.

I also tried smaller hard drive (40gb at first, and then 3gb because sometimes the recovery cds can't deal with larger hard drive) but the result were the same.



has anyone received recovery iso for 98 from the members here and succeeded in recovering the system to the factory default?

fultontech
Sophomore Member
Posts: 183
Joined: Fri Jan 02, 2015 10:38 am
Location: Henderson, NV USA
Contact:

Re: TP 600X recovery cd not working?

#2 Post by fultontech » Thu Mar 14, 2019 7:24 pm

Unfortunately I can't find the notes I made to finish the install. There are about 4 or 5 large zip files on that CD and it was either the 3rd or 4th one that has the bad file inside it causing it to hang during the copy files to disk phase of the restore.
As I recall, if you break or exit out of the process and execute the commands manually without attempting to overwrite the one bad file, the restore will eventually complete. You just have to keep pressing the letter to skip files.
The drive letters get reassigned and it was a goofy xcopy string, but it's all it the bat and config files.
I thought I saved or posted the steps somewhere, but I can't seem to locate them.
IBM P75
IBM ThinkPad 700, 720C, 750Cs, 360C, 360P, 360CE, 360PE, 730TE, PC110, 365CSD, 365ED, 701Cs, 820, 600X, 770X, 240, T30
IBM RS/6000 43P 150
Lenovo ThinkPad X41T, X61T, X200T, X201T, X220T, X230T, X280
Lenovo ThinkCenter M92p Tiny, M900 Tiny

Jefferson
Posts: 11
Joined: Fri Dec 03, 2010 6:05 pm
Location: Denver, CO

Re: TP 600X recovery cd not working?

#3 Post by Jefferson » Sat Mar 16, 2019 9:52 am

Thanks for your help and comment.

Actually, I do have the text file that's included by someone stating the problem during the installation and how to get around it.

However, I think I'm experiencing a different problem.

The known problem seems to happen during the installation. In my case, the process never even gets started; it just quits when I hit "enter" to start the process.

At this point, I can really use a comment from someone who successfully ran the factory-recovery process on 600X in recent times...

Thanks again!

pkiff
Moderator
Moderator
Posts: 1477
Joined: Wed May 05, 2004 9:17 am
Location: Toronto, Canada

Re: TP 600X recovery cd not working?

#4 Post by pkiff » Sun Mar 17, 2019 7:35 am

I don't recall if I ever ran the recovery process on one of my 600X's. But if you decide to give up on the recovery CDs and install Windows 98 from scratch, then here is an old set of instructions you can try following:
http://thinkpads.kiff.ca/600x/install_w98se

Many of the links on that page may now be broken. And if I were doing this today, I would probably look for a more recent fan-made service pack for Windows 98, but I haven't kept up with the Windows 98 fan scene, so I have no idea who might be maintaining a good all-in-one update service pack these days.

Phil.
X1 Carbon Tablet (3rd Gen) · W520 · T60p UXGA · Legacy: X61T SXGA+, X60T, 600X, 770Z SXGA
Nostalgic for: 600X PIII 850MHz in a SelectaDock III with 64MB Voodoo 5 5500 and Sound Blaster Audigy 5.1.

Jefferson
Posts: 11
Joined: Fri Dec 03, 2010 6:05 pm
Location: Denver, CO

Re: TP 600X recovery cd not working?

#5 Post by Jefferson » Sun Mar 17, 2019 7:39 pm

hi, pkiff,

i'm leaning toward fresh windows install rather than factory recovery as you suggested.
your guide is awesome! it will be immensely helpful.

thank you so much!

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad Legacy Hardware”

Who is online

Users browsing this forum: No registered users and 9 guests